Professional Documents
Culture Documents
7 Setup Instructions
1. A computer with at least 3GB RAM, 2GHz CPU, and 4GB storage
https://developer.mulesoft.com/docs/display/current/Hardware+and+Software+Requirements
These are the requirements to run Anypoint Studio.
Port Host
3306 mudb.mulesoft-training.com
61616 54.69.115.37
Note: You can use telnet to test the availability of these ports. For example, in a
Terminal/Command window, enter the following command and see if it connects:
telnet iltdb.mulesoft-training.com 3306
If you are using Windows and need to install a Telnet Client, see:
https://technet.microsoft.com/en-us/library/Cc771275(v=WS.10).aspx
If you have restricted internet access and cannot access some of these ports and hosts, you
can instead use VirtualBox and a MuleSoft training services image. Instructions for installing
and setting up the image are included below in step 7.
Note: Use these ONLY if you have restricted internet access and cannot access
ports 80, 3306, or 61616.
If you cannot access the ports and hosts listed earlier in this document, download, install, and
set up VirtualBox to run the MuleSoft training services image BEFORE class.
Download and install VirtualBox.
https://www.virtualbox.org/wiki/Downloads
Download the MuleSoft training services image.
http://mulesoft-training.com/mulesoft-training-services.ova
Follow the setup instructions below and/or watch the setup video: https://vimeo.com/123113815.
After downloading and installing VirtualBox, open it and select File > Import Appliance. Browse
to the mulesoft-training-services.ova file you downloaded. After the image is imported, you
should see a mulesoft-training-services virtual machine listed in the VirtualBox Manager.
Double-click the mulesoft-training-services virtual machine to start it. The virtual machine needs
to be running to complete the course exercises. Verify the server starts. You do not need to log
in, but if you use SSH the username and password are vagrant. To stop the virtual machine,
right-click it in the VirtualBox Manager and select Close > Power Off.
The virtual machine uses ports 61111, 8112, 4406, 8111, and 2222. If you have any port
conflicts, you will need to change these values. First, power off the virtual machine and then
click the Settings button. Click the Network button and expand the Advanced section. Click the
Port Forwarding button and change any of the host port values as necessary.