Professional Documents
Culture Documents
Note: It's normally good enough to just use the same value as the OSD Blanking
Resultant voltage after diode drop
R2 Current 0.0034843 A 3.48
R1 + R2 Power dissipation 0.0121405 W 12.14
mA
mW
)/(R_{{TermTV}} + R_{{TermConsole}}))
alue as the OSD Blanking ground resistor you removed if not using diode
mA
* For OSD Inline Resistor
mW
Instead of playing with resistor values on the "OSD RGB Mux Calculator" page, can come to this page and it will
tell you what External RGB resistor value will match the factory OSD Inline resistor
Existing Factory OSD In line Resistor 2400 Enter the factory OSD Res
External RGB Resistor (using diodes) 391.7 430
External RGB Resistor (using diodes - 75R in console) - PAL SNES 429.2 430
External RGB Resistor (no diodes) 315.7 330
External RGB Resistor (no diodes - 75R in console) - PAL SNES 353.2 360
Enter the factory OSD Resistor value here
* Based on 0.7Vp-p requirement and 0.7V drop on diode, 75R to ground in set, no termination in console
* Based on 0.7Vp-p requirement and 0.7V drop on diode, 75R to ground in set and console PAL SNES
* Based on 0.7Vp-p requirement, 75R to ground in set, no termination in console
* Based on 0.7Vp-p requirement, 75R to ground in set and console PAL SNES
0.7Vp-p In-line resistor to use on External RGB
With Diodes on OSD Lines No Diodes on OSD Line
OSD In-Line Resistor Calculated Next Standard Size Up Calculated
620 46 47 26
680 57 62 36
750 71 75 47
820 84 91 58
910 102 110 73
1,000 119 120 88
1,100 139 150 104
1,200 158 160 120
1,300 178 180 137
1,500 217 220 169
1,600 236 240 185
1,800 275 300 218
2,000 314 330 251
2,200 353 360 283
2,400 392 430 316
2,700 450 470 365
3,000 508 510 413
3,300 567 620 462
3,600 625 680 511
3,900 683 750 560
4,300 761 820 625
4,700 839 910 690
5,100 917 1,000 755
5,600 1,014 1,100 837
6,200 1,131 1,200 934
6,800 1,247 1,300 1,032
7,500 1,383 1,500 1,146
8,200 1,519 1,600 1,260
9,100 1,694 1,800 1,406
10,000 1,869 2,000 1,553
* Assuming 0.7Vp-p with 75R Termination, 0.7V drop from diodes if used, 5V RGB from Micom
on External RGB
No Diodes on OSD Line
Next Standard Size Up
27
36
47
62
75
91
110
120
150
180
200
220
270
300
330
390
430
470
560
560 Note: This image from Tim Worthington's SHMUPS post for 0.7Vp-p Jungles. T
680
750
820
910
1,000
1,100
1,200
1,300
1,500
1,600
* Assuming 0.5Vp-p with 51R Termination/24R externally as per Tim Worthington pattern 0.7V drop
from diodes if used, 5V RGB from Micom
on External RGB
No Diodes on OSD Line
Next Standard Size Up
18
27
33
43
51
62
75
91
100
120
130
150
180
200
220
270
300
330
360
390
430 Note: This image from Tim Worthington's SHMUPS post for 0.5Vp-p Jungles. T
510
560
620
680
750
820
910
1,000
1,100
uF 0.1
nF 100
pF 100000
uF 0.001
nF 1
pF 1000
uF 0.000470
nF 0.470
pF 470
R1 300
R2 100
Equivalent Resistance 75.00
Input Voltage 4.3
Inline Resistor 430
Ground Resistor 1200