Professional Documents
Culture Documents
Cho Seungbae - G9-Dj-C-Unit3-Air Filter
Cho Seungbae - G9-Dj-C-Unit3-Air Filter
Grade:
Here you will describe the steps required to make your product.
Grade:
Here is where you will take notes about the work you’ve done during at least 4 workshop
days.
May 5th,
2020
I made a main body of air purifier and put the fan on the top of
the main body.
May 14th, 2020
May 15th,
2020
I put a switch and net that protects the blades and finger on the
fan.
Grade:
You need to annotate your final product image and describe the features you set out to
achieve in the Design Specifications.
Grade:
Here is where you’ll describe why your plan deviated from your original product idea in
B.4.
I added net on the fan I added one more layer which is net to
protect the users not to put their body parts
like fingers, or other objects that might
interrupt the spinning fan.
I divide a filter layer into I divided into two parts because users need to
two layer change the filter when it can’t filter anymore
or dirty, so by dividing into two layers, users
can disassemble the layer and change the
filtering material
I added switch under the fan I forgot to put the switch on the first design,
so I put the switch. The reason why I put the
switch under the fan is if it is placed on the
fan, it can easily turn on and off by other
factors, so I put it under the fan, then it’s
quite uncomfortable to the users, but it’s
more clear to turn on and off the air purifier.
I made a thinner filter layer I thought I made a layer too thick
unnecessarily, so I changed the filter layer
thinner.