Professional Documents
Culture Documents
Shackles
Eyebolts
Eyenuts, Lifting Loops & Concrete
Lifting Eyes
Rigging Screws & Turnbuckles
Wire Rope Terminations
Thimbles
Ferrules
NCG Cable Stockings
Sheave Blocks
Hooks
106 - 147
Shackles Grade M Black Screw Dee Shackles: Unit of Measure - Each
A shackle is used for interconnecting components in lifting,
tensioning and staying systems. A shackle consists of a body, a
removable pin and any applicable locking device.
Types of Shackles
Screw Pin Shackles mainly used for non-permanent
applications.
Bolt with Safety Pin Shackles preferable for long term or
permanent applications or where the load may slide on the pin
causing rotation to the pin. Also used on equipment that may
vibrate to ensure pin does not become dislodged.
Dee Shackles only used for single leg applications - never multi
ORDER CODE
WLL (tonnes)
leg as the body and pin may distort.
Size d (mm)
Weight (kg)
Size d (in.)
Bow Shackles can be used on either single or multi-leg
Closing
W (mm)
Method
D (mm)
L (mm)
applications.
Grade M Shackles generally comply with AS2741. In
accordance with AS2741 shackles should be marked with
://PDQXIDFWXUHUVLGHQWL¿FDWLRQJUDGHRIPDWHULDODQGEDWFK 160638 1/4” 6.35 0.25 10 13 25 Screw 0.09
number.
160629 3/8” 9.53 0.50 13 19 38 Screw 0.18
Grade S Shackles generally comply with Australian Standard
2741 with approximately twice the working load limit of Grade 160630 1/2” 12.70 0.75 16 28 54 Screw 0.37
M Shackles. In accordance with AS2741 shackles should
160631 5/8” 15.88 1.50 19 32 63 Screw 0.66
EHPDUNHGZLWK://PDQXIDFWXUHUVLGHQWL¿FDWLRQJUDGHRI
material and batch number. 160632 3/4” 19.05 2.00 22 38 73 Screw 1.04
Commercial Grade Shackles are not to be used for lifting
160634 7/8” 22.23 3.00 25 44 83 Screw 1.61
purposes.
Stainless Steel Shackles are not to be used for lifting 160639 1” 25.40 3.80 29 51 95 Screw 2.27
purposes.
160640 1 1/8” 28.58 5.00 32 54 105 Screw 3.24
Care & Use
05 - HARDWARE
• Ensure that all markings are clearly legible. Other sizes available.
• Ensure pin is the correct type. Never replace the pin of Tolerances on Dimensions +8% - 5% as per AS2741.
a shackle with a bolt.
Grade M Galvanised Screw Dee Shackles:
• The threads of the pin and body are undamaged and the
Unit of Measure - Each
pin screws freely into position.
• The body and pin is not unduly worn and free from
distortion, nicks, gouges, cracks and excessive wear
and corrosion.
• The pin is screwed tightly with the collar and the pin is
bedded evenly on the surface of the shackle eye.
• The correct type of pin is used for the application.
• A bolt type shackle has a split cotter (safety pin)
attached correctly.
• Shackles should not be heat treated as this may affect
their working load limit.
• Never modify, repair or reshape a shackle by welding,
ORDER CODE
Weight (kg)
Size d (in.)
W (mm)
D (mm)
L (mm)
WWW.BULLIVANTS.COM 107
Grade S Tested Galvanised Screw Bow Shackles: Unit of Measure - Each
ORDER CODE
WLL (tonnes)
Size d (mm)
Weight (kg)
W (mm)
D (mm)
B (mm)
L (mm)
160554 5 0.33 6 10 15 22 0.02
160555 6 0.50 8 12 20 29 0.06
160556 8 0.75 10 13 21 31 0.11
160557 10 1.00 11 17 26 37 0.15
160558 11 1.50 13 18 29 43 0.21
160559 13 2.00 16 21 33 48 0.37
160560 16 3.25 19 27 43 61 0.65
160561 19 4.70 22 32 51 72 1.06
160562 22 6.50 25 37 58 84 1.56
160563 25 8.50 29 43 68 95 2.32
160573 29 9.50 32 46 74 108 3.30
160564 32 12.00 35 52 83 119 4.51
160574 35 13.50 38 57 92 133 5.93
05 - HARDWARE
WLL (tonnes)
Size d (mm)
Weight (kg)
W (mm)
D (mm)
L (mm)
WLL (tonnes)
Size d (mm)
Weight (kg)
w (mm)
D (mm)
B (mm)
L (mm)
160565 13 2.00 16 21 33 48 0.44
160567 16 3.25 19 27 43 61 0.79
160569 19 4.75 22 32 51 72 1.06
160570 22 6.50 25 37 58 84 1.88
160572 25 8.50 29 43 68 95 2.78
160589 29 9.50 32 46 74 108 3.87
160591 32 12.00 35 52 83 119 5.26
160594 35 13.50 38 57 92 133 6.94
160595 38 17.00 41 60 98 146 8.79
160576 44 25.00 51 73 127 178 14.99
160598 51 35.00 57 83 146 197 20.65
160618 57 42.50 63 95 160 222 29.10
160602 63 55.00 70 105 184 267 41.05
05 - HARDWARE
160604 76 85.00 83 127 200 330 62.24
165024 89 120.00 95 146 241 381 110.00
Other sizes available.
Weight (kg)
Size (mm)
Size (in.)
WWW.BULLIVANTS.COM 109
Galvanised Screw Bow Shackles: Unit of Measure - Each
ORDER CODE
Weight (kg)
Size (mm)
Size (in.)
Weight (kg)
Size (mm)
Size (in.)
Weight Each
Nom. Size
A B C D E F H L N C A
(in.)
(kg)
*
160676 1/2 2 0.36 20.6 16.0 47.8 12.7 33.3 30.2 83.5 58.5 12.7 3.30 1.50
160701 5/8 3-1/4 0.62 26.9 19.1 60.5 16.0 42.9 38.1 106.0 74.5 17.5 6.35 1.50
160702 3/4 4-3/4 1.23 31.8 22.4 71.5 19.1 51.0 46.0 126.0 89.0 20.6 6.35 1.50
160703 7/8 6-1/2 1.79 36.6 25.4 84.0 22.4 58.0 53.0 148.0 102.0 24.6 6.35 1.50
160704 18 8-1/2 2.28 42.9 28.7 95.5 25.4 68.5 60.5 167.0 119.0 26.9 6.35 1.50
160705 1-1/8 9-1/2 3.75 46.0 31.8 108.0 28.7 74.0 68.5 190.0 131.0 31.8 6.35 1.50
160706 1-1/4 12 5.31 51.5 35.1 119.0 31.8 82.5 76.0 210.0 146.0 35.1 6.35 1.50
160707 1-3/8 13-1/2 7.18 57.0 38.1 133.0 35.1 92.0 84.0 233.0 162.0 38.1 6.35 3.30
160708 1-1/2 17 8.62 60.5 41.4 146.0 38.1 98.5 92.0 254.0 175.0 41.1 6.35 3.30
05 - HARDWARE
160709 1-3/4 25 15.4 73.0 51.0 178.0 44.5 127.0 106.0 313.0 225.0 57.0 6.35 3.30
160710 2 35 23.7 82.5 57.0 197.0 51.0 146.0 122.0 348.0 253.0 61.0 6.35 3.30
* NOTE: Maximum Proof Load is 2.0 times the Working Load Limit. Minimum Ultimate Strength is 6 times the Working Load Limit.
Dimensions (mm)
WLL (tonnes)*
Weight Each
A +/- 6.35 B C H L O P S T
(kg)
WWW.BULLIVANTS.COM 111
Commercial Grade Shackles Gunnebo Standard Shackle No. 855 :
Galvanised Screw Pin Bow Shackles Commercial Grade: Unit of Measure - Each
Unit of Measure - Each
Weight (kg)
Size (mm)
Standard:
Grade
7HVWFHUWL¿FDWHDQGWUDFHDEOHFHUWL¿FDWHRI
160663 20 Untested 0.80 WKHERZDQGWKHEROWLQ¿QLVKHGFRQGLWLRQ
Other sizes available. Temperature:
• -20°C to 200°C
ORDER CODE
WLL (tonnes)
Nominal Size
kgs/100 pcs
Unit of Measure - Each
Gunnebo
Part No.
160813 6 0.50 7 A085506
160814 8 0.75 13 A085508
160815 9 1.00 17 A085509
160816 11 1.50 25 A085511
160817 13 2.00 42 A085513
Not approved for lifting applications.
160818 16 3.25 70 A085516
ORDER CODE
Standard: Standard:
• U.S. Fed. Spec. RR.C-271/EN-13889 • U.S. Fed. Spec. RR.C-271
• DNV 2.7-1 Type Approval No. • Type IVA Class 3, Grade B
• S-5661 (WLL 2.0 to 25 tonnes) Material:
Material: • High Tensile Steel.
• Special Alloy Steel, • Quenched and Tempered, Grade 8
• Quenched and Tempered, Grade 8 Finish:
Finish: • All parts hot dip galvanised
• All parts hot dip galvanised • Brown colour marking
• Brown colour marking Safety factor:
Documentation: • 5:1
7HVWFHUWL¿FDWHDQGWUDFHDEOHFHUWL¿FDWHRI Documentation:
05 - HARDWARE
WKHERZDQGWKHEROWLQ¿QLVKHGFRQGLWLRQ 7HVWFHUWL¿FDWHDQGWUDFHDEOH
Temperature:
ORDERCODE
WLL (tonnes)
• -40°C to 200°C
Nominal Size
Weight(kgs)
Gunnebo
ORDER CODE
Part No.
WLL (tonnes)
Nominal Size
Weight (kgs)
Gunnebo
Part No.
WWW.BULLIVANTS.COM 113
Gunnebo ROV Shackle No. 860: Unit of Measure - Each RUD VIP Foolproof Shackles - VV - GSCH:
Unit of Measure - Each
Material:
• High Tensile Steel. • Clevis mounting
• Quenched and Tempered • Bolt-pin retained by roll-pin for extra security
Finish:
ORDER CODE
WLL (tonnes)
Chain Size
• Brown colour marking
Safety factor:
(mm)
• 5:1
Documentation: 121911 6 1.5 VV GSCH 6
7HVWFHUWL¿FDWHDQGWUDFHDEOH
FHUWL¿FDWHFDQEHVXSSOLHG 121912 8 2.5 VV GSCH 8
05 - HARDWARE
WLL (tonnes)
Nominal Size
Weight (kgs)
Imperial Nominal
Type Mounting
Mounting WLL
Perpendicular
WLL (tonnes)
0º to 30º WLL
Trunion Type
WLL Axial (t)
Thread Pitch
Size (mm)
(tonnes)
(tonnes)
(tonnes)
(tonnes)
(in.)
164178 M10 3/8” 0.25 0.06 0.12 0.31 0.2 0.12 1.5 0.06
164170 M12 1/2” 0.4 0.1 0.2 0.5 0.32 0.2 1.75 0.15
164172 M16 5/8” 0.8 0.2 0.4 1 0.64 0.4 2 0.28
164184 M20 3/4” 1.6 0.4 0.8 2 1.28 0.8 2.5 0.46
164197 M22 7/8” 2 0.5 1 2.5 1.6 1 2.5 0.85
05 - HARDWARE
164185 M24 1” 2.5 0.62 1.25 3.1 2 1.25 3 1.1
164201 M30 1 1/8” 4 1 2 5 3.2 2 3.5 2.1
164302 M36 n/a 6.3 1.57 3.1 7.9 5 3.1 4 3.7
Reduction factor for single eyebolt use
1 0.25 0.25 0.63 0.4 0.25
BSW Lifting Collared Eyebolts: UNC Thread Lifting Collared Eyebolts: General Purpose Zinc Eyebolts:
Unit of Measure - Each Unit of Measure - Each Unit of Measure - Each
ORDER CODE
ORDER CODE
WLL (tonnes)
WLL (tonnes)
Thread Pitch
Thread Pitch
Thread Pitch
Net Weight
Net Weight
Net Weight
Size (mm)
Size (in.)
Size (in.)
(kg)
(kg)
(kg)
164176 3/8 0.25 16 0.06 164177 3/8 0.25 16 0.06 164191 M8 1.25 0.03
164179 1/2 0.4 12 0.14 164171 1/2 0.4 13 0.15 164263 M10 1.5 0.06
164180 5/8 0.8 11 0.32 164181 5/8 0.8 11 0.28 164193 M12 1.75 0.13
164182 3/4 1.6 10 0.53 164183 3/4 1.6 10 0.46 164278 M16 2 0.21
164286 M20 2.5 0.38
164198 7/8 2 9 0.85 164199 7/8 2 9 0.85
164291 M24 3 0.83
164200 1 2.5 8 1.1 164186 1 2.5 8 1.1
Other sizes available. 164202 1 1/4 5 7 2.2
164203 1 1/2 7 6 3.7
Other sizes available.
WWW.BULLIVANTS.COM 115
RUD Starpoint Eyebolts - Grade 100 - VRS-F: RUD Eyebolt - Grade 80 - RS: Unit of Measure - Each
Unit of Measure - Each
ORDER CODE
• 1 to 32 tonne
C (mm)
D (mm)
• Adjusts to direction of pull
• Can be used for both axial and angular loading
8QLTXHNH\GHVLJQIRUHDV\¿WWLQJ 164445 400 100 12 25 RS-M6
• Available in metric and UNC thread sizes
164255 800 200 12 25 RS-M8
ORDER CODE
K (mm)
L (mm)
K (mm)
L (mm)
B (mm)
D (mm)
E (mm)
C (mm)
H (mm)
T (mm)
Grade
(kg)
05 - HARDWARE
164405 15000 10.9 100 63 222 VLBG 15t M42
164406 20000 10.9 100 73 222 VLBG 20t M48
*Captive bolt: VLBG automatically turns in direction of load
RUD Ring Bolt with Longer Vario Bolts - VLBG: Unit of Measure - Each
ORDER CODE
C (mm)
H (mm)
T (mm)
Grade
(kg)
165466 300 10.9 34 60 75 VLBG 0.3 M8 With Vario Bolt (H Max = 60)
165467 630 10.9 34 77 75 VLBG 0.63 M10 With Vario Bolt (H Max = 77)
165468 1000 10.9 34 91 75 VLBG 1 M12 With Vario Bolt (H Max = 91)
421252 1500 10.9 36 116 85 VLBG 1.5 M16 With Vario Bolt (H Max = 116)
421253 2500 10.9 54 152 110 VLBG 2.5 M20 With Vario Bolt (H Max 152)
421254 4000 10.9 54 176 125 VLBG 4 M24 With Vario Bolt (H Max = 176)
165469 5000 10.9 65 213 147 VLBG 5 M30 With Vario Bolt (H Max = 213)
421255 8000 10.9 82 158 197 VLBG 8 M36 With Vario Bolt (H Max = 158)
421256 10000 10.9 80 198 162 VLBG 10 M42 With Vario Bolt (H Max = 198)
165470 15000 10.9 100 188 222 VLBG 15 M42 With Vario Bolt (H Max = 188)
165471 20000 10.9 100 223 222 VLBG 20 M48 With Vario Bolt (H Max = 223)
RUD Ring Bolt with UNC Bolt (Imperial) - VLBG-Z: Unit of Measure - Each
ORDER CODE
C (mm)
H (mm)
T (mm)
(kg)
WWW.BULLIVANTS.COM 117
RUD Weld-On Load Rings - Grade 100: RUD Uni-Directional Variable Length Swivel Lifting Rings -
Unit of Measure - Each Grade 100 - VWBG-V: Unit of Measure - Each
• 0.3 - 5 tonne
• Designed for loads that need to be turned or rotated
• Will rotate 360° under load
• Thread size M8 - M30
• Oversized load rings
• 1.5 to 16 tonne • Longer bolts available for all sizes
• Multi-directional loading
ORDER CODE
• Weld-on design
WLL (kg)
holding spring
C (mm)
A (mm)
F (mm)
5DWHGFDSDFLW\FDQEHLQFUHDVHGLQVSHFL¿F
lashing applications
• Available with and without internal position holding springs
164407 300 8 29 12 VWBG-V-0.3 M8
ORDER CODE
C (mm)
E (mm)
F (mm)
C (mm)
E (mm)
F (mm)
• 8 - 40 tonne
• Designed for loads that need to be turned or rotated
165473 1500 38 40 13.5 VLBS-1.5 with spring • Will rotate 360° under load
165474 2500 45 48 13.5 VLBS-2.5 with spring • Thread size M36 - M90
• Oversized load rings
165475 4000 51 52 16.5 VLBS-4 with spring
ORDER CODE
F (mm)
WLL F2 (kg)
C (mm)
D (mm)
A (mm)
• 3 to 80 tonne
• Multi-directional loading
• Bolt-On design
164414 400 100 35 11 25 RM-M6 • Load ring manufactured from Grade 80 material
164415 800 200 35 11 25 RM-M8 5LQJIROGVÀDW
164416 1000 250 35 11 25 RM-M10 5DWHGFDSDFLW\FDQEHLQFUHDVHGLQVSHFL¿F
lashing applications
164417 1600 400 41 13 30 RM-M12
164418 3000 750 48 15 35 RM-M14 ORDER CODE
WLL (kg)
164420 6000 1500 55 17 40 RM-M20
D (mm)
L (mm)
05 - HARDWARE
Bolt
164421 8000 2000 70 21 50 RM-M24
164422 12000 3000 85 26 60 RM-M30
164423 16000 4000 130 43 90 RM-M36 164426 3200 48 178 M16 x 50 RBG - 3
164424 24000 6000 130 43 90 RM-M42 164427 10000 65 194 M20 x 70 VRBG - 10
164425 32000 8000 130 43 90 RM-M48 164428 16000 90 270 M30 x 90 VRBG - 16
RUD Weld-On Swivelling Eye Connection - WPP-B: Unit of Measure - Each
• Non swivelling versions available on request
ORDER CODE
G (mm)
B (mm)
C (mm)
D (mm)
A (mm)
E (mm)
B (mm)
C (mm)
D (mm)
A (mm)
E (mm)
F (mm)
WWW.BULLIVANTS.COM 119
RUD PP-B Bolt-On Swivelling: Unit of Measure - Each
ORDER CODE
M (mm)
G (mm)
B (mm)
C (mm)
D (mm)
A (mm)
E (mm)
F (mm)
164429 630 9 65 35 40 105 18 41 12 36 PP-B M12
164430 1500 11 65 35 46 115 24 50 16 41 PP-B M16
164431 2500 13 75 40 61 135 30 61 20 55 PP-B M20
164432 4000 16 95 45 78 172 36 78 24 70 PP-B M24
164433 5000 21 130 60 95 223 45 93 30 85 PP-B M30
164434 8000 24 140 65 100 242 54 102 36 90 PP-B M36
SW (mm)
WLL (kg)
M (mm)
G (mm)
B (mm)
C (mm)
D (mm)
A (mm)
E (mm)
F (mm)
B (mm)
C (mm)
D (mm)
A (mm)
E (mm)
F (mm)
T (mm)
WLL (tonnes)
Weight (kg)
Gunnebo
Part No.
M (mm)
G (mm)
B (mm)
D (mm)
H (mm)
L (mm)
164279 1.0** 72 16 42 55 24 M16 0.4 ELP-M16-8
165028 1.5 ** 72 16 42 57 30 M20 0.5 ELP-M20-8
164292 2.0 ** 88 19 48 70 36 M24 0.9 ELP-M24-8
164297 3.0 ** 106 22 60 84 45 M30 1.4 ELP-M30-8
165029 4.0 ** 127 26 72 100 54 M36 2.3 ELP-M36-8
05 - HARDWARE
Gunnebo RLP Rotating Lifting Point Grade 10: Unit of Measure - Each
Suitable for applications where a conventional lifting point would not be
fully adequate. Intended to be used as a Lifting Point, Lashing Point or Towing
attachment.
• Dismountable open D-ring. Enables assembly of roundsling, master
link, link or hook directly onto the RLP.
• Hexagon-headed screw for easy assembly/disassembly by means
of ordinary wrench.
• Forged in Grade 10 material permits higher WLL than Grade 8 and
DIN 580 eyebolts.
• For lifting with single or multi-leg slings.
• Safety factor 4:1.
• RLP can rotate 360° and articulate 180°.
• Longer bolt can be supplied on request.
WLL (all directions)
Weight (kg)
Gunnebo
Part No.
G (mm)
B (mm)
D (mm)
H (mm)
L (mm)
tonnes
tonnes
WWW.BULLIVANTS.COM 121
Gunnebo SLP Screw-on Lifting Points Grade 80: Unit of Measure - Each
• For use in applications where welding is not possible.
• Forged D-ring and housing in Grade 80 material.
'LVPRXQWDEOHÀDWGHVLJQ
7HVWORDGHGDQG0DJQDÀX[FUDFNWHVWHG
ORDER CODE
WLL (tonnes)
Weight (kg)
Gunnebo
Part No.
M (mm)
B (mm)
C (mm)
D (mm)
H (mm)
R (mm)
T (mm)
L (mm)
165025 1.0 50 72 14 98 55 M14 139 24 0.9 SLP-1T
165026 3.0 58 84 17 114 50 M16 144 29 1.4 SLP-3T
164374 5.0 64 116 22 160 74 M20 203 33 2.9 SLP-5T
Gunnebo Weldable Lifting Point type WLP without Spring Grade 8: Unit of
Measure - Each
Weld-on lifting point for towing, lashing and lifting applications.
• Forged D-ring and housing in Grade 80 material.
7HVWORDGDQG0DJQDÀX[FUDFNWHVWHG
• Flat design
• Can be supplied with or without spring for stay up function.
ORDER CODE
WLL (tonnes)
05 - HARDWARE
Weight (kg)
Gunnebo
Part No.
G (mm)
B (mm)
D (mm)
R (mm)
T (mm)
L (mm)
WLL (tonnes)
Weight (kg)
Gunnebo
Part No.
G (mm)
B (mm)
C (mm)
H (mm)
K (mm)
L (mm)
S(mm)
Mass (kg)
W (mm)
M (mm)
H (mm)
A (mm)
P (mm)
T (mm)
L (mm)
05 - HARDWARE
PWB Grade 80 Weld-On Lifting Point: Unit of Measure - Each
'HVLJQHGIRU¿[HGDQFKRURUOLIWLQJSRLQW
ORDER CODE
Mass (kg)
W (mm)
K (mm)
R (mm)
L (mm)
Mass (kg)
M (mm)
B (mm)
R (mm)
K (mm)
A (mm)
L (mm)
WWW.BULLIVANTS.COM 123
Black Metric Eyenuts: Unit of Measure - Each
BSW Thread Eyenut: Unit of Measure - Each
ORDER CODE
Thread Pitch
Net Weight
Size (mm)
ORDER CODE
Thread Pitch
Net Weight
(kg)
Size (in.)
(kg)
164314 M10 1.5 0.12
164316 M12 1.75 0.18 164320 5/8 11 0.3
164321 M16 2 0.3 164328 1 8 1.20
164207 M20 2.5 0.57 3/8” to 3” available
Other sizes available.
Zinc Metric Eyenuts: Unit of Measure - Each Forged Lifting Loop: Unit of Measure - Each
05 - HARDWARE
Thread Pitch
ORDER CODE
Weight (kg)
Thread Pitch
Nom. Size
Net Weight
Size (mm)
(mm)
(kg)
164173 24 3 1.28
164315 M10 1.5 0.1
20mm & 45mm also available
164317 M12 1.75 0.15
Concrete Lifting Eye: Unit of Measure - Each
164206 M16 2 0.24
Other sizes available.
WLL (tonnes)
ORDER CODE
Thread Pitch
Net Weight
Size (in.)
(kg)
633121 1.3
164319 1/2” 13 0.18 633122 2.5
3/8” to 3” available 633131 5
05 - HARDWARE
Working Load Limits (in tonnes) for symmetrical loading
ORDER CODE
2, 3 or 4 Point
Single Point
Maximum Included Angle
WLL (tonne)
60° 90° 120°
Turnbuckles have the same applications as rigging screws, but generally have smaller size range and shorter adjustment.
7KHPDLQEHQH¿WRIDWXUQEXFNOHLVWKDWLWPD\KDYHDJUHDWHUDELOLW\WREHWLJKWHQHGXQGHUORDG$OVRWKHUHPD\EHDZLGHUVFRSH
for providing means for locking while in service.
Turnbuckles are not designed for continuous adjustment under rated load.
WLL (tonnes)
A (mm) Open
Weight (kg)
Size (mm)
C (mm)
D (mm)
K (mm)
A (mm)
E (mm)
Closed
F (mm)
WLL (tonnes)
A (mm) Open
Weight (kg)
Size (mm)
G (mm)
H (mm)
A (mm)
E (mm)
Closed
F (mm)
J (mm)
WLL (tonnes)
A (mm) Open
Weight (kg)
Size (mm)
C (mm)
D (mm)
K (mm)
A (mm)
E (mm)
Closed
F (mm)
160064 12 340 525 15 35 8.5 230 10 1.00 0.97
160069 16 360 535 20 40 9.0 230 12 1.60 1.36
160071 20 390 555 22 46 10.5 230 16 2.50 2.35
165005 24 555 740 30 58 13.0 360 20 4.00 5.20
160079 M33 628 904 38 75 14.0 380 24 8.00 11.20
Other sizes available.
WLL (tonnes)
A (mm) Open
Weight (kg)
Size (mm)
G (mm)
H (mm)
A (mm)
E (mm)
Closed
F (mm)
J (mm)
05 - HARDWARE
160785 M33 660 936 14.0 380 33 70 24 8.00 9.11
Other sizes available.
Grade L Turnbuckles
Grade L Turnbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
ORDER CODE
WLL (tonnes)
A (mm) Open
Weight (kg)
Size (mm)
B (mm)
C (mm)
D (mm)
K (mm)
A (mm)
Closed
F (mm)
WLL (tonnes)
A (mm) Open
Weight (kg)
Size (mm)
G (mm)
H (mm)
A (mm)
Closed
F (mm)
J (mm)
WWW.BULLIVANTS.COM 127
Grade L Turnbuckles - Clevis (Jaw) & Eye: Unit of Measure - Each
ORDER CODE
WLL (tonnes)
A (mm) Open
Weight (kg)
Size (mm)
G (mm)
B (mm)
C (mm)
D (mm)
H (mm)
K (mm)
A (mm)
Closed
F (mm)
J (mm)
165011 10 235 340 30 14 30 150.0 11 21 7 10 0.30 0.30
160097 12 330 470 36 15 35 190.5 15 30 9 10 0.50 0.50
165012 16 355 490 45 20 40 204.0 17 36 12 12 0.75 0.75
160055 20 390 520 55 22 46 215.5 21 42 14 16 1.25 1.25
160121 24 445 580 59 30 58 232.0 25 51 17 20 2.50 2.50
Other sizes available.
Grade P Turnbuckles
Grade P Turnbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
ORDER CODE
WLL (tonnes)
A (mm) Open
Weight (kg)
Size (mm)
B (mm)
C (mm)
D (mm)
K (mm)
A (mm)
Closed
F (mm)
WLL (tonnes)
A (mm) Open
Weight (kg)
Size (mm)
G (mm)
H (mm)
A (mm)
Closed
F (mm)
J (mm)
WLL (tonnes)
A (mm) Open
Weight (kg)
Size (mm)
G (mm)
B (mm)
C (mm)
D (mm)
H (mm)
K (mm)
A (mm)
Closed
F (mm)
J (mm)
ORDER CODE
Weight (kg)
Weight (kg)
Size (mm)
Size (mm)
Style
Style
160153 5 Eye & Eye 0.02 160158 5 Hook & Eye 0.02
160154 6 Eye & Eye 0.16 160144 6 Hook & Eye 0.16
160148 8 Eye & Eye 0.24 160145 8 Hook & Eye 0.24
160149 10 Eye & Eye 0.36 160146 10 Hook & Eye 0.36
160150 12 Eye & Eye 0.64 160147 12 Hook & Eye 0.64
160151 16 Eye & Eye 1.44 160152 16 Hook & Eye 1.44
160155 20 Eye & Eye 2.55 160156 20 Hook & Eye 2.55
05 - HARDWARE
160160 22 Eye & Eye 3.53 160161 22 Hook & Eye 3.53
160163 25 Eye & Eye 4.34 160157 25 Hook & Eye 4.34
6XSHUEXFNOHV86)HG6SHFLÀFDWLRQV))7%
• Hot dip galvanised steel.
(QG¿WWLQJVDUHTXHQFKHGDQGWHPSHUHGERGLHVKHDWWUHDWHGE\QRUPDOL]LQJ
• Turnbuckles recommended for straight on in-line pull only.
0HHWVWKHSHUIRUPDQFHUHTXLUHPHQWVRI)HGHUDO6SHFL¿FDWLRQV))7%
Type 1, Form 1 - Class 7, except those provisions required by the contractor.
• Proof load is 2.5 times the WLL. Ultimate load is 5 times the WLL.
Superbuckles - Clevis & Clevis (Jaw & Jaw): Unit of Measure - Each
ORDER CODE
WLL (tonnes)
Take up (in.)
Weight (kg)
BB (mm)
M (mm)
G (mm)
B (mm)
K (mm)
N (mm)
A (mm)
E (mm)
J (mm)
Style
165007 3/8 x 6 9.53 x 152 0.54 Jaw & Jaw 9.65 13.7 54 22.1 410 258 441 289 152 0.37
160051 1/2 x 12 12.7 x 305 1.00 Jaw & Jaw 12.70 16.5 70 26.9 775 445 813 483 305 1.09
160052 5/8 x 12 15.9 x 305 1.59 Jaw & Jaw 16.00 20.1 89 33.3 814 478 867 530 305 1.77
160054 3/4 x 12 19.1 x 305 2.36 Jaw & Jaw 19.10 23.9 106 38.1 851 508 917 574 305 2.98
160109 3/4 x 18 19.1 x 457 2.36 Jaw & Jaw 19.10 23.9 106 38.1 1156 660 1222 726 457 3.64
160057 7/8 x 12 22.2 x 305 3.27 Jaw & Jaw 22.40 28.7 123 44.5 892 543 967 618 305 3.71
160128 1 x 12 25.4 x 305 4.54 Jaw & Jaw 25.40 34.0 140 52.5 933 577 1018 662 305 5.53
160135 1-1/4 x 18 31.8 x 457 6.89 Jaw & Jaw 31.80 44.5 183 71.5 1317 796 1423 903 457 11.2
160143 1-1/2 x 18 38.1 x 457 9.71 Jaw & Jaw 38.10 52.3 200 71.5 1359 826 1486 953 457 16.7
160139 2 x 24 51.0 x 610 16.80 Jaw & Jaw 51.00 66.5 301 93.5 1766 1157 1949 1339 610 42.8
160140 2-1/2 x 24 63.5 x 610 27.20 Jaw & Jaw 63.5 76.5 344 113.0 1854 1244 2087 1478 610 75
WWW.BULLIVANTS.COM 129
Superbuckles - Eye & Eye: Unit of Measure - Each
X Closed (mm)
ORDER CODE
WLL (tonnes)
Take up (in.)
Weight (kg)
BB (mm)
M (mm)
K (mm)
N (mm)
R (mm)
A (mm)
S (mm)
J (mm)
Style
160108 3/4 x 12 19.1 x 305 2.3 Eye & Eye 19.1 911 568 943 600 53 25.4 119 304 2.49
160056 7/8 x 12 22.2 x 305 3.27 Eye & Eye 22.4 942 592 980 630 60.4 31.7 130 304 3.27
160130 1-1/4 x 12 31.8 x 305 6.89 Eye & Eye 31.8 1087 719 1145 776 90.5 46 196 304 8.62
Other sizes available.
K Closed (mm)
N Closed (mm)
E Closed (mm)
X Closed (mm)
ORDER CODE
M Open (mm)
WLL (tonnes)
J Open (mm)
Take up (in.)
Weight (kg)
BB (mm)
G (mm)
B (mm)
R (mm)
A (mm)
S (mm)
Style
165009 5/8 x 12 15.9 x 305 1.59 Jaw & Eye 16.0 20.1 89 33.3 838 501 877 541 44.4 22.3 99 304 1.64
160058 1-3/4 x 18 44.5 x 457 12.7 Jaw & Eye 44.5 66 239 86 1407 949 1518 1061 117 60.4 254 457 24.4
165010 1-3/4 x 24 44.5 x 610 12.7 Jaw & Eye 44.5 66 239 86 1711 1102 1823 1214 117 60.4 254 609 27.5
05 - HARDWARE
• Forged from special bar quality carbon steel, suitable
for cold forming. • Forged from special bar quality carbon steel, suitable
6ZDJH6RFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRI for cold forming.
100% based on the catalogue strength of wire rope. 6ZDJH6RFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRI
• Hardness controlled by spheroidize annealing. 100% based on the catalogue strength of wire rope.
6WDPSIRULGHQWL¿FDWLRQDIWHUVZDJLQJZLWKRXWFRQFHUQIRU • Hardness controlled by spheroidize annealing.
fractures (as per directions in National Swaging Brochure). 6WDPSIRULGHQWL¿FDWLRQDIWHUVZDJLQJZLWKRXWFRQFHUQIRU
• U.S. Patent 5,152,630 and foreign equivalents. fractures (as per directions in National Swaging Brochure).
• U.S. Patent 5,152,630 and foreign equivalents.
ORDER CODE
Weight Each
Rope Size*
ORDER CODE
Weight Each
Rope Size*
(mm) (in.)
(kg)
WWW.BULLIVANTS.COM 131
Crosby G-416 Open Spelter Sockets: Crosby G-417 Closed Speltor Sockets:
Unit of Measure - Each Unit of Measure - Each
• Forged Steel Sockets thru 38 mm, cast alloy steel • Forged Steel Sockets thru 38 mm, cast alloy steel
40mm - 102mm. 40mm - 100mm.
6SHOWHUVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJ 6SHOWHUVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJ
of 100%, based on the catalogue strength of wire rope. of 100%, based on the catalogue strength of wire rope.
Ratings are based on recommended use with 6 x 7, 6 x 19, Ratings are based on the recommended use with 6 x 7,
or 6 x 37, IPS or XIP (EIP), XXIP (EEIP), RRL, FC, or IWRC 6 x 19 or 6 x 37, IPS or XIP (EIP) , XXIP (EEIP), RRL,
wire rope. FC or IWRC wire rope.
Structural Strand
Structural Strand
Weight Each (kg)
ORDER CODE
Dia. (mm)
Dia.(mm)
05 - HARDWARE
160745 6-7 1/4 - 4.50 0.50 160757 6-7 1/4 - 4.50 116
160746 8-10 5/16 - 3/8 - 12.0 0.59 160465 8 - 10 5/16 - 3/8 - 12.0 0.34
160478 11-13 7/16 - 1/2 - 20.0 1.02 160466 11 - 13 7/16 - 1/2 - 20.0 0.68
160480 14-16 9/16 - 5/8 12-13 27.0 1.63 160758 14 - 16 9/16 - 5/8 12-13 30.8 1.13
160747 18 3/4 14-16 43.0 2.64 160467 18 3/4 14-16 43.5 1.92
160487 20-22 7/8 18-19 55.0 4.38 160759 20 - 22 7/8 18-19 65.3 3.28
160748 24-26 1 20-22 78.0 7.03 160760 24 - 26 1 20-22 81.6 4.76
160492 28-30 1 - 1/8 24-26 92.0 9.75 160761 28 - 30 1 - 1/8 24-26 100 6.46
160495 32-35 1 - 1/4 - 1-3/8 28 136 14.1 160762 32 - 35 1 - 1/4 - 1 - 3/8 28 136 8.95
160749 38 1 - 1/2 30-32 170 21.4 160763 38 1 - 1/2 30-32 170 13.24
160750 *40 - 42 * 1 - 5/8 33-35 188 24.9 160764 †40 - 42 †1 - 5/8 33-35 188 16.32
160751 *44 - 48 *1 - 3/4 - 1-7/8 36-40 268 37.2 160765 †44 - 48 †1 - 3/4 - 1 - 7/8 36-40 268 25.96
160752 *50 - 54 *2 - 2 - 1/8 42-45 291 59 160766 †50 - 54 †2 - 2 - 1/8 42-45 309 35.83
160753 *56 - 60 *2 - 1/4 - 2 - 3/8 46-48 360 76 160767 †56 - 60 †2 - 1/4 - 2 - 3/8 46-48 360 47.62
160754 * 64 - 67 *2 - 1/2 - 2-5/8 50-54 424 114 160768 †64 - 67 †2 - 1/2 - 2 - 5/8 50-54 424 63.50
160755 *70 - 73 *2 - 3/4 - 2 - 7/8 56-62 511 143 160769 †70 - 73 †2 - 3/4 - 2 - 7/8 56-62 549 99.79
160756 *75 - 80 *3 - 3 - 1/8 64-67 563 172 160770 †75 - 80 †3 - 3 - 1/8 64-67 656 125
ORDER CODE
Net Weight
Max After
factor, proof load and temperature requirements.
Importantly, Crosby products meet other critical
Finish
(mm) (in.)
(kg)
performance requirements including fatigue life, impact
properties and material traceability, not addressed by
ASME B30.26. 160879 Self Colour 6-7 1/4 12 0.2 46812
7\SH$SSURYDODQGFHUWL¿FDWLRQLQDFFRUGDQFHZLWK 160880 Self Colour 8 5/16 18 0.7 46813
ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide
160881 Self Colour 9-10 3/8 18 0.6 46814
05 - HARDWARE
IRU&HUWL¿FDWLRQRI&UDQHV
• Individually magnetic particle inspected. 160882 Self Colour 11-12 7/16 23 1.2 46818
• Pin diameter and jaw opening allows wedge and socket
160883 Self Colour 13 ½ 23 0.9 46819
to be used in conjunction with closed swage and spelter
sockets. 160884 Self Colour 14-15 9/16 30 2.1 46820
• Secures the tail or “dead end” of the wire rope to the wedge, 160885 Self Colour 16 5/8 30 2.1 46821
thus eliminates loss or “Punch out” of the wedge.
• Eliminates the need for an extra piece of rope, and is easily 160886 Self Colour 18-20 ¾ 36 3.8 46822
installed. 160887 Self Colour 22-23 7/8 40 5.4 46823
• The TERMINATOR™ wedge eliminates the potential 160387 Self Colour 24-25 1 46 8.8 46824
breaking off of the tail due to fatigue.
• The tail, which is secured by the base of the clip and the 160888 Self Colour 28 1-1/8 52 12.6 46826
wedge, is left undeformed and available for reuse. 160889 Self Colour 32 1-1/4 59 17.2 46827
• Utilises standard Crosby Red-U-Bolt® wire rope clip.
160890 Self Colour 36 1-3/8 65 20.8 46828
• The 9-10mm thru 30-32mm standard S-421 wedge
VRFNHWFDQEHUHWUR¿WWHGZLWKWKHQHZVW\OH7(50,1$725 160891 Self Colour 38 1-1/2 72 26.5 46829
wedge. 160892 Self Colour 45 1-3/4 78 40.3 43830
• Available with Bolt, Nut, and Cotter Pin.
• U.S. patent 5,553,360, Canada patent 2,217,004 and 160893 Self Colour 50 2 91 66.4 46831
foreign equivalents. 160894 Galvanised 6-7 1/4 12 0.2 46796
160895 Galvanised 8 5/16 18 0.7 46797
ORDER CODE
WWW.BULLIVANTS.COM 133
PWB Forged Closed Swage Wire Rope Socket (Self Colour):
Unit of Measure - Each
• Forged from special bar quality carbon steel with superior hardness
controlled by spheroidize annealing.
:KHQFRUUHFWO\DVVHPEOHG6ZDJHVRFNHWWHUPLQDWLRQVKDYHDQHI¿FLHQF\
rating of 100% based on the catalogue strength of wire rope.
• Recommended for use with 6 x 19, 6 x 37 and IWRC wire rope and are
approved for use with galvanized bridge rope.
• All slings swaged with sockets shall be proof loaded in accordance with
AS1666.1/2009
1275HFRPPHQGHGIRUXVHRQ¿EUHFRUHRIODQJOD\URSH
ORDER CODE
Net Weight
(mm) (in.) Max After
(kg)
*Distributed by PWB Anchor
160910 6-7 1/4 12 0.2 46832
160911 8 5/16 18 0.3 46833
160912 9-10 3/8 18 0.3 46834
160913 11-12 7/16 23 0.7 46835
160914 13 1/2 23 0.6 46836
160915 14-15 9/16 30 1.4 46837
160916 16 5/8 30 1.3 46838
160917 18-20 3/4 36 2.2 46839
160394 22-23 7/8 39 3.1 46840
05 - HARDWARE
Net Weight
(mm) (in.) (mm) (in.)
(kg)
160935 6-7 1/4 - - 0.5 46783
*Distributed by PWB Anchor
160936 8-10 5/16-3/8 - - 0.6 46785
160937 11-13 7/16-1/2 - - 1.1 46786
160938 14-16 9/16-5/8 13 1/2 1.7 46787
160939 18-20 3/4 14-16 9/16-5/8 2.6 46788
160940 22-23 7/8 18-20 11/16-3/4 4.7 46789
160941 24-26 1 22-23 13/16-7/8 7.4 46791
160942 28-30 1 1/8 24-25 15/16-1 10.0 46793
160943 32-35 1 1/4-1 3/8 26-28 1 1/16-1 1/8 14.9 46794
160944 36-39 1 1/2 30-32 1 3/16-1 1/4 20.8 46795
05 - HARDWARE
PWB Steel Swage Sleeve (Zinc Plated): Unit of Measure - Each
ORDER CODE
Net Weight
Rope Size
Max After
(Lbs)
(in.)
(in.)
WWW.BULLIVANTS.COM 135
Wire Rope Grips Thimbles
Wire Rope Grips AS2076: Unit of Measure - Each Thimbles are used at the ends of wire rope to reinforce the
eye and obviate damage and wear to the wire rope from any
connected lifting tackle or other connection.
Types of Thimbles
Wire Rope Thimbles are made from mild steel and are hot
dipped galvanised with blue paint on the tips in accordance
with AS1138.
Commercial Grade Thimbles are not manufactured to any
standard and are made from light gauge material. Normally
used in light applications and supplied in electro galvanised
¿QLVK
Not for lifting applications.
Stainless Steel Thimbles are not manufactured to any
ORDER CODE
Weight (kg)
rope when corrosion could be a cause for concern.
Size (mm)
Solid Thimbles are used for loads that are secured by a bolt or
G (mm)
B (mm)
D (mm)
A (mm)
pin and can be drilled (bored) out to match that pin or bolt, refer
to AS1138.
160002 8 M8 41 22 8 0.06 Wire Rope Thimbles - AS1138: Unit of Measure - Each
G (mm)
B (mm)
H (mm)
A (mm)
F (mm)
J (mm)
Commercial Grade Wire Rope Grips:
Unit of Measure - Each
Not for lifting applications. 160315 8 20 31 12 3.6 9 4.4
160316 10 25 38 15 4.5 11 5.5
ORDER CODE
ORDER CODE
Rope Size
(mm)
Surface (mm)
Width (mm)
Dia. of “U”
Bolt (mm)
Rope Dia.
Bearing
(mm)
160009 10/12 40 52 10
160016 16 46 58 10
Order Code
Rope Size
(mm)
160380 3
ORDER CODE
160374 5
Weight (kg)
Rope Dia.
B (mm)
C (mm)
D (mm)
A (mm)
E (mm)
160373 6
(mm)
160375 8
160330 16 96 71 27 52 17 1 160376 10
160331 20 117 84 29 63 22 1.05 160377 12
160364 28 170 125 44 90 30 4.2 160382 16
Other sizes available. Other sizes available.
05 - HARDWARE
Crosby G-414 Thimbles: Unit of Measure - Each
• Available in Hot Dip galvanized or Stainless Steel (Type 304).
• Stainless steel recommended for more corrosive environments
where greater protection is required.
• Greater protection against wear and deformation of the wire
rope eye.
• Longer service life.
ORDER CODE
(mm) (in.) A B C D E F G H
160774 *6-7 1/4 2.95 55.5 41.4 38.1 22.4 11.2 7.10 1.50 5.85
160775 *8 5/16 5.35 63.5 47.8 46.0 26.9 14.0 8.65 2.05 7.10
160776 *9-10 3/8 9.80 73.0 54.0 54.0 28.7 16.8 10.4 2.80 8.65
160777 11-12 7/16 15.7 82.5 60.5 60.5 31.8 18.8 11.9 3.30 9.65
160778 *13-15 1/2 - 9/16 23.1 92.0 70.0 70.0 38.1 23.4 13.5 3.55 10.4
160779 *16 5/8 34.3 108 82.5 79.5 44.5 26.2 16.8 4.05 12.7
160780 *18-20 3/4 72 127 95.5 96.5 51.0 33.0 19.8 5.60 16.8
160781 22 7/8 81 140 108 108 57.0 37.3 23.9 5.60 19.1
160782 24-26 1 142 156 114 125 63.5 44.5 26.9 6.35 22.4
160783 28-32 1 - 1/8 - 1-1/4 181 178 130 149 73.0 47.8 33.3 6.35 28.7
160784 32-35 1 - 1/4 - 1-3/8 402 230 165 173 89.0 57.2 36.6 9.65 28.7
160785 35-38 1 - 3/8 - 1-1/2 587 229 159 181 89.0 66.5 39.6 12.7 28.7
160786 40 1 - 5/8 771 286 203 207 102 76.2 43.7 12.7 35.1
160787 44 1 - 3/4 805 310 229 216 114 77.7 46.7 12.7 33.3
160788 48-52 1 - 7/8 - 2 1259 384 305 264 152 85.9 53.0 12.7 38.1
160789 56 2 - 1/4 1792 435 356 302 178 98.6 60.5 16.0 41.4
WWW.BULLIVANTS.COM 137
Ferrules
Aluminium Ferrules Copper Ferrules DIN Grade Australoc Ferrules – Grade Hand Swaged Nickel
DIN Grade 3093: 3093: Unit of Measure - Each S505: Unit of Measure - Each Plated Copper Ferrules:
Unit of Measure - Each Unit of Measure - Each
ORDER CODE
ORDER CODE
Size (mm)
ORDER CODE
ORDER CODE
Size (in.)
Size (mm)
Size (mm)
Brand
160207 1.5
160226 3/8
160186 2
160233 1.5
160196 1/2 160220 3 Bridge & Co
160208 2.5
160198 2
160197 5/8 160222 3.2 Dolphin Marine
160209 3
160199 2.5
160227 3/4 160224 4 Dolphin Marine
160187 3.5
160173 3
160289 1 160260 4 Bridge & Co
160188 4
160174 3.5
160290 1-1/8
160211 4.5
160175 4 Hand Swaged Alloy Ferrules:
160293 1-3/4
160189 5 Unit of Measure - Each
160237 4.5
160294 2
160190 6
160176 5
Other sizes available.
160191 6.5
05 - HARDWARE
160164 6
160212 7 Hand Swaged
160200 6.5 Copper Ferrules:
160213 8 Unit of Measure - Each
160177 7
160192 9
160165 8
160193 10
160166 9
ORDER CODE
160214 11
160167 10
Size (mm)
160194 12
160178 11
160215 13
160168 12
ORDER CODE
160195 14 160206 4
160179 13
Size (mm)
160243 32
Size (mm)
160185 34
160201 38
160202 40 165040 16
160203 42 160282 18
160245 44 160285 22
160204 46 160228 26
160205 54 160229 32
6ZDJH%XWWRQWHUPLQDWLRQVKDYHDQHI¿FLHQF\UDWLQJRIEDVHG
on the catalog strength of wire rope.
• Special processed, low carbon steel.
• COLD TUFF® for better swageability.
6WDPSIRULGHQWL¿FDWLRQDIWHUVZDJLQJZLWKRXWFRQFHUQIRUIUDFWXUHV
(as per directions in National Swaging Brochure).
ORDER CODE
100 (kg)
D Max. After
(mm) (in.) A B C E Length*
Swage Dimensions
05 - HARDWARE
160790 1 SB 3 1/8 0.91 10.7 12.7 3.56 10.2 15.5
160791 3 SB 5 3/16 1.81 14.2 17.8 5.08 13.2 21.3
160792 5 SB 6-7 1/4 3.63 17.3 26.9 7.87 14.7 33.5
160793 7 SB 8 5/16 7.26 22.4 28.7 9.14 19.6 33.8
160794 8 SB 9-10 3/8 6.80 22.4 37.6 10.7 19.6 42.9
160795 9 SB 11 7/16 13.6 28.7 41.4 12.2 26.2 49.3
160796 10 SB 13 1/2 22.7 33.3 48.0 14.0 29.5 55.1
160797 11 SB 14 9/16 31.8 36.6 51.3 15.5 32.8 61.2
160798 12 SB 16 5/8 45.4 39.6 61.5 17.0 36.1 73.4
160799 13 SB 18-20 3/4 59 42.7 69.6 20.3 39.6 82.6
160800 14 SB 22 7/8 100 50.8 83.1 23.9 45.7 98.0
160801 15 SB 25-26 1 141 57.2 93.2 26.9 52.1 111
160802 16 SB 28-29 1-1/8 204 65.0 103 30.2 58.4 122
160803 17 SB 31-32 1-1/4 295 71.4 116 33.8 65.0 138
* NOTE: Length is measured from outside end of termination.
WWW.BULLIVANTS.COM 139
NCG Cable Stockings Single Eye “Cap” Style (Tubular): Unit of Measure - Each
Cable stockings are available in a variety of designs to suit
different applications including cable hauling, load restraint,
cable splicing (joining), re-roping cranes and airline or hydraulic
hose restraint.
Our cable stockings are serial numbered, stamped with
LGHQWL¿FDWLRQDQGDQ\SURWUXGLQJZLUHHQGVDUHFRYHUHGZLWK
plastic adhesive to reduce manual handling risks.
Fitting Precautions
1. Always ensure the entire plaited length of the stocking is in
contact with the cable to be hauled.
2. Ease out any ‘bubbles’ or slack in the stocking to ensure
maximum contact of grip to cable. This is the most commonly used type of cable stocking. It is
3. Always fasten the mouth end of the stocking to the cable by ¿WWHGRQWRWKHHQGRIWKHFDEOHLQRUGHUWRSXOOLWLQWRSODFH
means of tie wire or similar. This will guard against accidental
release, especially in the case of a reverse haul.
To Suit Diameter
ORDER CODE
of Cable (mm)
4. Always tape over the fastening at the mouth end to ensure a
smooth transition from stocking to cable.
Variations
• Any sizes outside this range available on request
• 2070 Galvanised Strand OR 316 Stainless Steel Strand
• Copper OR Stainless Steel Ferrules 165130 14-19
• Soft Eye OR Thimbles 165131 19-28
165189 28-40
165196 40-55
Standard Cable Stockings
Lace Up: Unit of Measure - Each 165200 55-75
05 - HARDWARE
165209 75-95
165212 95-120
7KLVW\SHLVDÀDWZRYHQGHVLJQWKDWFDQEHZUDSSHGDURXQGWKH
cable or rope at any position, and secured with a lace. This type
FDQEHXVHGZKHUHLWLVQRWSRVVLEOHWR¿WDWXEXODUVWRFNLQJRYHU
the end of the cable.
To Suit Diameter
of Cable (mm)
FDQEH¿WWHGDQ\GLVWDQFHIURPWKHFDEOHHQG,WVPDLQXVHLV
to support electrical and hydraulic and other hoses in marine,
industrial and mining applications. Also used for strain relief on
trailing supply lines.
165439 14-19
To Suit Diameter
ORDER CODE
of Cable (mm)
165441 19-28
165443 28-40
165445 40-55
165446 55-75
165336 14-19
165447 75-95
165337 19-28
165448 95-120
165190 28-40
165338 40-55
165339 55-75
165340 75-95
165341 95-120
This design has similar properties to the offset eye in that it can
EH¿WWHGWRDQ\SRVLWLRQRQWKHFDEOH7KHH[WUDH\HLVSURYLGHG
WROLIWWKHDVVHPEO\ZKLOHWKHRWKHUH\HLVPDGHRIIWRD¿[WXUH
When hauling with only one eye the breaking strength is greatly
reduced.
to be spliced or joined.
ORDER CODE
of Cable (mm)
To Suit Diameter
ORDER CODE
of Cable (mm)
165432 19-28
165433 28-40
05 - HARDWARE
165434 40-55 165408 10-14
165201 55-75 165409 14-19
165435 75-95 165178 19-28
165436 95-120 165410 28-40
165411 40-55
Specialty Stockings
Heavy Duty (Tubular): Unit of Measure - Each Non Conductive (Tubular): Unit of Measure - Each
ORDER CODE
of Cable (mm)
ORDER CODE
of Cable (mm)
WWW.BULLIVANTS.COM 141
Heavy Duty Graded Weave (Tubular):
Unit of Measure - Each
6WRFNLQJVDUHGHVLJQHGVSHFL¿FDOO\IRUKLJKWHQVLRQKDXOLQJRI
bare or insulated conductor lines. They utilise extra material for
higher breaking strengths at smaller cable diameters, and extra
length for assured grip onto bare metal conductor.
To Suit Diameter
ORDER CODE
of Cable (mm)
165417 8-11
165418 10-15
165419 15-21
165420 20-29
05 - HARDWARE
165421 27-35
165422 32-37
of Cable (mm)
165423 19-28
165425 28-40
165426 40-50
165427 50-60
165428 60-70
165429 70-85
165430 85-100
165431 100-120
ORDER CODE
Head Fitting
PWB Anchor Manually Operated Sheave Blocks
Sheave Dia.
Rope Size
An extensive range of manually operated Snatch and Sheave
%ORFNVKDVEHHQVSHFL¿FDOO\GHVLJQHGIRUXVHZLWK0DQLOODDQG
(mm)
(mm)
Wire Rope. With fully interchangeable sheaves and supplied
with either drop forged swivel hooks or eyes, this range comes
with beckets standard on single and double blocks. 164448 63 10.0 250 Hook 45622
Bronze Bushes and safety latches are also standard across the 164080 75 12.0 250 Hook 45639
range.
164089 100 16.0 500 Hook 45672
PWB Anchor Snatch Blocks - Wire Rope:
Unit of Measure - Each 164098 125 20.0 1000 Hook 45706
164102 150 24.0 1000 Hook 45723
164454 200 32.0 2000 Hook 45757
164455 63 10.0 250 Eye 45614
164456 75 12.0 250 Eye 45631
164087 100 16.0 500 Eye 45664
164457 125 20.0 1000 Eye 45698
05 - HARDWARE
164458 150 24.0 1000 Eye 45715
164459 200 32.0 2000 Eye 45749
Head Fitting
Sheave Dia.
Rope Size
(mm)
(mm)
Weight (kg)
Rope Size
(mm)
Head Fitting
Sheave Dia.
Rope Size
ORDER CODE
Head Fitting
(mm)
(mm)
Sheave Dia.
Rope Size
(mm)
(mm)
164020 63 10 250 Hook 45621
164024 75 12 250 Hook 45638
164017 63 10 250 Hook 45619
164033 100 16 500 Hook 45671
164022 75 12 250 Hook 45636
164042 125 20 1000 Hook 45705
164495 100 16 750 Hook 45669
164460 150 24 1000 Hook 45722
164040 125 20 1000 Hook 45703
203749 200 32 2000 Hook 45756
164496 150 24 1500 Hook 45720
164461 63 10 250 Eye 45613
164497 63 10 250 Eye 45611
164462 75 12 250 Eye 45630
164498 75 12 250 Eye 45628
164031 100 16 500 Eye 45663
164499 100 16 750 Eye 45661
164463 125 20 1000 Eye 45697
164500 125 20 1000 Eye 45695
05 - HARDWARE
Head Fitting
Sheave Dia.
Rope Size
(mm)
(mm)
ORDER CODE
Head Fitting
Sheave Dia.
Rope Size
(mm)
PWB Anchor Double Sheave Blocks – Manilla Rope: PWB Anchor Treble Sheave Blocks – Manilla Rope:
Unit of Measure - Each
144 1300 722 999
Unit of Measure - Each Crosby Snatch Blocks
• Drop forged, heat treated swivel hook or swivel shackle.
• Hook and shackle assemblies on 8” through 14” sizes can
be interchanged.
• Can be furnished with bronze bushings or roller bearings.
3UHVVXUHOXEH¿WWLQJV
• 430 and 431 blocks have exclusive bolt retaining spring to
assure no lost bolts.
• Can be furnished with hook latch.
• 8” and 10” models furnished with dual rated wireline
sheaves.
• Fatigue Rated.
• All sizes are RFID EQUIPPED.
Crosby 419 Snatch Blocks Unit of Measure - Each
ORDER CODE
Head Fitting
Sheave Dia.
Rope Size
(mm)
(mm)
ORDER CODE
WLL (tonnes)*
Bearing Code
164515 125 20 1000 Hook 45709
Weight Each
Sheave Dia.
Wire Rope
Size (mm)
164516 150 24 1500 Hook 45726
05 - HARDWARE
164517 75 12 250 Eye 45634
(kg.)
(in.)
164518 100 16 750 Eye 45667
165450 *3 BB 8-10 2 1.90
164519 125 20 1000 Eye 45701
165342 **3 BB 8-10 2 1.81
164520 150 24 1500 Eye 45718
165343 **4-1/2 BB 10-13 4 5.44
PWB Anchor Trawl Blocks: Unit of Measure - Each
165344 6 BB 16-19 8 12.6
165345 6 RB 16-19 8 12.6
165346 8 BB 16-19 8 15.4
165347 8 RB 16-19 8 15.4
165348 10 BB 16-19 8 19.1
165349 10 RB 16-19 8 19.1
165350 12 BB 16 8 22.2
165351 12 RB 16 8 22.2
165352 12 BB 19 8 22.2
• Manufactured with*Distributed
the highestby PWBsteel
quality Anchoravailable 165353 12 RB 19 8 22.2
• Corrosive resistant for increased block life in a salt water 165354 14 BB 16 8 25.4
environment
%ORFNVDUHVXSSOLHGZLWKDSUHVVXUHOXEHG¿WWLQJIRUD 165355 14 RB 16 8 25.4
longer lock life 165356 14 BB 19 8 25.4
• Bearings are sealed for increased block life and
performance 165357 14 RB 19 8 25.4
• Each block is individually tested for maximum safety
165358 16 BB 19 15 61
ORDER CODE
165359 16 RB 19 15 61
Sheave Dim.
Net Weight
Thickness
165360 16 BB 22 15 61
Type
165361 16 RB 22 15 61
Rim
(in.)
(kg)
165362 18 BB 22 15 70
164521 Needle 5 6 2¾ 11.9 46732
165363 18 RB 22 15 70
164522 Tapered 10 8 2 7/8 19.7 46741
165364 18 BB 26 15 70
164523 Bronze Brushed 5 6 2¾ 14.2 46736
165365 18 RB 26 15 70
WWW.BULLIVANTS.COM 145
Crosby 431 Snatch Blocks: Unit of Measure - Each Crosby M-491 Tower Derrick Hoist Block:
Unit of Measure - Each
ORDER CODE
WLL (tonnes)*
Bearing Code
Weight Each
$ZLGHYDULHW\RIFRQ¿JXUDWLRQV
Sheave Dia.
Wire Rope
5ROO)RUJHGVKHDYHVZLWKÀDPHKDUGHQHGJURRYHV
165370 20 12 BB 26 52
• Recessed sideplate design reduces the gap between the
165371 20 12 RB 26 52 sheave rim and the sideplate, allowing the sheave assembly
to be captured in the block if loss of center pin occurs.
165372 20 12 BB 28 52 • Sealed tapered roller bearings extend the life of the center
165373 20 12 RB 28 52 pin and bearings, and allows for faster line speeds than
recommended with standard snatch blocks.
165374 20 14 BB 26 61 6KDFNOH¿WWLQJVZLYHOVIRUHDV\SRVLWLRQLQJ
165375 20 14 RB 26 61 • Suitable for hoisting personnel, contingent upon all
employees, including the winch operator, being trained to
165376 20 14 BB 28 61 follow any applicable Federal, local and industry standards.
• Tugger/Derrick applications: API RP54
165377 20 14 RB 28 61
• Tower applications: OSHA directive CPL 2-1.36
165378 25 18 BB 26 118 • Holes through side plates are available for secondary block
securement device.
165379 25 18 RB 26 118 0DQXIDFWXUHGE\DQ$3,4&HUWL¿HGIDFLOLW\
165380 25 18 BB 28 118 7\SH$SSURYDODQGFHUWL¿FDWLRQLQDFFRUGDQFHZLWK
ABS 2006 Steel Vessel Rules 1-1-17.7, and ABS Guide
165381 25 18 RB 28 118 IRU&HUWL¿FDWLRQRI&UDQHV
• All sizes are RFID EQUIPPED.
165382 30 20 BB 28 181
ORDER CODE
WLL (tonnes)*
165383 30 20 RB 28 181
Weight Each
Sheave Dia.
Wire Rope
Size (mm)
165384 30 20 BB 32 181
(mm)
(kg.)
165385 30 20 RB 32 181
165386 30 24 BB 28 215
165407 4 203 10 - 13 16
165387 30 24 RB 28 215
165390 8 254 10 - 13 25
165388 30 24 BB 32 215
165391 8 254 13 - 14 25
165389 30 24 RB 32 215
165392 12 254 13 - 14 25
165393 12 356 16 43
165394 12 356 19 43
165395 15 406 22 68
165396 15 406 25 48
*Ultimate Load is 4 times the Working Load Limit
ORDER CODE
WLL (tonnes)
Head Fitting
To Suit Wire
Sheave Dia.
Weight (kg)
Gunnebo
Size (in.)
Part No.
(mm)
164075 4 100 3/8-1/2 Swivel Hook JSB04S04BS 7
Other sizes and capacities available.
Gunnebo Johnson Swivel Shackle - Snatch Block Wire: Unit of Measure - Each
ORDER CODE
WLL (tonnes)
Head Fitting
To Suit Wire
Sheave Dia.
Weight (kg)
Gunnebo
Size (in.)
Part No.
(mm)
05 - HARDWARE
164444 500 1 1/8-1 1/4 30 Swivel Shackle SB30S20BS 155
Other sizes and capacities available.
Weight (kg)
To suit Shaft
Size (mm)
Size (mm)
121525 11 6.12
160033 3 10-12
165030 15 8.16
160034 4 12-22
Other sizes available.
Other sizes available.
Fitted with industrial thrust bearing to Lynch Pin: Unit of Measure - Each
rotate under load and seals.
Compact design for easy handling.
Eye Size (mm)
ORDER CODE
WLL (tonnes)
ORDER CODE
Weight (kg)
Pin Diameter
(mm)
164132 16 88 15.8
165046 4.5
164133 18 105 16
165135 6
Other sizes available.
165136 8
165251 11
Other sizes available.
WWW.BULLIVANTS.COM 147