Professional Documents
Culture Documents
HEALTH POT
MODEL: EHP-G1583G(RD)
EHP-G1584G(RD)
Owner’s Manual
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate.
1
IMPORTANT SAFEGUARDS
When using this appliance, basic precautions should always be followed, including the following:
2
SPECIAL SAFETY INSTRUSTION FOR USING THIS HEALTH POT
1. Use only cold water to boil water.
2. Water level must be filled above the MIN line and below the MAX line.
3. Always power off the base station before removing the health pot.
4. Always ensure that the cover is tightly closed.
5. Never immerse the base station in water or any other liquids.
6. The base station must not become wet.
Egg Tray
CONTROL PANEL
3
OPERATING THE APPLIANCE
1. Place the health pot at the center of the base station. Warning: Please do not power on the
appliance with an empty pot as this will cause damage and deformation to the health pot. Power
on the appliance and you will hear a “beeping” sound. The display screen will show “----“. The
display screen will show water temperature when the power is on without operating.
2. Touch the “ON/OFF” icon and then followed by the cooking function key to select desired
cooking functions.
3. Touch the cooking function key, the display screen will show the default operating temperature
level. After setting the cooking function, the display screen will flash 3 times and start cooking.
4. The sequence of function menu is Water, Tea, Boiled Egg, Noodle, Soup, Porridge, Hot Pot,
Yogurt, Medicated Diet, Wine, Milk, Herbal Tea, Sterilize, Keep Warm, Steam Egg, Coffee, Fruit
Tea, and Milk Powder.
5. To cancel any of the selected cooking function, touch the “ON/OFF” icon.
6. During the cooking cycle, the power level can be changed by pressing the “ADJUST” icon. The
display screen will flash by showing the power level. After setting the power level, the display
screen will flash 3 times and then show the water temperature. The appliance will start to heat
up with power level newly set.
7. When the cooking cycle of the selected function is end, the buzzer will ring 3 times and the
display screen will show the current water temperature. The display will disappear after 1minute.
8. After the cooking has finished, power off and unplug the appliance.
1. Water
Touch the “Function” icon and select “Water”, the display screen will show the current water
temperature and heat up with full power to 100°C. After boiling, you will hear the “beeping”
sound. The base station will shut off automatically with “beeping” sound after another 1 minute
of heating.
2. Tea
Touch the “Function” icon and select “Tea”, the display screen will show the current water
temperature and heat up with full power to 100°C. After boiling, the base station will
automatically turn to low power and continue to heat for 20 minutes before shutting off
automatically with “beeping” sound.
3. Boiled Egg
Touch the “Function” icon and select “ Boiled Egg”, the display screen will show the current
water temperature and heat up with full power to 100°C. After boiling, the base station will
automatically turn to half power and continue to heat for 10 minutes before shutting off
automatically with “beeping” sound.
(Note: Recommend to fill with enough water to cover up to half eggs in egg tray)
4
4. Noodle
Touch the “Function” icon and select “Noodle”. The display screen will show the current water
temperature and heat up with full power to 100°C. After boiling, the base station will
automatically turn to half power and continue to heat for 10 minutes before shutting off
automatically with “beeping” sound.
5. Soup
Touch the “Function” icon and select “Soup”. The display screen will show the current water
temperature and heat up with full power to 100°C. After boiling, the base station will be
automatically turn to half power to heat for 2 minutes and then low power to continue to heat for
2 hours before shutting off automatically with “beeping” sound.
6. Porridge
Touch the “Function” icon and select “Porridge”. The display screen will show the current water
temperature and heat up with full power to 100°C. After boiling, the base station will be
automatically turn to low power to heat intermittently for 30 minutes and switch to keep warm for
2 hours before shutting off automatically with “beeping” sound.
7. Hot Pot
Touch the “Function” icon and select “Hot Pot”. This is a manual function, the display screen will
show 800. The default operating power level is at 800W. The power level can be adjusted by
touching the “Adjust” icon to increase or decrease the power level.
8. Yogurt
Touch the “Function” icon and select “Yogurt” key, the display screen will show the current water
temperature and heat up with low power to 36°C. After that, you will hear the “beeping” sound,
the base station will automatically turn to heat intermittently at low power to maintain the
temperature between 35°C ~ 40°C for 12 hours before shutting off automatically with “beeping”
sound.
9. Medicated Diet
Touch the “Function” icon and select “Medicated Diet” key, the display screen will show the
current water temperature and heat up with full power to 100°C. After boiling, the base station
will automatically turn to low power to heat for 60 minutes and switch to keep warm for 2 hours
before shutting off automatically with “beeping” sound.
10. Wine
Touch the “Function” icon and select “Wine”. The display screen will show the current water
temperature and heat up with half power to 80°C. After that, you will hear the “beeping” sound,
the base station will automatically turn to heat intermittently at low power to maintain the
temperature between 80°C for 2 hours before shutting off automatically with “beeping” sound.
11. Milk
Touch the “Function” icon and select “Milk”. The display screen will show the current water
temperature and heat at low power to maintain the temperature between 45°C ~ 46°C for 2
hours before shutting off automatically with “beeping” sound.
5
12. Herbal Tea
Touch the “Function” icon and select “Herbal Tea”. The display screen will show the current
water temperature and heat up with half power to 100°C. After boiling, you will hear the
“beeping” sound, the base station will automatically turn to low power to heat for 5 minutes and
then keep the water temperature between 80°C ~ 90°C. The base station will shut off
automatically with “beeping” sound after 2 hours.
13. Sterilize
Touch the “Function” icon and select “Sterilize”. The display screen will show the current water
temperature and heat up with full power to 100°C before turning down to half power until boiling.
After boiling, the base station will automatically turn to heat intermittently at half power to heat
for 15 minutes before shutting off automatically with “beeping” sound.
16. Coffee
Touch the “Function” icon and select “Coffee”. The display screen will show the current water
temperature and heat up with full power to 100°C. After boiling, you will hear the “beeping”
sound, the base station will automatically turn to heat intermittently at low power to maintain the
temperature between 87°C ~ 93°C. The base station will shut off automatically with “beeping”
sound after 2 hours.
7
8