Professional Documents
Culture Documents
: 140701
SUPPORT ITEMS
Ver. : 140701
Support Items Index
New,
Item Outline No.
Revised
Splicing tool A To make it easy and sure to splice 8mm paper tape. A-20
Joint tape Individual piece type joint tape. A-20-1
Splicing tool B To joint the tapes surely with special metal plate. A-21
Rubber support pin No change of location at the time of change over. C-2
Nozzle cleaning pallet & basket To support efficient nozzle cleaning. C-7
Block for paper & emboss tape (8mm ITF) To make it easy to handle and improve pick up quality C-16R
Emboss gauge Easy check pick up off set of odd shape component C-17
Rubber support pin for CM series, Type A No change of location at the time of change over. C-26-1
Rubber support pin for CM series, Type B Rubber support pin for dead space. C-26-2
Rubber support pin for CM series, Type C To set rubber support pin in original support plate C-26-3
Magnet block (Self feeding type feeder) To make it stable to pick up by magnet force C-29
Universal PCB support pin (Screen printer) Adjustable support pins to support more proper position. C-30
PCB support pin (Magnet type) Easy setting of support pins by magnet block. C-32
Nozzle cleaning tool To clean up nozzles thoroughly at a shorter time. C-34
Tape splicing jig (Handy type) Anyone can splice easy and certainly in short time. C-35 Revised
Special nozzle pack To handle many kinds of odd shape components. C-36 Revised
One touch support pin set (Screen printer) To reduce change over time by batch exchange. C-38
Floppy disk (FD) converter Alternative unit for floppy disk drive (FDD) C-39 Revised
Joint tape (in roll) To achieve low cost and resource saving. C-40 Revised
Dispenser (stainless steel) For joint tape (in roll), for anti-ESD C-40-1 Revised
BM series : Nozzle filter jig Make it easy to remove and install filter. C-42 New
Spring keeper for nozzle holder Prevent drop of spring on nozzle holder C-43 New
Cleaning paper (V20) Non-woven fabric wipe solder past well. C-44 New
Reel Box Support 8mm large reel C-46 New
Radial components splicing jig Support both of 12.7 and 15mm pitches C-47 New
Tray pallet for soft tray with flange Dedicated tray pallet for soft tray with flange C-48 New
Adapter for feeder inspection jig To inspect various type tape feeder with the inspection F-5
ji
L/R wring setting prevention plate Separate L side and R side on double tape feeder. F-6
Reel setting L/R check guide (8mm ITF) To prevent of wrong setting by easy visual checking. F-7
ITF Reel holder Combined reel with ITF, make it easy to handle F-10 New
【Remark】
Revised, New: Revised: revised leaflet since previous version.
New: Added leaflet newly.
Ver. : 140701
Ver.: 130701R
Features
■ The splicing tool cut the 8mm paper tape to V shape. The
shape after cut tape will make it easy to connect tape.
■ Tape splicing with special 8mm joint tape will make it
easy and sure.
Splicing Tool A
(For 8mm paper tape) Application
■Tape :8mm paper ( and or less than 3216size)
■ Tape feeder :
Parts Number: X00R5057000 Intelligent tape feeder
Tape feeder for tape splicing
Notes
1) The splicing tool A is available for 8mm paper tape only,
not available for emboss tape due to special cutting shape.
2) Recommend to use special joint tape
・Joint tape with joint detection
Parts No. N510049652AA
Applicable Machines
Modular Placement Machine Series
with tape feeder for tape splicing.
No. A-20
Notice The contents of this document are subject to change without prior notification.
Features
■Cost down types with reliability same as previous type.
■Metal plate which is needed with previous type joint
tape is unnecessary.
Application
■Applicable tape width and type:
Joint tape 8mm paper / emboss, 12mm emboss
Part No.
■Joint tape without joint detection (Blue)
① For 8mm paper / emboss (1,000pcs / set)
Part No. N510049651AA
Parts Number:
Please refer right side
(e.g.)
Applicable Machines
Modular Placement Machine Series
with tape feeder for tape splicing.
Remark
1) Joint tape and support tape are consumable.
2) Black color joint tape with joint detection and support
tape are antistatic materials.
No. A-20-1
Notice The contents of this document are subject to change without prior notification.
Features
■ Splicing tool B will joint the tapes surely with special metal
plate and joint tape.
Application
■ Taping Specifications:8~72mmemboss,8mm paper
■ Tape feeder:
Splicing Tool B Intelligent tape feeders
8mm single tape feeder (endless)
8mm double tape feeder (endless)
12~72mm motor driven tape feeder
Remarks
Parts Number: 1089696451 ■ 1 set of splicing tool B includes follows
Clamping tool: 1pc , Part Number: 1089696451
(Joint tape do not include)
■ Metal plate and joint tape are necessary to splice tape.
1) Metal plate (2,000pcs/ pack)
Part number: 108969805804
2.) Joint tape without joint detection (Blue color)
① S size:for 8mm tape (1,000pcs / pack)
Part number: 1089696420
② M size:12 to 16mm tape (1,000pcs/ pack)
Part number: 1089696430
③ L size:24 to 44mm tape (1,000pcs / pack)
Part number: 1089696440
3.) Joint tape with joint detection (Black Color)
① For 8mm tape, paper/ emboss (1,000pcs / pack)
Part number: N986FC8Q-S84
②For 12mm tape (1,000pcs / pack)
Part Number: N986FC12-S85
③For 16mm tape (1,000pcs / pack)
Part Number: N986FC16-S86
④For 24 to 72mmtape (1,000pcs / pack)
Splicing tool B is a Necessary item Part Number: N986FC24-S87
machine running.
This cart improves the workability of tape splicing.
* Splicing cart does not include clamping tool.
Applicable Machines
Modular Placement Machines
with tape feeders for tape splicing
Note
■ Not all tape feeders are available for tape splicing.
No. A-21
Notice The contents of this document are subject to change without prior notification.
©Panasonic Factory Solutions Co., Ltd. 2011,2013
Ver. : 130701R
Features
■ Rubber support pins will support the PCB gently.
■ Two types (Long, Short type) are available.
■ The material is conductive type rubber with carbon.
System
■ Rubber support pins will bend and support the back of PCB,
Rubber Support Pin even if the PCB has the components on the back side.
Set
pin O-ring Base plate 3mm
S et pi n
Support pin (Short)
(for base plate)
Notes
■ Rubber support pins are consumable parts.
■ Refer attached table for applicable machine.
Rubber support pins will support ■ The components height on the back side of PCB is Max.
5mm.
the PCB gently. ■ Long type rubber support pins set on the XY table directly.
It’s not necessary to change the (Some of machines are not available)
■ Short support pins need base plate and connection pins to set
location of support pins. on the XY table of machine.
■ For screen printer, any rubber support pins are not available.
Attention
■ Some of PCBs might not be suitable to support the back by
rubber support pins.
■ When PCB thickness is less than 1mm, the rubber support
pins might warp the PCB.
No. C-2-1
Notice The contents of this document are subject to change without prior notification.
©Panasonic Factory Solutions Co., Ltd. 2011,2013
Ver. : 130701R
HT
MPAG3 N210109684AA N210109685AA
1998121054 32mm
MPAG3B ※4 ※4
MPAV
MPAV2
BM
1998121096 199812105502
Series
MCF
MCF2
MC111
MC211
N210109478AA
MPA3 40.2mm
※4
N210109479AA
MSF 52mm
※4
N.A.
MPAG1 N.A. N210109480AA
71mm
MPAG2 ※4
N210109477AA
MMCG3 33mm
※4
※1: Min. 4pcs of connection pins need for one pc of base plate.
Number and location of support pins depends on the PCB size and design.
※2: Set pin need O-ring to fix it. (For 1pc of set pin needs 1pc of O-ring.)
O-ring is common part for connection pin listed on the above table. Part number :N554C03700A
※3: When the pitch of XY table is 2.5mm (hounds tooth), use set pin for 2.5mm. Rubber support pin (long type) is not
available for the 2.5mm pitch XY table.
※4: The length of set pin was changed. Do not use together previous
type set pins. New designed set pins have line to distinguish it Line to distinguish
from previous type. Set pins of previous type are also available,
place order with previous parts number.
※5: For 0603 chip placement, when long type support pins are used, place order with parts number 1998121473.
Notice The contents of this document are subject to change without prior notification.
Features
Nozzle Cleaning ■ Support to clean up various kinds nozzles efficiently.
■ Two type of pallet are ready by the diameter of nozzle. Use
suitable pallet with basket.
Cleaning Basket
Cleaning
Pallet
C-7
Notice The contents of this document are subject to change without prior notification.
Purpose
■ Make it easy to handle and improvement of pick up
Features
emboss reels ■ Compatible for paper and emboss reels.
Block replacement is not necessary, when change
reel type (Paper/ Emboss).
C-16R
Notice The contents of this document are subject to change without prior notification.
Attracted
No
Paper Not attracted
Yes −
Attracted
No
Emboss Not attracted
Yes −
∗1 This indicates whether magnetic forces adversely affect the characteristics of chips.
∗2 This indicates whether chips are attracted to the magnets.
The magnetic flux density on the surface of magnets used is 50 mT or less.
Block Suitable tape dim. Effects (∗3 Effectiveness depends on the type
Tape reel dimensions
Type Dim. A Dim. B of tapes and chips.)
Work tape Sending hole Vertical oscillation is reduced because this block is
highly effective in making the tape closely contact the
(1) ~ 4.6 mm ~ 1.2 mm
presser cover ∗3. Chips that are attracted to the
magnets become stable in position.
Definitions of tape dim.
This block provides a larger area for supporting the
tapes and this reduces vertical oscillation. Moreover,
(3) ~ 3.2 mm ~ 1.3 mm
thin and soft tapes may be prevented from derailing
from the tape guide.∗3
3.2 ~ 1.2 ~
Tape guide dim. on feeder (4) Vertical oscillation of tapes is reduced.∗3
4.6 mm 1.3 mm
Precautions for installing the block for paper and emboss types
OK NG
Ver. : 130701
Features
■ Compact size : 91 x 54mm
■Applicable emboss tape : 12mm ~ 72mm
■ Easy measurement by 2mm yellow matrix lines.
■ Scale of mm and inch support measurement on site.
Emboss Gauge
Applicable Tape
Emboss tape (12mm~72mm)
No. C-17
Notice The contents of this document are subject to change without prior notification.
©Panasonic Factory Solutions Co., Ltd. 2011,2013
Ver. : 130701R
Features
■ Rubber support pins will support the PCB gently.
■ Conductive type rubber with carbon.
Rubber Support Pin System
for CM Series ■ Rubber support pins will bend and support the back of
PCB, even if the PCB has the components on the back side.
Type A (Remark)
The photo on the left side is example.
The location of pins should be adjusted with the PCB.
Notes
■ Rubber support pin and base plate are common for CM
modular and CM88C/S.
■ Minimum 4 pcs of connection pins need for one base plate.
■ The quantities depend on the PCB size and specifications.
■ The rubber support pins are consumable parts.
■ The components height on the back side of PCB is Max.
Base plate 5mm.
Attention
Some of PCBs are not suitable to support the back by
the rubber support pins.
Bolt &
When PCB thickness is less than 1mm, the rubber
washer support pins might warp the PCB
The length of set pin was changed. Do not use
together previous type set pins. New designed set
Connection pin Rubber pin pins have line to distinguish it form previous type.
for base plate (Short) Set pins of previous type are also available, place
order with previous parts number.
Applicable Machines
CM Modular, CM88C/S
No. C-26-1
Notice The contents of this document are subject to change without prior notification.
Features
■ Rubber support pins will support the PCB gently.
■ Conductive type rubber with carbon.
Rubber Support Pin ■ The support pins for dead space will support the dead
space near by fixed rail.
Notes
■ Minimum 2pcs of connection pins need for one base plate.
Connection Pin ■ The rubber support pins are consumable parts.
Base Plate ■ The components height on the back side of PCB is Max.
for Base Plate
5mm.
■ The potion and around of PCB sensor is not available to set
the any support pins.
Attention
Some of PCBs are not suitable to support the back by
the rubber support pins.
When PCB thickness is less than 1mm, the rubber
support pins might warp the PCB
The length of set pin was changed. Do not use
together previous type set pins. New designed set
pins have line to distinguish it form previous type.
Set pins of previous type are also available, place
order with previous parts number.
Rubber support pins will support
the PCB gently.
Line to distinguish
It’s not necessary to change the
location of support pins
Applicable Machines
CM Modular
No. C-26-2
Notice The contents of this document are subject to change without prior notification.
Features
■ Rubber support pins will support the PCB gently.
■ The rubber support pins Type C are able to set in the
Rubber Support Pin original support plate of CM series machines.
■ Conductive type rubber with carbon.
for CM Series
Type C System
■ Rubber support pins will bend and support the back of
PCB, even if the PCB has the components on the back side.
Notes
■ The rubber support pin must connect with connection pin.
■ The quantities depend on the PCB size and specifications.
■ The rubber support pins are consumable parts.
■ The components height on the back side of PCB is Max.
5mm.
Rubber support pin ■ The connection pin has 2pcs of O-ring.
(Short type)
Attention
Some of PCBs are not suitable to support the back by
the rubber support pins.
When PCB thickness is less than 1mm, the rubber
support pins might warp the PCB
The length of set pin was changed. Do not use
together previous type set pins. New designed set
pins have line to distinguish it form previous type.
Set pins of previous type are also available, place
order with previous parts number.
O-ring Connection pin
Applicable Machines
CM Modular, CM88C/S
No. C-26-3
Notice The contents of this document are subject to change without prior notification.
Features
■ Easy to set on existing tape feeders by 2pcs of screw
Magnet Block
bolt.
■ 2 type of block are ready by tape size. S and L size.
Attention
■ The effect by the magnet block depends on the
Part Number: magnetic character of component.
N610044963AB (S size) ■ The adverse effect by magnetic force should be
N610044964AB (L size) confirmed by the customer beforehand.
(Magnetic-flux density: Max. 65 mT)
■ Select L or S size block by the taping size.
(Refer following cross section)
2.5
L size
1
S size
3.5
1.4
Magnet block
No. C-29
Notice The contents of this document are subject to change without prior notification.
©Panasonic Factory Solutions Co., Ltd. 2012,2013
Ver. : 130701R
Purpose
■The adjustable support part makes it possible to support
the proper position.
Universal PCB Support Pin Features
■The support part is adjustable to the PCB. Adjustment of
Parts Number ■Universal PCB support pin only put on previous PCB
N610057748AA support pin unit (matrix plate) .
Special PCB support block is unnecessary.
Specifications
■Universal PCB support pin have to be used with PCB
support pin unit (matrix plate) . (It’s not able to use
without pin unit.)
■Pin pitch is 10mm.
41mm
A
Applicable Machines
No. C-30
Notice The contents of this document are subject to change without prior notification.
Purpose
To improve operating efficency and avoide removal of
support pins.
Procedure
1) Firmly insert a support pin to a hole of the plate.
2) When inserted, confirm that the lower surface of the pin
Part Number: N610133066AA touches bottom.
3) Ensure that the magnet is in contact with the plate and that
the attraction force is acting.
Ensure the magnet in
contact with the plate and
the acting attraction force.
Remarks
1) This support pin cannot be inserted to adjacent holes of the
support plate (see Fig. 2).
2) Please avoid attaching it to a hole adjacent to a fixing
screw for the support plate as doing so
10
【Previous type】 【Magnet type】 2
Avoid
Support pin surrounding
area of the
Magnet
Support pin φ8 0.66
Outer Shape 8.66
O ring of the Shield Case
Fig. 2 Fig. 3
No. C-32
Notice; The contents of this document are subject to change without prior notification.
Purpose
To clean up nozzle thoroughly at a shorter time.
Features
Nozzle Cleaning Tool 1) Easy and effective nozzle cleaning by water and air.
(Nozzle cleaning tool can be used as a air blower.)
2) Short cleaning time
・Cleaning (Water + Air) : about 10s /pc
・Dry process (Air blow) : about 5s/pc Total : about 15s
Procedure
Part Number: N510061701AA 1) Pour purified water into the water tank. Fix the water tank to
cleaning tool.
2) Blow water and air to edge of nozzle tip to clean.
Construction (About 5s to 10s)
Select valve
Select "Water + Air" or
"Air blow"
Lever 3) Change select valve to air blow, blow off the moisture inside
Amount of blow can be nozzle by air blow. (Air blowing position)
Adjusted by the grip Air blowing position
Air connector
Connector ready for
coupler and tube.
Nozzle reflector
Water tank
Nozzle tip
Remarks
1) The above mentioned cleaning time is estimation. The
cleaning effect depends on the contamination of nozzle.
【Cleaning sample (225CS nozzle)】 2) Use purified water only to clean up.
(Before) (After) Never use alcohol or solvent.
3) Prepare cover and receiver when cleaning up the nozzle to
prevent mist splashed around.
4) When clean up nozzles, be careful not to bump the cleaning
tool against nozzles. Otherwise the nozzles may be
5) We are able to provide cleaning pins as follows.
Use cleaning pins with cleaning toll.
No. C-34
Notice; The contents of this document are subject to change without prior notification.
Dedicated Cutter
Procedure
1) Set the tapes on jig 2) Cut the tapes at one time
No. C-35
Notice; The contents of this document are subject to change without prior notification.
©Panasonic Factory Solutions Co., Ltd. 2012-2014
Ver. 131225R
Purpose
Separate type nozzle in order to handle many kinds of odd
shape components.
Features
Special Nozzle Pack 1) Separate type nozzle, suitable nozzle can be assembled for the
odd shape components.
2) 5 types nozzle pack by head type and nozzle shape
Nozzle Kinds of Components
Head Type Part No.
shape Nozzle (more than)
For 3/2 N610145751AA Oval 1 11 207 kinds
nozzle N610145752AA Oval 2 11 232 kinds
Part No. : head N610145753AA Round, Pad 15 160 kinds
Refer the table on right side. For 8 nozzle N610145754AA Oval 1 11 11 kinds
head N610145755AA Round, Pad 11 21 kinds
Special Nozzle pack 59 kinds of nozzle cover over than 631 kinds of components.*1
* For the nozzle shape, please refer attachments.
Configuration
Nozzle Bolt
Nozzle
【For 3/2 nozzle head】 【For 8 nozzle head】 2) Fix the nozzle with bolt.
Applicable model :
NPM series
*2
Remarks
CM series modular placement machine 1) *1:The number of components' kinds are researched by
PFSC. (As of Dec. 2011)
2) *2: The models after CM402
(CM402,401,400,212,232,602,101,DT401,400)
No. C-36
Notice; The contents of this document are subject to change without prior notification.
©Panasonic Factory Solutions Co., Ltd. 2012, 2013
2/6
Attachment 1: Pack part number: N610145751AA
Nozzle No A01 Typical component Nozzle No A02 Typical component Nozzle No A03 Typical component Nozzle No A04 Typical component
Part No. N210165881AA Part No. N210165882AA Part No. N210165883A Part No. N210165884AA
Material Stainless steel Connector Material Stainless steel Connector Material Stainless steel Connector Material Stainless steel Connector
Max. component weight 0.07g Max. component weight 0.1g Max. component weight 0.32g Max. component weight 0.12g
Ref.
(On
e
piec Ref. (One piece Ref. (One piece Ref. (One piece
e type nozzle) type nozzle) type nozzle)
type
nozzl
Nozzle No A05 Typical component Nozzle No A06 Typical component Nozzle No A07 Typical component Nozzle No A08 Typical component
Part No. N210165885AA Part No. N210165886AA Part No. N210164718AA Part No. N210164719AA
Material Stainless steel Connector Material Stainless steel Connector Material Plastics Connector Material Plastics Connector
Max. component weight 0.13g Max. component weight 0.28g Max. component weight 0.27g Max. component weight 0.47g
Ref. (One piece Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No. Nozzle No.
1272 1273 1192 1672
Part No. Part No. Part No. Part No.
KXFX04YKA00 KXFX04YMA00 KXFX04U6A00 KXFX05NVA00
Height Height Height Height
22.5㎜ *A 22.5㎜ *A 22.5㎜ *A 22.5㎜ *A
Nozzle No A09 Typical component Nozzle No A10 Typical component Nozzle No A11 Typical component
Part No. N210164720AA Part No. N210164721AA Part No. N210164722AA
Material Plastics Connector Material Plastics Connector Material Plastics Connector
Max. component weight 0.68g Max. component weight 1.12g Max. component weight 0.41g
Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No.
1128 1249 2405
Part No. Part No. Part No.
KXFX04QAA00 KXFX04XAA00 KXFX05BVA00
Height Height Height
22.5㎜ *A 22.5㎜ *A 22.5㎜ *A
*A: The nozzle height is different fro the height (27.5mm) of special nozzle pack.
3/6
Attachment 2: Pack part number: N610145752AA
Nozzle No A12 Typical component Nozzle No A13 Typical component Nozzle No A14 Typical component Nozzle No A15 Typical component
Part No. N210164723AA Part No. N210164724AA Part No. N210164725AA Part No. N210164726AA
Material Plastics Connector Material Plastics Connector Material Plastics Connector Material Plastics Connector
Max. component weight 1.93g Max. component weight 2.7g Max. component weight 0.6g Max. component weight 2.88g
Ref.
(On
e
piec Ref. (One piece Ref. (One piece Ref. (One piece
e type nozzle) type nozzle) type nozzle)
type
nozzl
Nozzle No A16 Typical component Nozzle No A17 Typical component Nozzle No A18 Typical component Nozzle No A19 Typical component
Part No. N210164727AA Part No. N210164728AA Part No. N210164729AA Part No. N210164730AA
Material Plastics Connector Material Plastics Connector Material Plastics Connector Material Plastics Connector
Max. component weight 1.33g Max. component weight 0.99g Max. component weight 2.73g Max. component weight 3.82g
Ref. (One piece Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No. Nozzle No.
1468 1404 2418 2437
Part No. Part No. Part No. Part No.
KXFX05A4A00 KXFX0558A00 KXFX05CMA00 KXFX05CMA00
Height Height Height Height
22.5㎜ *A 22.5㎜ *A 22.5㎜ *A 22.5㎜ *A
Nozzle No A20 Typical component Nozzle No A21 Typical component Nozzle No A22 Typical component
Part No. N210164731AA Part No. N210164732AA Part No. N210164733AA
Material Plastics Connector Material Plastics Connector Material Plastics Connector
Max. component weight 2.4g Max. component weight 7.46g Max. component weight 2.68g
Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No.
1421 2472 2408
Part No. Part No. Part No.
KXFX056AA00 KXFX05FFA00 KXFX05C1A00
Height Height Height
22.5㎜ *A 22.5㎜ *A 22.5㎜ *A
*A: The nozzle height is different fro the height (27.5mm) of special nozzle pack.
4/6
Attachment 3: Pack part number: N610145753AA
Nozzle No C01 Typical component Nozzle No C02 Typical component Nozzle No C03 Typical component Nozzle No C04 Typical component
Part No. N210164734AA Part No. N210164735AA Part No. N210164736AA Part No. N210164737AA
Material Plastics Connector Material Plastics Connector Material Plastics Connector Material Plastics Connector
Max. component weight 0.02g Max. component weight 0.05g Max. component weight 0.19g Max. component weight 0.19g
Ref.
(On
e
Ref. (One piece Ref. (One piece Ref. (One piece
piec
type nozzle) type nozzle) type nozzle)
e
type
Nozzle No C05 Typical component Nozzle No C06 Typical component Nozzle No C07 Typical component Nozzle No E01 Typical component
Part No. N210164738AA Part No. N210164739AA Part No. N210164740AA Part No. N610139631AA
Material Plastics Connector Material Plastics Connector Material Plastics Connector Material Rubber Connector
Max. component weight 0.67g Max. component weight 0.77g Max. component weight 0.77g Max. component weight 4.57g
Ref. (One piece Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No. Nozzle No.
1532 1479 1003 1476
Part No. Part No. Part No. Part No.
KXFX05H7A00 KXFX05ASA00 KXFX037UA00 KXFX05ALA00
Height Height Height Height
22.5㎜ *A 22.5㎜ *A 22.5㎜ *A 22.5㎜ *A
Nozzle No E02 Typical component Nozzle No E03 Typical component Nozzle No E04 Typical component Nozzle No E05 Typical component
Part No. N610139632AA Part No. N610139633AA Part No. N610139634AA Part No. N610139635AA
Material Rubber Connector Material Rubber Connector Material Rubber Connector Material Rubber Connector
Max. component weight 4.47g Max. component weight 8.95g Max. component weight 13.4g Max. component weight 13.1g
Ref. (One piece Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No. Nozzle No.
1424 1427 2421 1403
Part No. Part No. Part No. Part No.
KXFX056PA00 KXFX0570A00 KXFX05CTA00 KXFX0556A00
Height Height Height Height
22.5㎜ *A 22.5㎜ *A 22.5㎜ *A 22.5㎜ *A
Nozzle No E06 Typical component Nozzle No E07 Typical component Nozzle No G01 Typical component
Part No. N610139636AA Part No. N610139637AA Part No. N210164748AA
Material Rubber Connector Material Rubber Connector Material Stainless steel Connector
Max. component weight 23.4g Max. component weight 36.6g Max. component weight 0.94g
Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No.
1004 1005 1604
Part No. Part No. Part No.
KXFX037VA00 KXFX037WA00 KXFX05L9A00
Height Height Height
22.5㎜ *A 22.5㎜ *A 22.5㎜ *A
*A: The nozzle height is different fro the height (27.5mm) of special nozzle pack.
5/6
Attachment 4: Pack part number: N610145754AA
Nozzle No K01 Typical component Nozzle No K02 Typical component Nozzle No K03 Typical component Nozzle No K04 Typical component
Part No. N210166851AA Part No. N210166852AA Part No. N210166853AA Part No. N210166854AA
Material Stainless steel Connector Material Stainless steel Connector Material Stainless steel Connector Material Stainless steel Connector
Max. component weight 0.04g Max. component weight 0.09g Max. component weight 0.19g Max. component weight 0.07g
Ref.
(On
e
piec Ref. (One piece Ref. (One piece Ref. (One piece
e type nozzle) type nozzle) type nozzle)
type
nozzl
Nozzle No K05 Typical component Nozzle No K06 Typical component Nozzle No K07 Typical component Nozzle No K08 Typical component
Part No. N210166855AA Part No. N210166856AA Part No. N210166857AA Part No. N210166858AA
Material Stainless steel Connector Material Plastics Connector Material Plastics Connector Material Plastics Connector
Max. component weight 0.44g Max. component weight 0.1g Max. component weight 0.31g Max. component weight 0.62g
Ref. (One piece Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No. Nozzle No.
459 105 193 122A
Part No. Part No. Part No. Part No.
N610004745AA N610004634AA N610059650AA N610126031AA
Height Height Height Height
13.8mm 13.8mm 13.8mm 13.8mm
Nozzle No K09 Typical component Nozzle No K10 Typical component Nozzle No K11 Typical component
Part No. N210166859AA Part No. N210166860AA Part No. N210166861AA
Material Plastics Connector Material Plastics Connector Material Plastics Connector
Max. component weight 0.26g Max. component weight 0.69g Max. component weight 1.56g
Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No.
137 108 126
Part No. Part No. Part No.
N610012277AA N610004578AA N610004665AA
Height Height Height
13.8mm 13.8mm 13.8mm
6/6
Attachment 5: Pack part number: N610145755AA
Nozzle No M01 Typical component Nozzle No M02 Typical component Nozzle No M03 Typical component Nozzle No M04 Typical component
Part No. N210166862AA Part No. N210166863AA Part No. N210166864A Part No. N210166865AA
Material Plastics Connector Material Plastics Connector Material Plastics Connector Material Plastics Connector
Max. component weight 0.04g Max. component weight 0.13g Max. component weight 0.13g Max. component weight 0.11g
Ref.
(On
e
piec Ref. (One piece Ref. (One piece Ref. (One piece
e type nozzle) type nozzle) type nozzle)
type
nozzl
Nozzle No M05 Typical component Nozzle No M06 Typical component Nozzle No M07 Typical component Nozzle No M08 Typical component
Part No. N210166866AA Part No. N210166867AA Part No. N210166868AA Part No. N210166869AA
Material Plastics LED Material Plastics LED Material Plastics COIL Material Plastics LED
Max. component weight 0.78g Max. component weight 0.9g Max. component weight 0.37g Max. component weight 0.84g
Ref. (One piece Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No. Nozzle No.
105A 147 129 153S
Part No. Part No. Part No. Part No.
N610118531AA N610018388AA N610004667AA N610069427AB
Height Height Height Height
13.8mm 13.8mm 13.8mm 13.8mm
Nozzle No M09 Typical component Nozzle No P01 Typical component Nozzle No P02 Typical component
Part No. N210166870AA Part No. N610141621AA Part No. N610141622AA
Material Plastics LED Material Rubber LED Material Rubber LED
Max. component weight 1.5g Max. component weight 6.4g Max. component weight 14.4g
Ref. (One piece Ref. (One piece Ref. (One piece
type nozzle) type nozzle) type nozzle)
Nozzle No. Nozzle No. Nozzle No.
184 140 450
Part No. Part No. Part No.
N610056813AB KXFX0386A00 KXFX0387A00
Height Height Height
13.8mm 13.8mm 13.8mm
Ver. 130701R
Purpose
Improve operation at the time of change over by
batch exchange of support pins/
Arrange support pins according to sample PCB. One-touch support set plate
One-touch support base unit
Parts number
1) One-touch support pin set (M size) *1
・One-touch support set plate (M size): N610130690AA
・One-touch support base unit (M size): N610130692AA
2) One-touch support pin set (L size) *1
Set the set plate with support Completed the setting ・One-touch support set plate (L seize): N610134072AA
pins on screen printer ・One-touch support base unit (L size): N610134053AA
3) One-touch support pin (10pcs/ pack): N610136517AA
4) Support plate for one-touch support pin set *2
・Fro SP18P-L N610155067AA
・For SP60P/80V-MU N610131458AA
Applicable machine: ・For SP60P/80V-L N610145936AA
・For SP28P-DH N610144526AA
Screen printer
For SP60P/80V-MU
Remarks
SP70, SP18, SPD, SP60/80, SP28 1) *1: One-touch support pin set does not include any
one-touch support pin.
SPG Please order one-touch support pins.
2) *2: In case of SP18P, SP60/80, SP28, use dedicated support
plate for one-touch support pin set in stead of standard plate.
This dedicated support plate needs for each screen printer
when use one-touch support pin set.
No. C-38
Notice; The contents of this document are subject to change without prior notification.
Kit depends on model of screen printer and PCB size. Please refer following table.
When use at SP18P, SP60/80, SP28, additionally needs support plate for one-touch support pin set.
Purpose
Alternative unit for discontinued floppy disk drive (FDD).
Features
Floppy Disk (FD) 1) Modification except replacement FDD to FD converter is
unnecessary. *1、2
Converter
2) Use SD card in stead of Floppy Disk (FD).
3) A single SD card is able to hold data of up to a maximum
100 of FD. *3
4) SD card offers improved storability and durability.
5) Utility software (included with FD converter as a standard
SD card
FD PC SD card 1) Format the SD card by utility software(*5) before use on
(Customer) FD converter.
【画面イメージ】 2) SD card meet following specification can be used.
(1) Micro SD standard, SDHC standard (recommend)
(2) Capable of use in the SPI mode.
*For the confirmed SD card, please refer attached sheet.
Remarks
1) *1: When replace 26 pins connecter FDD to FD converter,
the board set is required separately.
(For the details, please refer attached sheet.)
2) *2:Some of machines are required to change the setting
of jumper switch.
3) *3:When using an SD card of 256MB or more, FD
No. C-39
Notice; The contents of this document are subject to change without prior notification.
©Panasonic Factory Solutions Co., Ltd. 2012,2013
Appendix 1 : Floppy Disk (FD) adapter
Ver. 140312R
■Confirmed SD card
Manufactture Model Capacity Remarks
Panasonic RP-SD04GJ1K 4GB SDHC
RMSD-BS02GSA 2GB MicroSD *1
BUFFALO
RMSD-BS04GSA 4GB MicroSD *1
SF-2B4 2GB SD
SONY
SF-4B4 4GB SDHC
SDSDH-002G-J95 2GB UltraSD
SanDISK
SDSDB-2048-J95A 2GB SD
*1: Attach the included microSD-SD conversion adapter.
■Media selector
When select media selector switches on the front panel, can be seleted up to 100 FDs on one piece of SD card
Note) Make sure that the indicator LED is off before changing the media selector switch positions.
■Jumper switches
The jumper switches at the back ok the FD converter are used to configure the FDD settings.
Note) Set the jumper switch positions properly according to the setting of the FDD to be replaced.
PC board
Signal cable Signal cable side
Pin #1
Table 2: Jumper switch settings for applicable models (Refer to "Applicable Models in Attachment1.)
Function
SW1 Sets the drive select signal (Sets DS0.)
* Short: DS0 used * Open: DS0 not used <Factroty setting>
SW2 Sets the drive select signal (Sets DS1.)
* Short: DS1 used <Factroty setting> * Open: DS1 not used
SW3 Selects DISK CHANGE or READY
(Sets the pin #34 of the FD interface connector.)
* Short: READY * Open: DISK CHANGE <Factroty setting>
SW4 Reserved (Not used)
SW5 Reserved (Not used)
2/6
Appendix 2: Floppy disk (FD) explorer Ver. 140312R
■Outline
Floppy disk (FD) explorer (hereunder, FD explorer) is option software which make it possible to read and write RMX format data
on Windows PC. Normally, Windows system is not able to read RMX format floppy disk (FD). When use FD explorer, reading and
writing on Windows is possible.
FD explorer support FAT (MS-DOS) format which is able to read and write on Windows. FD explorer recognize data format
automatic, so format and other setting is not required.
FD explorer retry to read FD when fail to read FD once automatic. Please approve that some of FD data might not be able
to read even if retry to read.
■FDD
Follows are USB type FDD which are verified.
Reading RMX format data
Supplier Model
2HD 2DD
NEC PC-VP-WU14 OK OK
Logitec LFD-31UE OK OK
BUFFALO FD-USB(MPF82E) OK OK
IO・DATA USB-FDX1A OK N/A
NEC PC-VP-BU21 OK N/A
YE・DATA YD-8U10 OK N/A
Logitec LFD-31UEF N/A N/A
TEAC FD-30USB N/A N/A
Imation D353FUE N/A N/A
*The above all model are able to read FAT(MS-DOS) format FD.
■USB tag
When use FD explorer, attached USB tag is necessary for authentication.
When use FD explorer on several PC, several authentic USB tag is required for each.
■Part No.
・One license pack, Part No. : N510069083AA, Model: SS-FDE-IRMX-11 (FD explorer (CD-ROM): 1 set, Authentic USB tag : 1set)
・USB tag (for additional), Part No. : N510068873AA, Model : SS-FDE-IRMX-01 (Authentic USB tag : 1set)
One licence pack USB tag (for additional) USB tag (for additional) (Total)
1set of one license pack
+ 2 sets of USB tag (for additional)
3/6
Attachment 1:
Table 2. Applicable models (Not yet verified by machines) as of 2014/02/21 Setting of jumper SW *6
* For the applicable model (not yet verified by machines) also, verification are doing time by time.
For the latest information, please contact us.
(*1)Key SD (Part No.: N610156425AA) is necessary to change pass word for engineers.
(*2) When the model of FDD is EME-219PA(black), the board set (Part No.: 39932S0003/ in case of 1set of FDD)
or board set (Part No.: 39932S0004/ in case of 2 sets of FDD) is necessary additionally
(*3)MV2F have 2 sets of FDD, the jumper setting is same as for both of them.
(*6) Jumper setting depends on model of machine. For the setting, please refer table 1~5.
4/6
Attachment 1:
Table 4. Applicable models (Not yet verified by machines) as of 2014/02/21 Setting of jumper SW *6
Category Controller Model SW1 SW2 SW3 SW4 SW5
M, SP11P-MA, BD20S-M ● ●
* For the applicable model (not yet verified by machines) also, verification are doing time by time.
For the latest information, please contact us.
5/6
Attachment 1:
(*4)Key SD (Parts No. : N610162842AA) is necessary to change pass word for engineers.
(*5)Please approve that data saving time might be about double the time of FDD.
(*6) Jumper setting depends on model of machine. For the setting, please refer table 1~5.
(*7) Height of FD converter is 25.4mm.
6/6
Ver. 140526
Purpose
Achieve low cost and resource saving with joint tape in roll.
Features
Joint tape
1) Bases and films used in conventional joint tape are no longer
required. It also saves you from separating bases and films
to recycle them.
(in roll) 2) Just cut the tape to a constant length by the dispenser and
affix it to the components tapes to be spliced. Splicing can
be done easily with less man-hour.
*1
Easy steps to splice
Parts Number: Refer to follows.
Remarks
1) Use the dedicated dispenser and jigs to ensure proper splicing.
2) Affix the joint tape surly with proper procedure.
For the details, please refer attached instruction with joint tape.
3) To splice emboss tapes, crimping or pocket overlapping is
required.
Applicable tape width:
8~72mm
Crimping Pocket overlapping
4) The dispenser do not include any joint tape.
Purchase the joint tape separately.
5) For dispenser (stainles steel), please refer another leaflet.
No. C-40
Notice; The contents of this document are subject to change without prior notification.
©Panasonic Factory Solutions Co., Ltd. 2013, 2014
Ver. 150526
Features
1) The dispenser for joint tape (in roll) is made of stainless steel.
Use this dispenser (stainless steel), when the countermeasure
against electrostatic discharge (ESD) is required.
Dispenser (stainless 2) Dispense the fixed length (40mm)of joint tape, there is no
different length of tape by operator. *1
steal) for joint tape 3) Use dedicated base (stainless steel) to install on the splicing jig
cart easily.
(in roll) *1: Error (approx.±3mm) of the length might occur by the usage
condition.
The length of dispensing joint tape is fixed.
Part No. : N510069432AA
Specifications
■ Dispenser (stainless steel), Part No. : N510069432AA
・Dimension: W 80 x D 225 X H 122 mm ・Mass : approx. 1.4 kg
【Example of installation】
②
1) Not include any screws and wires to install.
2) When install the dispenser on splicing jig cart, following items
are necessary.
①Hexagon socket head cap screw, M5x10L : 4pcs
(Part No. : N510017386AA)
②Pan head screw, M3x8L : 3pcs
(Part No. : N510018061AA)
■ Caster and rod for unit electrostatic discharge (ESD)
Modification parts for splicing jig cart
①Rod, Part No. :N210075540AA
①
②Caster, Part No. :N510002490AA
*Replace the standard casters.
②
【Ref. Information】
Splicing jig cart (Part No. :KXF03XTA00)
*Not include follows, Splicing jig (Part No. : 108969451),
Splicing jig (handy type) (Part No. : N610166398AA),
Applicable item : Bracket (Part No. : N210172928AA).
Joint tape (in roll)
Part No. : N510066511AA Notice
1) Dispenser (stainless steel) does not include any joint tape.
No. C-40-1
Notice; The contents of this document are subject to change without prior notification.
Ver. 131101
Purpose
Makes it easy and stable to remove and install nozzle pad
Features
Nozzle filter Removing 1) When remove pad, no damage by the screw part of jig
2) When install pad and filter, concave shape part of jig keep
pad stably.
Part No.: N610140596AA 3) The jig support to reduce the time of removing. The skill is
not necessary for the job.
Specification
■ Size : approx. φ13 x 75 mm
Procedure
Removing
① ② ③
Installing
① ② ③
④
①Set nozzle pad on the jig (opposite side of screw part),
put filter on the pad.
②Push up pusher of nozzle holder.
③Insert nozzle pad and filter into the nozzle holder slowly.
(until to the end)
Applicable model : ④remove the jig from holder.
⑤Release the pusher of nozzle holder.
BM123, 133 Remarks
BM221, 231 When remove and install nozzle pad and filter, please be
careful not to drop off parts enough.
No. C-42
Notice; The contents of this document are subject to change without prior notification.
Purpose
Spring keeper prevent drop off spring when remove and
Spring Keeper for install nozzle holder.
Feature
Spring
How to use
① ②
16 nozzle
cleaning side Stopper
③ ④
Nozzle holder shaft cleaning tool ① After remove all nozzles, catch nozzle holder with 12
Part No. :N610130890AB nozzle cleaning side of tool. Push up the tool and turn it
counter clock -wise to unlock the nozzle holder.
② Slide the spring keeper up to cover the nozzle holder
Applicable Head : before remove the nozzle holder.
(NPM series) ③ Remove the nozzle holder slowly and keep spring with
the nozzle holder in spring keeper.
・12 nozzle head ④ Slide the spring keeper to take out the spring with nozzle
・8 nozzle head
Remarks
(CM series) 1) Use spring keeper after assemble on nozzle holder tool.
2) Spring keeper is unable to use it by itself only.
・High speed head (12 nozzle) 3) Spring keeper is applicable on nozzle holder tool (Part No.
(LS8 nozzle)
No. C-43
Notice; The contents of this document are subject to change without prior notification.
Features
1) The material is non-woven fabric which wipe solder paste well
with less shaggy. Applicable for solder paste (particle size : 20
μm).
Cleaning paper (V20) 【Cleaning example】
x 20 times
Part No. :
Please refer following table. x 200 times
【Applicable model, Part No., Specification】
Applicable Standard V20
Width
Model Part No. Part No.
SP28P 350mm KXF061FAA00 N510068901AA
SP60P/80V 480mm N510006703AA N510068902AA
SP70 530mm KXFP6HGVA00 N510068903AA
350mm N510025738AA N510068904AA *The fiber keep solder paste firmly.
SP18, SPD,
370mm N510057156AA N510068906AA
SPG
540mm N510025737AA N510068905AA
360mm N998TS50-019 N510068907AA 2) Both of 「top」 and 「bottom」 side are eve form. Both side are
SPP, SPF 410mm N998TS50-022 N510068908AA available for cleaning.
710mm N998TS50-021 N510068909AA ※Due to the used condition, bottom side might not be applicable for
cleaning.
【Top】 【Bottom】
Our scope
【Comparison of specifications】
Standard V20
Model TS100 TS507 KM/PM
PP 100%
Material Cotton 100% (Hydrophilic non-
woven fabric)
Applicable model : Weight (g/㎡) 100 51.5 42
Thickness (mm) 0.41 0.2 0.2
SP28P, SP60P/80V, Ultimate tensile Vertical 172.89 95.77 85
strength(N) Horizontal 31.86 17.63 24
SP70, SP18, SPD, SPG Frictional charge (KV) 0.21 0.22 less than 0.2
SPP, SPF
(Notice)
Cleaning performance might not be same as standard cleaning
paper, due to PCB, stencil, aperture shape and size, printing and
cleaning conditions, etc. So, please evaluate well before use for
mass production.
No. C-44
Notice; The contents of this document are subject to change without prior notification.
Before
1pc of large reel can be set on feeder cart for 1 pc
of ITF 8mm double.
Small reel
Max. φ180mm
Large reel
Max. φ330mm
X 10 times
X 5 times
φ180 Φ330
No. C-46
Notice; The contents of this document are subject to change without prior notification.
Purpose
Support easy and reliable splicing of radial components.
Features
New radial components Support both of 12.7 and 15mm pitches
splicing jig
Pitch 12.7mm
Pitch 15mm
【Positioning pins】
Position components tape.
【Slit】
Insert scissors to cut
送り穴ピッチ:12.7/15mmの両方に対応 component tape.
【Opening】
【Hole】 Spece to turn splicing tape to
On the side of pitch 12.7mm. the back side of component
tapes.
スプライシングテープ(ラベル)
対応機種: 専用のスプライシングテープ(ラベル)をお使いください。
ラジアル部品挿入機
品番:X01L01101
(1,000枚/ロール)
No. C-47
おことわり 本資料の内容は予告なく変更する場合がありますので、予めご了承ください。
©Panasonic Factory Solutions Co., Ltd. 2014
Ver. 140515
Purpose
Due to reduced defoemation od soft tray, realize more stable
pick up.
Tray pallet for soft tray with
Features
flange (w. flat spring) 1) Press more wider side part of tray.
Support to reduce pick up miss rate.
2) Modification kits from standard tray pallet are ready.
(Fixed guide) Part No. : MTKA000167AA
(Adj. guide) Part No. : MTKA000165AA
3) Make it easy to set and remove soft tray with flange.
Part No. : MTKA000170AA Just slide tha tray when set and remove on tray pallet.
Fixed guide
Adj. guide
After
Tray pallet for soft tray with flange.
Press wider side part of tray.
Slide to
set &
Remarks
Applicable machines : 1) For the details of tray specification, please refer standard
specications of NPM series.
NPM series 2) The size of flange should be as follows.
(Width) 4mm or above,
(Thickness) 1mm or less.
No. C-48
Notice; The contents of this document are subject to change without prior notification
Features
■The adapter enables to inspect various type of tape feeder with
inspection jig for self-feeding tape feeder.
■ It’s easy to exchange the adapter to change the type of tape
Adapter for Feeder feeder.
■ The scale of 25um display on the monitor.
Adapter Clamp
● For MSR/HT
N610021821AA
Adapter base
Adapter clamp
● for MV(K)-LL
N610021907AA
● For MV(Q)
N610045682AA
Adapter Base
No. F-5
Notice The contents of this document are subject to change without prior notification.
©Panasonic Factory Solutions Co., Ltd. 2011,2013
Ver. : 130701R
Features
■ The plate will separate L side and R side to prevent the
wrong setting on double tape feeder.
■ It easy to set on existing self-feeding tape feeder.
10896BF001,002
10896BF061,062,063,066
10896BF101,102,103,106
10896BF121,122,123,126 など
No. F-6
Notice The contents of this document are subject to change without prior notification.
Check Guide ■ The guides are able to set to the 8mm double
intelligent tape feeder by 2pcs of bottle easily.
Notes
■ Sales unit: 10pcs/pack. (Include set bolt: 20pcs)
■ Especially when use it with compact type feeder cart,
the reel position have to follow the instruction on the
above table. e.g.) Proper reel setting:
Easy to check the Supported side reel by the
wrong reel position check guide set on the
setting lower position reel holder.
No. F-7
Notice The contents of this document are subject to change without prior notification.
©Panasonic Factory Solutions Co., Ltd. 2012,2013
Ver. 140225
Purpose
Combine 8mm small reel with intelligent tape feeder (ITF)
Features
Intelligent Tape Feeder 1) Easy set up
Set up reel holder on ITF with attached bolts (3pcs) easily.
(ITF)
2) Easy change over
Combined reel with ITF make it easy to handle it.
Part No.:
3) Easy component verification
R Spec. :MTNK000008AA When component run out, empty reel remain in the reel
holder on ITF. When supply new reel, remained reel
L Spec. :MTNK000009AA help to verify component.
Specifications
1) 2 types of reel holder (R spec. and L spec.) are ready
by the combination of reel setting position.
Please select type by your factory operation rule.
Before After
Remarks
1) When store ITFs with reel holder on tape feeder stand
(Part No. : KXFX037PA00), layout of shelf plate have
Applicable intelligent to be changed.
8mm double 2) Reel setting L/R check guide (Part No. : N610048961AB,
N610048963AB) can not be set on ITF with reel holder.
No. F-10
Notice; The contents of this document are subject to change without prior notification
Inquiries…