Professional Documents
Culture Documents
Driving Pile Pressing Pile: Piling Master Plan
Driving Pile Pressing Pile: Piling Master Plan
17-AP2
17-C1 05-G 05-H 05-H1 05-J 05-J105-J2 05-K 05-K1 05-L 05-L1 05-M
06-AP2 EXISTING G EXISTING BENCH MARK COORDINATE SCHEDULE
14-L
06-B
COORDINATE (M) (ACCORDING TO ASSUMPTION COORDINATE) R1
R1
7
0
4
.5
3
7
0
4
.5
3
NOTE:
Y DIRECTION IS EQUIVALENT TO TRUE NORTH TBM 02
14-07b 14-07a
05-11
REFER No 01-S_PLN17_20-S01 FOR DETAIL REFER No 02-S_PLN17_20-S01 FOR DETAIL BORE HOLE COORDINATE SCHEDULE
14-18 14-19 14-20 14-21 14-23 14-24 14-25 14-26 14-27 14-30 14-31 14-32 14-32a 14-32b
14-I
COORDINATE (M) (ACCORDING TO ASSUMPTION COORDINATE)
BORE HOLE X Y
02-A2 02-A1 02-A 02-B 02-C 02-D 02-E 02-F 02-G 02-AP1 03-A 03-B 03-B1 03-FFF
03-C 03-D 03-F1 03-F 03-F2 BH1 -152389,4525 185299,8994
01-A 01-B 01-C 01-D 01-D' 01-E 05-10 14-I' BH2 -112170,0920 185675,4116
02-06
01-AP1 01-AP2 BH3 -158948,9698 131279,7162
03-AP1 BH4 -114479,4216 129731,7748 Keyplan
14-Q 05-09 BH5 -32770,0429 98455,6457
01-07 02-05 03-31 08-04 08-AP3 14-R
14-H 08-AP1 BH6 28863,8568 189608,2910
BH7 88771,6259 186421,2495
08-03 BH8 25148,5508 123639,0828
03-30 BH9 91102,2608 119689,4831
01-06 14-O
02-04 03-AP2 BH6
BH10 20723,9291 39105,7135
BH7 REFER No 08-S_PLN17_20-S01 FOR DETAIL BH11 83189,1483 36565,1988
01-05a 08-02
03-29
01-05
04-A
14-A EXISTING 07-04
05-AP2
05-AP3
28466,9169
21822,3288
218469,3099
85835,6435
05-AP4 -23956,8852 71408,1152
04-AP1 03-17
REFER No 09-S_PLN17_20-S01 FOR DETAIL 05-AP5 -25708,0944 36451,9532
04-B 07-05 05-AP6 95892,8133 65403,9693
05-04
05-AP4
05-AP6
00-AP 4
REFER No 00-C_DEN00_00-S27 FOR DETAIL
00-AP 5
10-D - All Dimensions are in millimeters (mm) and indicated levels in millimeters (mm).
BH11 - All drawings to be read in conjuntion with the Architectural, Structural, -Civil, -and Mechanical & Electrical drawings.
- Drawings are not to be scaled; written dimensions should be followed and verified with the details.
BH10 - Indicated Finished Floor Level of the buildings is 0.00 = +10.000 National level.
- Building locations (corners) are fixed with the relevant UMT coordinates and related to the coordinates of Bench mark 1 (TBM 01)
and Bench mark 2 (TBM 02).
- Pre Engineered Building Systems:
a) Steel superstructure of the Parkaging and Full Product Store Building (05), FST & BBT Tanks (04), Malt intake building (01),
Brewhouse (02) and Water treatment plant (06), Car & bike parking (15) will be desinged, fabricated and delivered by the Pre
05-02 Engineered Building supplier.
b) Steel rigid roof beams of, Service Block extension (03), Chemical Store Building (09) will be designed, fabricated and delivered by
the Pre Engineered Building supplier.
en zijn eigendom van HaskoningDHV Nederland B.V.. Niets van deze tekening mag zonder voorafgaande schriftelijk toestemming van
- Pipe bridges: Pipe bridges as indicated on the drawings will designed, fabricated and delivered by the Pre Enginneered Building
© 2013 HaskoningDHV Nederland B.V. Alle intellectuele eigendomsrechten waaronder het auteursrecht op deze tekening berusten bij
05-AP5 supllier.
HaskoningDHV Nederland B.V. worden verveelvoudigd en/of openbaar gemaakt op welke wijze ook of worden gebruikt voor enig
05-AP8 - All equipment and equipment related building services are indicative. Exact dimensions and positions still to be determined.
05-01c
E 28.05.2015 N.Q.Tuyen N.Q.Tuyen Construction Final Update coordinate of storm collection pit
D 21.05.2015 N.Q.Tuyen N.Q.Tuyen Construction Final Add pile plans of storm collection pit and weight bridge.
C 19.05.2015 N.Q.Tuyen N.Q.Tuyen Construction Final Extend 2m wide in building 06
05-01b B 09.04.2015 N.Q.Tuyen N.Q.Tuyen Construction Final Revised piling layout & updated piling playout of building 07
A 12.03.2015 N.Q.Tuyen N.Q.Tuyen Construction Final Updated assumption point coordinate
05-A 05-B 05-C 05-D 05-E 05-F 05-G 05-H 05-H1 05-J 05-J105-J2 05-K 05-L 05-L1 05-M Client: Location:
Phnom Penh
Country:
Cambodia
PRESSING PILE DRIVING PILE
Project name: Subject:
Y
PILING MASTER PLAN 0,0000 HaskoningDHV Vietnam CO., LTD. Size: A0 +3 Stage: Construction Design
0,0000 a company of: 236 / 26C Dien Bien Phu Street
As
Mining
E: info@vn.rhdhv.com
TMB.01 I:www.royalhaskoningdhv.com
Drw.Nr.: 00_PLN17_20-S01