Professional Documents
Culture Documents
JF Fill in The Blanks
JF Fill in The Blanks
1. With the use of Jigs and fixture total cost of production ________
Ans:- Decreases
2. With the use of Jigs and fixture rate of production will _________
Ans:- Increase
3. Jigs and fixture increases the accuracy of the parts.(True/False)_________
Ans:-True
4. With the use of Jigs and fixture quality control expenses will_______
Ans:- Reduce
Ans:-True
Ans:-Drilling
Ans:-12
Ans:-Mass
Ans:-12 Degrees
Ans:-Indexing
Ans:-Fixture
14. To prevent wrong loading of work piece ____must be done.
Ans:-Fool proofing
Ans:-5
Ans:-Linear Bush
Ans:-Fixture
Ans:- Jig
19. _________type of jig is used for machining in more than one plane
Ans:-Box jig
21. ______holds the workpiece securely in jig or fixture against the cutting forces
Ans:-Clamping device.
22. Principle of _________states that “In order to achieve the maximum accuracy in location
the locating points should, therefore, be placed as far apart from one another as
it is possible”.
Ans:-Extreme positions
23. Example of quick acting clamping______
Ans:-Cam operated clamp
24. ______material is used commonly for making locating and clamping devices.
Ans:-High Carbon Steel
25. ______type of jig suits best for drilling of holes in hollow cylindrical componenets,
With relatively smaller outside and inside diameters, such as bushes
Ans’;-Pot Type jig