Professional Documents
Culture Documents
Valves Selection Guide
Valves Selection Guide
Engineering ToolBox - Resources, Tools and Basic Information for Engineering and Design of Technical Applications!
Custom Search
- the most efficient way to navigate the Engineering ToolBox!
The suitability of a valve for a particular application is decided by the materials used in relation to the conveyed fluid as well as its mechanical design. The
table below can be used as a valve selection guide.
https://www.engineeringtoolbox.com/valve-selection-guide-d_35.html 1/5
4/15/2019 Valves Selection Guide
Conveyed Fluid Nature of Fluid Valve Function Type of Disc
Pinch
Abrasive Powder On/Off,
Squeeze
(Silica, etc) Control valve, modulating
Spiral sock
Solids Pinch
On/Off, Gate
Lubricating powder (graphite, talcum, etc
Control valve, modulating Spiral sock
Squeeze
Sponsored Links
Related Topics
Piping Systems - Dimensions of pipes and tubes, materials and capacities, pressure drop calculations and charts, insulation and heat loss
diagrams
Control Valves - Control Valve terminology, bodies, trim, flow characteristics, Cv and Kv sizing, noise, actuators and positioners
Valve Standards - International standards for valves in piping systems
Control Valves and Equipment - Sizing and dimensions of control valves & equipment in steam and condensate systems
Related Documents
ASME - Valve Standards - An overview of the American Society of Mechanical Engineers - ASME - valve standards
ASTM - Valve Standards - An overview of ASTM International - American Society for Testing and Materials - valve standards
Control Valves and Flow Characteristics - Relationship between control valve capacity and stem move
Diaphragm Valves and Diaphragm Materials - Typical diaphragm materials and their main properties when used in diaphragm valves
Flow Coefficients - Cv - and Formulas for Liquids, Steam and Gases - Online Calculators - Flow coefficient and proper design of control
valves - Imperial Units
ISO Valve Standards - An overview of ISO - International Organization for Standardization - valve standards
Leakage Classification of Control Valves - Seat leakage classification through control valves
Safety Valve Standards - An survey of international safety valve standards. The most common used standards in Germany, UK, USA, France,
Japan, Australia and Europe
Slurry Transport - Minimum Flow Velocity - Avoid settling of solids in slurry transport systems with flow velocities above certain levels
Steam Control Valves - Calculating Kv Values - Design of steam control valves and their Kv values
Valve Abbreviations - Common US valve abbreviations used in drawings and documentation
Valve Authority - The valve authority expresses the ratio between pressure drop across the control valve compared to total pressure drop across
the whole system
Valve Types - Classifications of valves
Weir Diaphragm Valves - Flow Coefficients - Cv - and Flow Factors - Kv - Typical flow coefficients - Cv - and flow factors - Kv - for weir
diaphragm valves
Tag Search
en: valve selection guide
Sponsored Links
https://www.engineeringtoolbox.com/valve-selection-guide-d_35.html 2/5