Professional Documents
Culture Documents
State of Sabah
- SR/1 -
Ibu Pejabat JKR
DISEMBER 2011 Kota Kinabalu
- SR/2 -
Isi Kandungan
Table of Content
Bil. Huraian Mukasurat
1 Piling SR/5-11
2 Excavator SR/12-13
3 Concretor SR/14-16
4 Bricklayer SR/17
5 Drainlayer SR/18-20
6 Roofer SR/21
8 Ironmongery SR/25-26
11 Plumber SR/3341
12 Glazier SR/42
13 Painter SR/43
15 Electrical SR/49-131
16 Mechanical SR/132-145
17 Dayworks SR/146-147
- SR/3 -
Negeri Sabah, Malaysia
State of Sabah, Malaysia
1. This Schedule of Rates shall form part of the Contract for : ………………………………………...……..……..
……..………..…………………….…...…..…………...….........................
…........................................................................……………………...………….. and shall be read in
conjunction with the General Specifications and any addendum or appendices hereto.
2. The tenderer shall insert in the space provided against each item the percentage increase or
decrease for Dayworks Rate which he requires to be applied to the rates in this Schedule.
3. The percentages increase or decrease inserted by the tenderer for Dayworks rate shall be
rationalised to reflect the current market prices and shall be subject to the agreement with the
S.O. as to their reasonableness and subject to such agreement, shall be used as a Schedule of
Rates for calculating the cost of any variation which may be ordered in accordance with the
term of the contract.
4. This Schedule of Rates duly filled in (or amended) and signed must be returned together with
the Tender Form.
5. All rates herein shall held to include for waste on materials, carriage and cartage, carrying in
and return of empties, hoisting, setting, fitting and fixing in position, making and all other
labours and everything else necessary (including any customs duty, etc.) for the proper
completion of each item and for establishment charges and profit.
6. Rates for excavation (including excavation for drainage) are to include for keeping all
excavations free from water, mud, etc. by pumping or bailing if required and for planking and
strutting, levelling, ramming or preparing bottoms, any double handling required and for
additional excavation for planking and strutting and formwork.
7. Rates for concrete shall be held to include for forming, leaving or cutting grooves, chases,
mortices, holes and making good and any sundry items of a like nature.
8. Rates for formwork shall be held to include for erection, raking and circular cutting, splayed
edges, notchings, allowance for overlaps and passing at angles, battens, strutting, bolting,
wedging, easing, striking and removal.
9. Rates for brickwork and blockwork shall be held to include for all rough and fair cutting, over-
sailing and receding courses, rough relieving and discharging arches, wedging and pinning,
raking out joints for and pointing flashings, bedding plates, bedding and pointing frames,
parging and coring flues, labour caves filling, plumbing angles, forming square and rebated
reveals, cut squints or bird-mouths, notches, forming, leaving or cutting chases, holes and
mortices and cutting and pinning and making good any other sundry items of a like nature.
10. Rates for each item of paving shall be held to include for all rounded angles, arises and
making good and any other sundry items of a like nature.
11. Rates for each item of skirtings, risers, channels and the like shall be held to include for all
- SR/4 -
short lengths, formed, cut and purpose made angles, junctions, ends, etc. and making good
and any other sundry items of a like nature.
12. Rates for all carpentry timber are to include for all labour to notchings, halvings, morticing,
tensioning and wedging, scarfing, dovetailing, sinking for heads of bolts and nuts and
trimming for openings.
13. Rates for each item of joinery shall be held to include for all cuttings, notchings, holes housing
ends, mitring ends and shaped ends, angles, junctions, heading joints, short lengths and any
other sundry items of a like nature.
14. Rates for plastering, rendering, etc. shall include for raking out joints of brickwork, blockwork
and masonry or hacking concrete as key.
15. Overall rates of each item of plastering, etc. shall be held to include for narrow widths and
small quantities, temporary rules, joints between different types of plastering, internal angles,
arises, rounded coves and external angles not exceeding 1" radius, and mitres, stopes etc. on
cornices, mouldings, enrichments, coves, skirtings, gutters and strings, all making good and
any other sundry items of a like nature.
16. Rates for mild steel tubing are to include all short running lengths, sockets, backnuts, elbows
and bends.
17. Rates for driving of pressure-treated timber piles shall include for the provision of all necessary
mechanical plant, rig, temporary works, timber, etc. transporting to site, erecting, dismantling
removal on completion and also for travelling of pile frame about the site.
18. Rates for driving of precast concrete piles and reinforced concrete extension piles shall include
for travelling of pile frame about the site.
19. 20. Provide always, the use of this Schedule of Rates shall be limited to variations which
are minor in nature. For extensive and sizeable variations involving large quantities, the S.O.
shall review the relevant rates contained herein before issuing the variation order and
reasonable reduction in the rates shall be agreed between the Contractor and the S.O.
20. Abbreviations :-
nr = Number
m = Metre
m2 = Metre Square
m3 = Metre Cube
kg = Kilogram
pr = Pair
N.A. = Not Applicable
- SR/5 -
TAMBAHAN PERATUSAN
Kadar-kadar harga yang terkandung di dalam Jadual Kadar Harga ini adalah berasakan
kepada nilai kerja semasa di Daerah Kota Kinabalu. Tambahan peratusan bagi Daerah-
Daerah lain di Sabah dan lokasi-lokasi projek berkanan dari pusat bandar/pekan
pembekal bahan-bahan kerja berkenan adalah seperti Jadual berikut:-
BANDAR/PEKAN KUMPULAN
A B C D
Kurang Dari 10-20 km 20-30 km Lebih dari 30
10km km
TAMBAHAN PERATUSAN (%)
Kota Kinabalu 0 2 4 6
Penampang 0 2 4 6
Tuaran 5 7 9 11
Papar 5 7 9 11
Ranau 10 12 14 16
Kota Belud 10 12 14 16
Kudat 15 17 19 21
Kota Marudu 15 17 19 21
Pitas 15 17 19 21
Sandakan 15 17 19 21
Beluran 15 17 19 21
Kinabatangan 18 20 22 24
Tongod 18 20 22 24
Keningau 10 12 14 16
Tenom 15 17 19 21
Tambunan 12 14 16 18
Beaufort 12 14 16 18
Sipitang 12 14 16 18
Kuala Penyu 12 14 16 18
Tawau 15 17 19 21
Lahad Datu 15 17 19 21
Semporna 15 17 19 21
Kunak 15 17 19 21
Kawasan-kawasan yang tidak boleh dihubungi melalui jalan raya (JKR Standard Road)
atau kawasan melebihi 80km dari mana-mana pusat bandar/pecan, peratus
pertambahan akan dinilai berasingan.
- SR/6 -
PILING
7 Mild steel welded extension sleeve or collar size 5mm thick, 120mm x
120mm (internal dimensions) x 450mm long with a seating fillet
welded centrally inside and bevelling ends of piles and slipping same
into and nailing. nr 25.00
9 Cut off and remove surplus length 125mm x 125mm timber piles
including treating head and 150mm length of cut off end of pile with
preservative and an approved bituminous compound before encasing
in pile cap. nr 3.00
PILING (CONT’D)
- SR/5-
No. Item Description Unit Rate
(RM)
PILING (CONT’D)
- SR/8 -
PRECAST CONCRETE PILES (CONT’D)
62 Ditto and test a successive test pile test ditto. Per KN 11.00
64 Ditto and test a successive test pile test ditto. Per KN 9.00
66 Ditto and test a successive test pile test ditto. Per KN 8.00
68 Ditto and test a successive test pile test ditto. Per KN 8.00
PILING (CONT’D)
- SR/9 -
all extra costs before commencement of the main piling works.
Per KN 11.00
70 Ditto and test a successive test pile test ditto. Per KN 8.00
72 Ditto and test a successive test pile test ditto. Per KN 8.00
PILING (CONT’D)
- SR/10 -
95 Ditto 9.00m long. m 188.00
100 Supply only 450mm diameter extension pile 6.00m long. m 220.00
103 Supply only 600mm diameter initial/head pile 6.00m long. m 280.00
106 Supply only 600mm diameter extension pile 6.00m long. m 275.00
109 Handle, transport, pitch and drive 250mm diameter pile. m 50.00
115 12.70mm (overall) Butt weld connection 0.8m girth between edges of
mild steel extension head and base cap plates including coated heavily
with bituminous compound. nr 50.00
PILING (CONT’D)
121 Cut off 250mm diameter precast concrete spun pile to the required
level and roughen the inner surface to detail. nr 50.00
- SR/11 -
122 Ditto 300mm diameter ditto. nr 65.00
127 Supply and install 12mm diameter high yield steel reinforcement in
pile head to detail. kg 4.30
129 Provide and weld 6mm thick mild steel plates to detail for 250mm
diameter piles. nr 55.00
135 Supply, place and compact grade 30/20 concrete in pile hollow section
as specified. m3 450.00
137 Ditto and test a successive test pile test ditto. Per KN 9.00
138 Ditto pile size 300mm diameter to a vertical load test of ….. KN
including all extra costs before commencement of the main piling
works. Per KN 17.00
139 Ditto and test a successive test pile test ditto. Per KN 9.00
140 Ditto size 350mm diameter to a vertical load test of ….. KN including
all extra costs before commencement of the main piling works.
Per KN 18.00
141 Ditto and test a successive test pile test ditto. Per KN 9.00
PILING (CONT’D)
142 Ditto size 400mm diameter to a vertical load test of ….. KN including
all extra costs before commencement of the main piling works.
Per KN 21.00
143 Ditto and test a successive test pile test ditto. Per KN 11.00
- SR/12 -
144 Ditto size 450mm diameter to a vertical load test of ….. KN including
all extra costs before commencement of the main piling works.
Per KN 11.00
145 Ditto and test a successive test pile test ditto. Per KN 8.00
146 Ditto size 600mm diameter to a vertical load test of ….. KN including
all extra costs before commencement of the main piling works.
Per KN 11.00
147 Ditto and test a successive test pile test ditto. Per KN 8.00
EXCAVATOR
1 Cut down and clear away from site, tress exceeding 300mm
and not exceeding 600mm girth at 1.00m above ground
level including grubbing up roots and filling up holes with
approved earth. nr 169.60
- SR/13 -
ditto.
9 Ditto exceeding 1.50m & not exceeding 3.00m deep ditto m3 30.60
(ditto).
10 Ditto exceeding 3.00m & not exceeding 4.50m deep ditto m3 43.80
(ditto).
EXCAVATOR (CONT’D)
Notes :
1.0 Item 6 and 7 – If it comes to the knowledge of the S.O. that the Contractor is selling the surplus excavated
material, then the Contractor is not entitled to any payment in respect of this item.
2.0 In the measurement of quantities of earth either carting away or filling, the S.O. shall ensure that these are
compacted or consolidated quantity. For guidance, the following are the average increases in bulk of various
types of ground after excavation.
- SR/14 -
Type Percent
Gravel 10
Sand 12 1/2
Ordinary Earth 25
Clay 33 1/3
Chalk 33 1/3
Rock 50
CONCRETOR
- SR/15 -
etc.
CONCRETOR (CONT’D)
- SR/16 -
b) 12mm Diameter. kg 4.30
18
Ditto 100mm x 200mm mesh weighing 4.53kg/ms ditto (MS- m2 20.00
B385/B7).
19 Ditto 100mm x 200mm mesh weighing 5.93kg/ms ditto (MS- m2 25.50
B503/B8).
32 To soffit of suspended floor slab, roof slab, landing slab etc. m2 55.00
34
Extra over for strutting to soffits exceeding 3.60m high for
m2 5.00
every 600mm stages.
CONCRETOR (CONTD)
- SR/17 -
No. Item Description Unit Rate
(RM)
37
12mm Bitumen impregnated fibreboard 150mm wide as
m 20.00
expansion joint filler in reinforced concrete structure including
filling 10mm x 10mm recess with non shrinkable mastic
grouting.
- SR/18 -
BRICKLAYER
6 Half brickwall built honey-comb in cement mortar (1:6) with 113mm m2 22.00
spaces as specified.
7 Half brickwall built entirely of facing bricks in gauged mortar (1:6) m2 95.00
stuck weather pointing as specified.
17 90mm Thick precast cement and sand hollow blocks in cement mortar m2 48.00
(1:6) as specified.
19 114mm Thick precast cement and sand hollow blocks in cement m2 58.00
mortar (1:6) as specified.
21 190mm Thick precast cement and sand hollow blocks in cement m2 93.00
mortar (1:6) as specified.
- SR/19 -
DRAINLAYER
1 Excavate trench for 100mm diameter drains and bed 400mm wide not
exceeding 1.50m deep and average 900mm deep and back filling
trench including removing surplus soil and deposit and spread and
level on site as specified. m 7.00
2 Ditto exceeding 1.50m deep but not exceeding 3.00m deep and
average 1.80m deep ditto. m 16.00
3 Excavate trench for 150mm diameter drains and bed 450mm wide
not exceeding 1.50m deep and average 900mm deep ditto. m 8.00
4 Ditto exceeding 1.50m deep but not exceeding 3.00m deep and m 17.00
average 1.80m deep ditto.
6 Ditto 500mm wide under 150mm diameter drain pipe and ditto. m 22.00
7 Ditto under 100mm diameter drain pipe and completely surround as m 31.00
specified.
11 100mm Diameter vitrified clay pipe laid and jointed with flexible rubber m 37.00
ring as specified.
14 150mm Diameter vitrified clay half round straight channel and jointing
in cement and sand (1:3). m 47.00
17 100mm Diameter vitrified clay half round straight channel and jointing
in cement and sand (1:3). m 18.00
19 150mm Diameter vitrified clay half round straight channel and jointing m 22.00
in cement and sand (1:3).
21 225mm Diameter vitrified clay pipe half round straight channel and
jointing in cement and sand (1:3). m 27.00
- SR/20 -
DRAINLAYER (CONT’D)
25 150mm diameter vitrified clay half round straight channel and jointing
in cement and sand (1:3). m 123.00
27 100mm Diameter salt glazed drains (1 Quality) laid and jointed with m 14.00
tarred gaskin and cement and sand (1:3).
31 150mm Diameter salt glazed stoneware half round straight channel m 18.00
and jointing in cement and sand (1:3).
33 100mm Diameter UPVC Class ''C'' pipes laid and jointed with solvent nr 20.00
weld as specified and in accordance with manufacturer's
instructions.
35 100mm Diameter UPVC Class ''C'' pipes laid and jointed with solvent
weld as specified and in accordance with manufacturer's instructions. m 44.00
37 19mm Diameter mild steel rod 750mm girth bent as required and nr 7.00
with ends split caulked and built into brickwork as step iron.
38 610mm x 457mm Coated cast iron light duty single seal flat type
manhole cover and frame to BS.497 in grade ''C'' weighing 25.45kg
including setting frame in cement and sand (1:3) as specified and nr 100.00
sealing cover with grease.
40 762mm x 462mm ditto medium duty ditto grade ''B'' weighing nr 950.00
234.00kg ditto.
41 588mm Diameter coated cast iron heavy duty single flat type manhole nr 1,050.00
cover and frame to BS.497 in grade ''A'' weighing 245/00kg including
setting frame in cement and sand (1:3) as specified and sealing cover
with grease.
- SR/21 -
DRAINLAYER (CONT’D)
43 100mm Diameter unglazed clayware subsoil drain pipe with open m 9.00
joints.
44 150mm Diameter ditto. m 10.00
- SR/22 -
ROOFER
8 Hip or ridge to match interlocking clay roof tiles (standard colour). m 71.00
11 Colorbond hip or ridge to match metal roof sheet (standard colour). m 30.00
19 Approved ceramic roofing tiles laid on and including timber battens as m2 89.00
specified.
- SR/23 -
22 Approved steel roof truss system complete with high tensile
galvanised steel roof truss, come with plates, self drilling fastener, m2 66.00
metal angle plates anchored with expansion bolt and steel battens
spaced to suit roofing profile in accordance with the manufacturer's
instructions
1 Frames to doors, windows vent including fixing (S.G. 1 & S.G. 2 m3 2,500.00
(Group ''A'') timber).
2 Floor joists, roof trusses, rafters, ceiling joists and partitions including m3 2,300.00
fixing (Sawn S.G. 1 & S.G. 2 (Group ''A'') timber).
3 Floor joists, roof trusses, rafters, ceiling joists partitions and ramps m3 1,300.00
including fixing (Sawn S.G. 3 & S.G. 4 (Group ''B'') timber).
4 38mm Thick framed, ledged and braced doors and windows m2 140.00
including fixing but excluding ironmongery (measeured overall).
5 38mm Thick panelled doors and casement windows, open and rebated
for glass or other infill (measured separately) including fixing but m2 140.00
excluding ironmongery (ditto).
6 51mm Thick louvred doors and windows including ditto (ditto). m2 150.00
7 38mm Thick skeleton framed flush door covered both sides with 6mm m2 80.00
thick plywood including ditto (ditto).
12 28mm Thick approved PVC flush door overall size 750mm x 2100mm nr 130.00
including fixing but excluding ironmongery.
13 38mm Thick approved PVC flush door overall size 875mm x 2100mm nr 190.00
ditto.
20 Moulded skirtings, architrave, picture rail AND CORNICES IN S.G 5 & m3 4,000.00
S.G. 6 (Group ''C'') timber including fixing.
- SR/24 -
21 Staircase component in S.G. 1 & S.G. 2 (Group ''A'') timber including m3 3,000.00
fixing.
22 13mm Thick soft board in ceilig fixed complete including V-jointed and m2 33.00
cutting.
26 9mm Thick chipboard in ceiling fixed complete butt or V-jointed and m2 19.00
cutting.
35 6mm Thick fibre cement board in partition including fixing but m2 22.00
excluding framing.
38 9mm Thick approved gypsum board in partition including fixing but m2 26.00
excluding framing.
43 12mm Thick mineral fibre board ceiling, exposed lay in grid and
complete with metal framing as specified (simple pattern). m2 68.00
- SR/25 -
suspension and joint edge and complete with ditto (ditto). m2 110.00
50
48 50mm
13mmThick
ditto. resilient and flexible bounded fine glass fibre mat lining m2
m2 12.00
27.00
(density 10kg/m3) and fixing to wall as specified.
49 65mm x 65mm approved plasterglass plain cornice as specified. m 9.50
51 Layer of single sided reinforced aluminium foil insulation laid to
slope with with 150mm laps (measered nett-no allowance made for m2 7.00
for laps).
52 25mm Thick ''Rockwool'' mineral woolslab (NO.337) sandwiched
between timber framing (measured separately). m2 15.00
53 Galvanised chicken wire netting 50mm mesh, fixed with tying wire
to purlins including 150mm laps (measured nett-no allowance made m2 4.50
for laps).
- SR/26 -
IRONMONGERY
- SR/27 -
IRONMONGERY (CONT’D)
- SR/28 -
STEEL AND IRONWORKER
1 Rolled mild steel in roof trusses, braces, gusset plates, bearing plates
etc. including riveting, welding, bolting, hoisting and fixing.
kg 4.90
2 Rolled mild steel in angles, joist, channels, plates, etc. including cutting,
drilling, assembling, welding, riveting, bolting etc. kg 6.30
5 Design, supply, fabricate and deliver to site including fixing and hoisting
in position steelroof truss, rafters, chord, bearers, ties, struts, wall
plates, truss connecters, straps, bolts and nuts and other associated
works, materials and labour required for the complete installation of the
fabricated steel trusses to S.O.’s approval.
m2 120.00
6 Supply and fix the following mild steel bolts complete with nuts and
washers :-
16 Supply and fix 1.0mm thick natural anodised aluminium side hung
casement window complete with all necessary framing and accessories
(glass measured separately) and fixing, all as per instruction and to the
approval of the S.O. m2 225.00
- SR/29 -
STEEL AND IRONWORKER (CONT’D)
17 Supply and fix window grille comprising of 20mm x 20mm mild steel
hollow section framing infilled with 20mm x 3.2mm thick mild steel
plate set in rectangular design at 100mm m2 120.00
19 Supply and fix 1.0mm thick natural anodised aluminium two panel
sliding window complete with all necessary framing and accessories,
beading on top and bottom of frame (glass measured separately) and
fixing, all as per instruction and to the approval of the S.O. m2 180.00
20 Supply and fix 1.0mm thick natural anodised aluminium three panel
sliding door ditto. m2 230.00
21 Supply and install 3.00m x 2.40m mild steel collapsible door including
channels, tracks, guides, etc. and fixing, all as per instruction and to the nr 1,500.00
approval of the S.O.
22 To design, supply, deliver, & install “City Top” Light Roof System & Roof
covering for proprietary prefabricated Roof trusses in light Weight Sheet
including all necessary battens and material fabrication and fixing in
position, all fixing accessories items (except UPVC down pipe and 1
layer of insulation) for the complete UPVC down pipe and 1 layer of
insulation) for the complete installation of the standard truss system
with maximum truss span 13m and spacing 1.2 m:-
a) Concrete roof tile m2 144.00
b) Clay roof tile m2 144.00
c) Metal sheet roof tile profile m2 137.00
d) Metal sheet roof straight profile (deck type) m2 101.00
e) Asphalt Shingles roof m2 144.00
23 Supply only the following with “City Top” light weight product:-
- SR/30 -
STEEL AND IRONWORKER (CONT’D)
b) Metal sheet roof straight profile (Lysaght Spandek 0.47mm TCT m2 178.00
in improved clean colorbond XRW)
c) Concrete roof tile (For Design & supply TRUSS COMPONENT m2 119
ONLY)
25 To design , supply , deliver & Install “Bristeel” Light Roof System & Roof
covering for proprietary prefabricated Roof trusses in light Weight Sheet
including all necessary battens and material fabrication and fixing in
position, all fixing accessories items (except UPVC down pipe and 1
layer of insulation) for the complete installation of the standard truss
system with maximum truss span 13m and spacing 1.2m:-
26 Supply only the following from “Teck Guan” mild steel material:-
c) M.S Plate
1)4.0mmx4’x8’ kg 4.50
2)2.0mmx4’x8’ kg 4.50
3)3.0mmx4’x8’ kg 4.50
4)4.5mmx4’x8’ kg 4.50
5)6.0mmx4’x8’ kg 4.50
6)8.0mmx4’x8’ kg 4.50
7)9.0mmx4’x8’ kg 4.50
8)10.0mmx4’x8’ kg 4.50
9)12.0mmx4’x8’ kg 4.50
10)15.0mmx4’x8’ kg 4.50
11)18.0mmx4’x8’ kg 4.50
12)20.0mmx4’x8’ kg 4.50
13)25.0mmx4’x8’ kg 5.00
14)6.0mmx6’x20’ kg 4.50
15)1/2”x5’x20’ kg 4.50
16)3.0mmx5’x10’ kg 4.50
17)6.0mmx5’x20’ kg 4.50
- SR/31 -
STEEL AND IRONWORKER (CONT’D)
5)4”x4”x6.0mm kg 5.00
6)4”x6”x6.0mm kg 4.70
7)5/8”x5/8”x1.0mm kg 4.20
8)5/8”x5/8”x1.2mm kg 5.20
9)3/4”x3/4”x1.0mm kg 4.20
10)3/4”x3/4”x1.2mm kg 5.20
11)1”x1”x1.0mm kg 4.20
12)1”x1”x1.2mm kg 5.00
13)1”x2”x1.2mm kg 5.00
14)1”x2”x2.3mm kg 5.20
15)1½”x1½”1.6mm kg 5.20
16)1½”x1½”x2.3mm kg 5.20
17)2”x2”x1.6mm kg 5.20
18)2”x2”x2.3mm kg 5.00
- SR/32 -
PAVIOR, PLASTERER AND TILE FIXER
16.
2 32mm Thick ditto m2
00
20mm Thick ditto skirting 150mm high with rounded top
3 m 7.00
edge and coved at bottom
- SR/33 -
PAVIOR, PLASTERER AND TILE FIXER (CONT’D)
Precast terrazzo tile flooring including 16mm (1:3) mortar screed as 82.0
28 specified m2 0
55.0
33 275mm High riser for teak parquet flooring with rounded top edge m 0
110.0
34 550mm High ditto m 0
18.0
35 13mm x 75mm High timber skirting to match parquet flooring m 0
9.5
36 20mm Thick granolithic flooring as specified m2 0
Ditto skirting 100mm high with rounded top edge and coved at 3.5
37 bottom m 0
45.0
38 Vinyl tile flooring as specified including screed m2 0
8.0
39 100mm High vinyl skirting ditto m 0
35mm x 4mm Aluminium dividing strip fixed and cast in floor finish 12.0
40 as specified m2 0
16mm Thick cement mortar (1:6) with plasticiser plastering in two 13.0
41 coats as specified to walls m2 0
12.0
42 12mm ditto to soffit , beam etc. m2 0
20mm Thick cement and sand (1:3) plastering in two coats as 14.0
43 specified on walls m2 0
- SR/34 -
PLUMBER
18 150mm Half round PVC rainwater gutter including jointing and fixing
with brackets. m 45.10
21 50mm Diameter medium duty coated cast iron soil, waste and
ventilating pipe as specified. m 39.10
- SR/35 -
PLUMBER (CONTD)
24 75mm Diameter medium duty coated cast iron soil, waste and
ventilating pipe as specified. m 58.10
27 100mm Diameter medium duty coated cast iron soil, waste and
ventilating pipe as specified. m 71.60
30 150mm Diameter medium duty coated cast iron soil, waste and
ventilating pipe as specified. m 109.50
34 Approved High Density Polyethylene (HDPE) water tank with lid fixed
complete :-
PLUMBER (CONT’D)
- SR/36 -
Item Description Unit Rate
No. (RM)
PLUMBER (CONT’D)
- SR/37 -
b) 19mm ditto. m 19.80
PLUMBER (CONT’D)
- SR/38 -
h) 100mm ditto. nr 103.68
PLUMBER (CONT’D)
- SR/39 -
c) 50mm ditto. m 40.86
PLUMBER (CONT’D)
- SR/40 -
d) 75mm ditto. m 59.40
PLUMBER (CONT’D)
- SR/41 -
a) 150mm x 150mm Semi-recessed, white glazed vitreous
china toilet roll holder. nr 40.20
j) Ditto with two 13mm chromium plated taps, marked ‘hot’ and
‘cold’. nr 302.80
PLUMBER (CONT’D)
- SR/42 -
t) 100mm Diameter chromium plated shower rose and arm with
swivel joint complete with 13mm chrome plated stopcock. nr 86.60
13
4mm Thick obscured glass and glazing to wood or metal as specified m2 42.00
14
5mm ditto m2 47.00
15
4mm thick obscured glass louvre blade 150mm wide as specified m 9.00
16 5mm ditto m 10.00
17 5mm Thick grey sheet glass and glazing to wood or metal as specified m2 87.00
18 6mm ditto m2 88.00
19
5mm Thick grey sheet glass louvre blade 150mm wide as specified m 15.00
20
6mm ditto m 15.50
5mm Thick dark grey float glass and glazing to wood or metal as
21
specified m2 108.00
22
6mm ditto m2 110.00
23
5mm Thick dark grey float glass louvre blade 150mm wide as specified m 19.00
24
6mm ditto m 20.00
6mm Thick obscured wired glass and glazing to wood or metal as
25
specified m2 190.00
26
5mm Thick tinted glass and glazing to wood or metal as specified m2 64.00
27 6mm ditto m2 75.00
GLAZIER
- SR/43 -
PAINTER
1 Knot, prime, stop and paint one undercoat and two finishing coats of m2 9.00
enamel paint on woodwork.
5 Clean down,prime and paint one undercoat and two coats of emulsion m2 9.00
paint on wall and ceiling as specified.
6 Ditto one undercoat and two coats of weather resistant paint ditto. m2 10.00
7 Ditto one undercoat and two coats of gloss enamel paint on metal m2 9.50
surfaces generally as specified
9 Clean down,prime and paint one undercoat and two coats of gloss m 1.50
enamel paint pn metal surfaces exceeding 200mm girth
17 Prepare and apply two coats of acrylic co-polymer resin based paint m2 14.00
("Standard Matt" or equivalent) on wall and soffits
22 Prepare and supply two coats of flame retardant paint (up to 600
degrees ) on metal surfaces m2 19.00
- SR/44 -
ROAD, CULVERT, FENCING, TURFING AND ROADSIDE DRAINS
ROADWORK
Unbound Pavement
1 50mm thick sand spread, levelled and compacted to falls and cambers
with an 8-ton roller. m2 4.00
2 Supply, lay and compact 200mm Thick granular sub base as specified
ditto. (Within 10km from source) m2 20.00
3 Supply, lay and compact 250mm Thick crushed aggregate base course
as specified ditto. (within 10km from source) m2 26.25
5 Supply, lay and compact asphalt concrete binder course (ACBC) 50mm
Thick inclusive of tack coat as specified. (Within 10KM from source) m2 18.00
6 50mm Thick asphalt concrete wearing course (ACWC 20) Ditto. m2 18.30
7 Supply, lay and compact suitable earth material road shoulder average
450mm Thickness as specified. (Source within 10KM from site) m2 6.75
Road Furniture
8 Supply and lay road marking lines paint 100mm wide (white) as m2 40.00
specified.
Road Kerb
- SR/45 -
ROAD, CULVERT, FENCING, TURFING AND ROADSIDE DRAINS (CONT’D)
CULVERT
23 Head and Wing Walls for Single Cell R.C. Box Culvert as specified. nr 6,000.00
- SR/46 -
ROAD, CULVERT, FENCING, TURFING AND ROADSIDE DRAINS (CONT’D)
FENCING
40 Extra over last 4 items for chain link fencing 1.8m high having three
(3) strands of two ply barb wire (13 gauge with 4 pointed barb at
75mm) on top. m 15.00
- SR/47 -
Item Description Unit Rate
No. (RM)
FENCING (CONT’D)
42 Mild steel double leaf gate size 4.90m wide x 1.50m high overall, each
leaf comprising of 150mm wide frame constructed of 3mm thick mild
steel plate welded to and including 2 No. 25mm x 25mm x 3mm mild
steel hollow section closed at ends with 6mm thick mild steel plate, top
and bottom rails constructed of 2 No. 3mm thick mild steel plate welded
to and including 2 No 50mm x 25mm x 3mm thick mild steel hollow
section closed at ends with 6mm thick mild steel plate, infilled with
20mm x 20mm mild steel hollow section vertical members at 125mm
centres closed at ends with 6mm mild steel plate, with and including
mild steel bolt and sleeve, lock plate, butt hinges, welding and painting.
nr 3,500.00
43 Mild steel single leaf gate size 1.05m wide x 1.50m high ditto. nr 1,500.00
44 Mild steel sliding gate size 6.0m wide x 1.80m high, constructed of
100mm x 50mm mild steel hollow gate frame all around including
intermediate framing to be welded together to infilled with 25mm x
25mm mild steel hollow at 150mm centres, fixing all members
together, filling all welds smooth complete with sliding gate roller
track and painting with one coat metallic primer and three coat alkali
resin base paint or equivalent and approved and all necessary works
for proper completion. nr 5,000.00
TURFING
46 Close turfing on level surfaces and including 50mm bed of black earth
as specified. m2 6.00
47 Close turfing to banks on and including 50mm bed of black earth and
pegging, all as specified. m2 6.50
48 Turfing for playing fields including site preparation, 100mm thick river
sand, 100mm thick top soil, turfing with an average 50mm thick
earth bed, compaction, watering, weed control, mowing and top
dressing all as specified. m2 18.00
ROADSIDE DRAINS
- SR/48 -
Item Description Unit Rate
No. (RM)
GABION
57 Supply and lay 1.0m x 1.0m x 1.0m PVC coated wire mesh rock filled.
m3 200.00
KANDUNGAN
MUKA
BAB SYARAT-SYARAT
TAMBAHAN PERATUSAN
- SR/49 -
BAB JADUAL KADAR HARGA
2
BAHAGIAN I : A Wiring
B Wiring
C PVC/PVC Cable
D PVC Cable
E Lightning Protection System
F Earth Protection System
BAHAGIAN V A Bulbs
B Fluorescent
C Standard / General Equipment
D Downlight
E Components & Spare Parts equipment
F Fan, Fan’s Spare Parts
- SR/50 -
PART I – WIRING
NOTE: For white plate instead of metalclad, deduct RM5.00 to the Price below
No. Unit Rate
Item Description
(RM)
- SR/51 -
A Supply and install all materials according to JKR Standard
Specification on surface wiring in conduit or conceal using
PVC cable c/w galvanized steel conduit/trunking and related
accessories.
3 Lamp point c/w 2 nos 2 way & intermediate 10A SP metalclad nr 200.00
switch.
5 Lamp point c/w 2 nos 10A 2 way SP weather- proof metalclad nr 725.00
switch.
6 Lamp point c/w 10A SP and bulb holder batten type horizontal lath nr 140.00
or angled Bakelite switch.
7 Lamp point c/w 10A SP metalclad switch, ceiling rose and ½ m 3 nr 130.00
cores 24/0.20mm round pvc cable.
8 Lamp point c/w 2 nos 10A SP metalclad switch, 2 way ceiling rose nr 155.00
and 1/2m 3 cores 24/0.20mm round pvc cables.
9 Lamp point c/w 2 nos 2 way and intermediate 10A SP metalclad nr 200.00
switch, ceiling rose and 1/2m 3 cores 24/0.20mm round pvc cables.
PART I - WIRING
- SR/52 -
No. Item Description Unit Rate
(RM)
13 Wall mounted fan point c/w 10A SP metalclad switch and ceiling nr 136.00
rose.
14 Exaust fan point c/w 10A SP metalclad switch and ceiling rose (not nr 136.00
including making hole).
15 Ceiling fan point c/w 10A SP metalclad switch and 10A 3 way nr 136.00
connector.
16 Ceiling fan point c/w 10A SP metalclad switch, 10A 3 way connector nr 146.00
and hanger hook.
17 Ceiling fan point c/w 10A SP metalclad switch, 10A 3-way nr 156.00
connector, regulator board and hanger hook.
18 Ceiling fan point c/w 10A SP metalclad switch, 10A 3-way connector nr 146.00
and regulator board.
19 Socket outlet point c/w 13A metalclad switch socket outlet using
PVC cable:-
i) 2 x 2.5mm2 nr 210.00
20 Power point c/w 13A metalclad twin switch socket outlet. nr 260.00
21 Power point c/w 13A metalclad weather proof switch socket outlet. nr 380.00
- SR/53 -
PART I - WIRING
23 Power point c/w 15A metalclad switch socket outlet at floor level nr 230.00
c/w pedestal box.
24 Water heater point c/w 15A DP switch with pilot lamp and15A 3 nr 330.00
plate junction box.
25 Cooker Control Unit (CCU) point c/w 45A DP metalclad switch with nr 470.00
pilot lamp and 13A Switch Socket Outlet with pilot lamp.
29 A/C point up to 2HP using 2 x 4mm2 cable c/w DOL starter, 15A
socket outlet, 32A DP switch with pilot lamp and mounting board.
i. Not more than 15m from respective DB. nr 360.00
30 Isolator point c/w 20A SPN metalclad isolator using 2 x 4mm2 c/w nr 400.00
cable protector.
- SR/54 -
PART I - WIRING
31 Isolator point c/w 32A SPN metalclad isolator using 2 x 6mm2 c/w nr 460.00
cable protector.
32 Isolator point c/w 63A SPN metalclad isolator using 2 x 16mm2 c/w nr 750.00
cable protector.
33 Isolator point c/w 20A TPN metalclad isolator using 4 x 4mm2 c/w nr 520.00
cable protector.
34 Isolator point c/w 32A TPN metalclad isolator using 4 x 6mm2 c/w nr 615.00
cable protector.
35 Isolator point c/w 63A TPN metalclad isolator using 4 x 25mm2 c/w nr 1,140.00
cable protector.
36 Fused switch point c/w 32A SPN metalclad fused switch using 2 x nr 460.00
6mm2 c/w cable protector.
37 Fused switch point c/w 32A TPN metalclad fused switch using 4 x nr 615.00
6mm2 c/w cable protector.
39 Emergency controlled centre start & stop point c/w emergency nr 165.00
start-stop button.
42 Cat.5 computer point c/w RJ45 socket outlet (up to 100m). nr 480.00
- SR/55 -
PART I – WIRING
NOTE: For white plate instead of metalclad, deduct RM5.00 to the Price below
3 Lamp point c/w 2 nos 2 way & intermediate 10A SP metalclad nr 160.00
switch.
5 Lamp point c/w 2 nos 10A 2 way SP weather- proof metalclad nr 685.00
switch.
6 Lamp point c/w 10A SP and bulb holder batten type horizontal lath nr 100.00
or angled Bakelite switch.
7 Lamp point c/w 10A SP metalclad switch, ceiling rose and ½ m 3 nr 90.00
cores 24/0.20mm round pvc cable.
8 Lamp point c/w 2 nos 10A SP metalclad switch, 2 way ceiling rose nr 105.00
and 1/2m 3 cores 24/0.20mm round pvc cables.
9 Lamp point c/w 2 nos 2 way and intermediate 10A SP metalclad nr 160.00
switch, ceiling rose and 1/2m 3 cores 24/0.20mm round pvc cables.
- SR/56 -
PART I - WIRING
13 Wall mounted fan point c/w 10A SP metalclad switch and ceiling nr 96.00
rose.
14 Exaust fan point c/w 10A SP metalclad switch and ceiling rose (not nr 96.00
including making hole).
15 Ceiling fan point c/w 10A SP metalclad switch and 10A 3 way nr 96.00
connector.
16 Ceiling fan point c/w 10A SP metalclad switch, 10A 3 way connector nr 106.00
and hanger hook.
17 Ceiling fan point c/w 10A SP metalclad switch, 10A 3-way nr 116.00
connector, regulator board and hanger hook.
18 Ceiling fan point c/w 10A SP metalclad switch, 10A 3-way connector nr 106.00
and regulator board.
19 Socket outlet point c/w 13A metalclad switch socket outlet using
PVC cable:-
i. 2 x 2.5mm2 nr 160.00
20 Power point c/w 13A metalclad twin switch socket outlet. nr 195.00
21 Power point c/w 13A metalclad weather proof switch socket outlet. nr 340.00
- SR/57 -
PART I - WIRING
23 Power point c/w 15A metalclad switch socket outlet at floor level nr 175.00
c/w pedestal box.
24 Water heater point c/w 15A DP switch with pilot lamp and15A 3 nr 245.00
plate junction box.
25 Cooker Control Unit (CCU) point c/w 45A DP metalclad switch with nr 350.00
pilot lamp and 13A Switch Socket Outlet with pilot lamp.
29 A/C point up to 2HP using 2 x 4mm2 cable c/w DOL starter, 15A
socket outlet, 32A DP switch with pilot lamp and mounting board:-
- SR/58 -
PART I - WIRING
31 Isolator point c/w 32A SPN metalclad isolator using 2 x 6mm2 c/w nr 380.00
cable protector.
32 Isolator point c/w 63A SPN metalclad isolator using 2 x 16mm2 c/w nr 625.00
cable protector.
33 Isolator point c/w 20A TPN metalclad isolator using 4 x 4mm2 c/w nr 430.00
cable protector.
34 Isolator point c/w 32A TPN metalclad isolator using 4 x 6mm2 c/w nr 510.00
cable protector.
35 Isolator point c/w 63A TPN metalclad isolator using 4 x 25mm2 c/w nr 1,140.00
cable protector.
36 Fused switch point c/w 32A SPN metalclad fused switch using 2 x nr 380.00
6mm2 c/w cable protector.
37 Fused switch point c/w 32A TPN metalclad fused switch using 4 x nr 510.00
6mm2 c/w cable protector.
39 Emergency controlled centre start & stop point c/w emergency nr 180.00
start-stop button.
42 Cat.5 computer point c/w RJ45 socket outlet (up to 100m). nr 400.00
- SR/59 -
PART I - WIRING
PVC/PVC cable
- SR/60 -
PART I - WIRING
19 2.5mm2. m 5.00
- SR/61 -
PART I - WIRING
PVC cable:-
- SR/62 -
PART I - WIRING
1 Copper Tape 25mm x 3mm c/w copper tape saddle 25mm installed m 100.00
in between test connectors with test connectors.
2 High density air final copper rod 16mm diameter x 610mm (2’) c/w set 150.00
copper base plate.
3 High density air final copper rod 15mm diameter x 610mm (2’) c/w set 300.00
copper base plate.
4 High density air final copper rod 16mm diameter x 915mm (3’) c/w set 450.00
copper base plate.
5 Brass type test connector c/w 2” diameter PVC pipe from test set 345.00
connector to ground (soil).
ii) Steel or copper clip for 16mm (5/8”) diameter copper earth
electrode.
- SR/63 -
PART I - WIRING
1 Copper Tape 25mm x 3mm installed in between switch box and test m 100.00
Panel.
ii) Steel or copper clip for 16mm (5/8”) diameter copper earth
electrode.
- SR/64 -
PART II - SWITCHING APPARATUS, FUSES, CONTROLLING APPARATUS
1 60A/63A nr 1,056.00
2 100A nr 1,145.00
4 200A nr 1,626.00
5 300A nr 1,934.00
Fused-switch, TPN, 500 volt, metalclad box c/w HBC fuse switch
6 60A/63A nr 984.00
7 100A nr 1,033.00
9 200A nr 1,520.00
10 300A nr 1,724.00
11 20A nr 215.00
12 30A/32A nr 246.00
13 60A/63A nr 335.00
15 60A/63A nr 741.00
16 100A nr 950.00
- SR/65 -
PART II - SWITCHING APPARATUS, FUSES, CONTROLLING APPARATUS
Fused-switch, TPN, 500 volt, metalclad box c/w HBC fuse switch:-
18 60A/63A nr 763.00
19 100A nr 892.00
Fused-switch, SPN, 250 volt, fully insulated c/w HBC fuse switch:-
21 60A/63A nr 294.00
B Isolator:
1 20A nr 220.00
2 30A/32A nr 250.00
3 60A/63A nr 300.00
4 20A nr 300.00
5 30A/32A nr 420.00
6 60A/63A nr 530.00
7 100A/125A nr 800.00
- SR/66 -
PART II - SWITCHING APPARATUS, FUSES, CONTROLLING APPARATUS
1 Motor starter, DOL single phase up to 3HP with thermal overload nr 269.00
protection and indicator lamps.
2 Motor starter, DOL three phase up to 3HP with thermal overload nr 369.00
protection and indicator lamps.
3 Metalclad motor starter, star- delta three phase up to 10HP with nr 656.00
thermal overload protection and indicator lamps.
E Contactor:-
Supply and install including all interloping cable, screws, bolts, nuts,
washers and others
1 10A nr 150.00
2 20A nr 180.00
3 30A nr 240.00
4 60A nr 300.00
5 20A nr 240.00
6 30A nr 300.00
7 60A nr 360.00
8 100A nr 600.00
- SR/67 -
PART II - SWITCHING APPARATUS, FUSES, CONTROLLING APPARATUS
1 30A/32/A nr 54.00
2 60A/63/A nr 69.00
3 100A nr 89.00
1 30A/32A nr 26.00
2 60A/63A nr 28.00
3 100A nr 36.00
2 32A nr 13.00
3 63A nr 17.00
4 80A nr 35.00
5 100A nr 40.00
6 125A nr 126.00
7 160A nr 126.00
8 200A nr 126.00
- SR/68 -
PART II - SWITCHING APPARATUS, FUSES, CONTROLLING APPARATUS
2 32A nr 10.00
3 45A nr 12.00
4 63A nr 18.00
5 80A nr 25.00
6 100A nr 29.00
7 125A nr 34.00
8 160A nr 38.00
9 200A nr 39.00
10 250A nr 78.00
11 300A nr 93.00
12 400A nr 129.00
- SR/69 -
No. Item Description UNIT Rate
(RM)
1 4 ways nr 355.00
2 6 ways nr 380.00
3 8 ways nr 410.00
4 10 ways nr 450.00
5 12 ways nr 495.00
6 14 ways nr 520.00
7 4 ways nr 775.00
8 6 ways nr 860.00
9 8 ways nr 955.00
10 10 ways nr 1,095.00
11 12 ways nr 1,225.00
12 14 ways nr 1,456.00
13 Sub division unit, fully insulated, SPN, 2 way, 15A/16A 6kA mcbs. nr 220.00
- SR/70 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
- SR/71 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
- SR/72 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
- SR/73 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
- SR/74 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
66 200A nr 970.00
- SR/75 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
71 200A nr 1,100.00
76 200A nr 925.00
81 200A nr 1,080.00
- SR/76 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
85 125A nr 1,710.00
86 160A nr 2,145.00
87 200A nr 2,240.00
88 250A nr 2,500.00
89 400A nr 4,100.00
90 630A nr 7,150.00
91 800A nr 9,985.00
92 1000A nr 15,680.0
0
93 1250A nr 18,600.0
0
94 1600A nr 20,980.0
0
98 400A nr 8,900.00
99 630A nr 15,300.0
0
- SR/77 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
- SR/78 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
- SR/79 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
- SR/80 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
1 Front /Rear Access Self Standing metalclad switchboard cubicle as set 2,500.00
per IEE and consisting of the following items of equipment and
accessories
a. 4 Nos. 6mm x 25mm tinned hard drawn high conductivity
copper busbars;
b. 1 Nos. 6mm x 25mm tinned copper earthing bar extending full
width of cubicle;
c. 3 Nos indicating lights (red, yellow and blue) as supply
indicators;
2 Front /Rear Access Self Standing metalclad switchboard cubicle as set 6,000.00
per IEE and consisting of the following items of equipment and
accessories;
a. Incoming cable terminating box or heat shrinkable termination
kit or cable gland;
b. 3 Nos ammeter c/w selector switch and CTs;
c. 1 Nos. 0 – 600V voltmeter c/w selector switch;
d. 3 Nos indicating lights (red, yellow and blue) as SESB supply
indicators;
e. control fuses;
f. 1 set ELR c/w CTs;
g. Anti-condensation heater c/w automatic thermostat control,
ON-OFF switch and indicating light;
h. All internal wiring
i. 4 Nos. 6mm x 25mm tinned hard drawn high conductivity
copper busbars;
j. 1 Nos. 6mm x 25mm tinned copper earthing bar extending full
width of cubicle
3 Wall mounted metalclad switchboard cubicle as per IEE and set 2,000.00
consisting of the following items of equipment and accessories
a. 4 Nos. 6mm x 25mm tinned hard drawn high conductivity
copper busbars;
b. 1 Nos. 6mm x 25mm tinned copper earthing bar extending full
width of cubicle;
c. 3 Nos indicating lights (red, yellow and blue) as supply
indicators;
d. control fuses;
e. All internal wiring
- SR/81 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
4 Wall mounted metalclad switchboard cubicle as per IEE and set 4,500.00
consisting of the following items of equipment and accessories
a. 4 Nos. 6mm x 25mm tinned hard drawn high conductivity
copper busbars;
b. 1 Nos. 6mm x 25mm tinned copper earthing bar extending full
width of cubicle;
c. Incoming cable terminating box or heat shrinkable termination
kit or cable gland;
d. 3 Nos 0-300A ammeters with MD indicators;
e. 1 Nos. 0 – 600V voltmeter c/w selector switch;
f. 1 Nos. power factor meter;
g. 3 Nos indicating lights (red, yellow and blue) as SESB supply
indicators;
h. 1 set 300/5A Class 1.0 15VA C.T.s;
i. control fuses;
j. All internal wiring
5 Wall mounted metalclad switchboard cubicle as per IEE and set 3,500.00
consisting of the following items of equipment and accessories
f. 4 Nos. 6mm x 25mm tinned hard drawn high conductivity
copper busbars;
g. 1 Nos. 6mm x 25mm tinned copper earthing bar extending full
width of cubicle;
h. 1 Nos 0-300A ammeter c/w selector switch;
i. 1 Nos. 0 – 600V voltmeter c/w selector switch;
j. 3 Nos indicating lights (red, yellow and blue) as SESB supply
indicators;
k. 1 set 300/5A Class 1.0 15VA C.T.s;
l. control fuses;
m. All internal wiring
- SR/82 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
- SR/83 -
PART III – DISTRIBUTION BOX, CIRCUIT BREAKER, FUSES, CONTROLLING APPARATUS
- SR/84 -
18. 2000A 50kA/50kA 1 sec TPN Drawout type set 31,265.0
0
- SR/85 -
19. 2000A 65kA/65kA 1 sec 4 Pole Fixed type set 32,180.00
9 20A. nr 21.00
10 30A. nr 31.00
11 45A. nr 49.40
12 20A. nr 33.60
13 30A. nr 64.00
14 45A. nr 82.00
Switch, ceiling.
- SR/86 -
15 10A, 1 way. nr 75.30
- SR/87 -
PART IV –COMPLETE ELECTIRCAL EQUIPMENT
17 20A. nr 20.90
18 30A. nr 26.90
19 45A. nr 49.40
20 20A. nr 23.40
21 30A. nr 32.10
22 45A. nr 58.90
Timer switch.
- SR/88 -
PART IV –COMPLETE ELECTIRCAL EQUIPMENT
B Metalclad switches.
SP switch.
14 20A nr 70.70
15 30A nr 81.90
16 45A nr 94.40
17 60A nr 184.40
- SR/89 -
No. Item Description UNIT Rate
(RM)
18 20A nr 91.90
19 30A nr 101.90
20 45A nr 120.70
21 60A nr 196.90
- SR/90 -
PART IV –COMPLETE ELECTIRCAL EQUIPMENT
C Switch Panel
1 Time Switch Control Panel comprising the following components:- set 800.00
a. 1 Nos. 10A DP Time switch (Quartz)
b. 1 Nos. 63 A TPN contactor (AC3)
c. 1 Nos. 63A TPN Switch Fuse;
d. 1 Nos. 63A rotary type TPN changeover switch
2 Time Switch Control Panel comprising the following components:- set 700.00
a. 1 Nos. 10A DP Time switch (Quartz)
b. 1 Nos. 32 A TPN contactor (AC3);
c. 1 Nos. 32A TPN Switch Fuse;
d. 1 Nos. 32A rotary type TPN changeover switch
D Switch System
1 Wall mounted Recess Mount Stainless Steel Grid Switch System
comprising of stainless steel plate and panel mounting clips
- SR/91 -
No. Item Description UNIT Rate
(RM)
1 15A nr 22.60
2 15A nr 20.40
7 15A. nr 29.00
13 15A. nr 18.60
19 15A. nr 35.40
- SR/92 -
PART IV –COMPLETE ELECTIRCAL EQUIPMENT
F Wiring components.
- SR/93 -
No. Item Description UNIT Rate
(RM)
22 Metalclad meter board for SESB meter with see through window. nr 650.00
- SR/94 -
PART IV –COMPLETE ELECTIRCAL EQUIPMENT
- SR/95 -
PART IV –COMPLETE ELECTIRCAL EQUIPMENT
Earth copper clip for conduit c/w bolt, nut and acc.
- SR/96 -
PART IV –COMPLETE ELECTIRCAL EQUIPMENT
- SR/97 -
PART IV –COMPLETE ELECTIRCAL EQUIPMENT
- SR/98 -
PART IV –COMPLETE ELECTIRCAL EQUIPMENT
Metal board, SWG 16 c/w alloy bush, bolt and ramset nut.
- SR/99 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
A Bulbs:
11 Bulb, High pressure sodium vapour (SON), 240V, E27, 70W. nr 57.00
12 Bulb, High pressure sodium vapour (SON), 240V, E27, 150W. nr 60.00
13 Bulb, High pressure sodium vapour (SON), 240V, E40, 250W. nr 67.00
- SR/100 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
14 Bulb, High pressure sodium vapour (SON), 240, E40, 400W. nr 75.00
18 Tube, 600mm fluorescent, 18W, two pins (G13), min 2500 nr 7.00
lumen.
19 Tube, 1200mm fluorescent, 36W, two pins (G13), min 2500 nr 9.00
lumen.
20 Tube, 1500mm fluorescent, 56W, two pins (G13), min 2500 nr 14.00
lumen.
21 Tube, 600mm fluorescent, 18W, two pins (G13), min 3350 nr 10.00
lumen.
22 Tube, 1200mm fluorescent, 36W, two pins (G13), min 3350 nr 10.00
lumen.
26 Tube, fluorescent 4’, 36W, two pins (G13), quick start, nr 15.00
minimum 2500 lumen.
27 Tube, fluorescent 5’, 58/80W, two pins (G13), quick start, nr 32.00
minimum 2500 lumen.
- SR/101 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
28 Tube, fluorescent, 4’, 36W, two pins (G13), quick start, nr 18.00
minimum 3350 lumen.
29 Tube, fluorescent 5’, 58/80W, two pins (G13), quick start, nr 32.00
minimum 3350 lumen.
Bulbs, PL 240/50Hz: -
32 i. 7W nr 15.00
33 ii. 9W nr 18.00
35 i. 13W/18W nr 30.00
- SR/102 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
B Fluorescent equipments:
1 1 x 18W nr 30.00
2 2 x 18W nr 50.00
3 1 x 36W nr 40.00
4 2 x 36W nr 60.00
5 1 x 18W nr 55.00
6 2 x 18W nr 75.00
7 1 x 36W nr 65.00
8 2 x 36W nr 85.00
9 2 x 36W nr 172.00
10 3 x 36W nr 197.00
11 2 x 58W nr 197.00
12 1 x 18W nr 75.00
13 1 x 36W nr 85.00
14 2 x 36W nr 105.00
- SR/103 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
17 2 x 18W nr 225.00
18 3 x 18W nr 250.00
19 4 x 18W nr 285.00
24 1 x 36W nr 180.00
26 2 x 18W nr 180.00
27 1 x 36W nr 180.00
28 2 x 36W nr 220.00
- SR/104 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
37 1 x 18W nr 85.00
38 1 x 36W nr 90.00
39 2 x 36W nr 115.00
- SR/105 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
- SR/106 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
1 Durable light fitting c/w 60W bulb and white coolicon shade. nr 40.00
2 Anti-vandal durable light fitting c/w 60W bulb and wire nr 50.00
netting.
8 Spot or flood light lamp fitting c/w PAR 38, 100W/150W spot nr 54.00
or flood beam bulb.
9 Spot or flood light lamp fitting c/w PAR 38, 300W spot or flood nr 57.00
beam bulb.
- SR/107 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
- SR/108 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
D Downlight
(Supply & Install)
1. 100mm dia. Ceiling recessed downlight c/w white/gold rim set 115.00
and 10W/13W/18W/23W energy saving lamp.
2. 120mm dia. Ceiling recessed extra-low voltage downlight for set 250.00
dichroic halogen lamp.
3. 125mm dia. Ceiling recessed downlight c/w white/gold rim set 115.00
and 10W/13W/18W/23W energy saving lamp.
5. 150mm dia. Eyeball ceiling recessed downlight c/w reflector, set 235.00
white/gold rim and 12V dichroic lamp.
8. 50W 12V Tungsten Halogen Lamp recessed downlight c/w set 115.00
white/gold rim and 240/12V step down transformer.
- SR/109 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
- SR/110 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
18 58W polyester filled ballast, type 12W standard loss or less. nr 33.00
- SR/111 -
No. Item Description UNIT Rate
(RM)
33 70W, 18uF power factor capacitor for high pressure sodium nr 31.50
vapour lamp.
34 150W, 18uF power factor capacitor for high pressure sodium nr 31.50
vapour lamp.
35. 250W, 30uF power factor capacitor for high pressure sodium nr 45.00
vapour lamp.
36. 400W, 40uF power factor capacitor for high pressure sodium nr 54.00
vapour lamp.
1. 48” diameter ceiling fan c/w regulator, hanger rod, safety wire nr 180.00
and other installation accessories.
2. 60” diameter ceiling fan c/w regulator, hanger rod, safety wire nr 200.00
and other installation accessories.
- SR/112 -
PART V – LIGHTING EQUIPMENTS, LAMP, LAMP COMPONENTS AND FANS
15. Making opening for exhaust fan including framing & plastering nr 100.00
16. Power Factor Capacitor for ceiling fan, 1220mm diameter, nr 7.00
2.2uF, and 380Vac.
19. 26” diameter dehumidifier foggy fan with outdoor misty nr 4,650.00
cooling system incorporating high pressure pump at 0.03litres
per minute per nozzle with a pressure of 400psi.
- SR/113 -
PART VI – OUTSIDE INSTALLATION, STREET LIGHTING, SIGNAL /TRAFFIC LIGHT AND AREA
a. Up to 6 metre nr 1,070.00
- SR/114 -
PART VI – OUTSIDE INSTALLATION, STREET LIGHTING, SIGNAL /TRAFFIC LIGHT AND AREA
a. Up to 6 metre nr 1,190.00
- SR/115 -
PART VI – OUTSIDE INSTALLATION, STREET LIGHTING, SIGNAL /TRAFFIC LIGHT AND AREA
1 1 metre nr 140.00
3 2 metre nr 168.00
5 1 metre nr 280.00
7 2 metre nr 320.00
9 1 metre nr 420.00
11 2 metre nr 455.00
PART VI – OUTSIDE INSTALLATION, STREET LIGHTING, SIGNAL /TRAFFIC LIGHT AND AREA
- SR/116 -
No. Item Description UNIT Rate
(RM)
1 80W nr 350.00
2 125W nr 560.00
3 250W nr 650.00
4 400W nr 920.00
5 70W nr 415.00
6 100W nr 520.00
7 150W nr 685.00
8 250W nr 710.00
9 400W nr 875.00
10 Street light lantern, 90W low pressure sodium vapour bulb nr 580.00
(SOX) c/w control equipment
11 Pole top lantern with opal acryclic bowl c/w control equipment
and mercury vapour bulb (MBF), 240V: -
a. 80W nr 360.00
b. 125W nr 406.00
12 Area flood lighting lantern c/w built-in type control gear and
mercury vapour bulb (MBF): -
a. 80W nr 530.00
PART VI – OUTSIDE INSTALLATION, STREET LIGHTING, SIGNAL /TRAFFIC LIGHT AND AREA
- SR/117 -
No. Item Description UNIT Rate
(RM)
- SR/118 -
b. 125W nr 606.00
c. 250W nr 706.00
d. 400W nr 769.00
a. 150W nr 269.00
b. 300W nr 306.00
c. 500W nr 331.00
d. 750W nr 393.00
e. 1000W nr 434.00
a. 250W nr 820.00
b. 400W nr 869.00
c. 1000W nr 1,300.00
d. 1500W nr 1,350.00
- SR/119 -
PART VI – OUTSIDE INSTALLATION, STREET LIGHTING, SIGNAL /TRAFFIC LIGHT AND AREA
i Red. nr 735.00
ii Amber. nr 735.00
i Red. nr 953.00
ii Amber. nr 953.00
i Red. nr 1,223.00
- SR/120 -
PART VI – OUTSIDE INSTALLATION, STREET LIGHTING, SIGNAL /TRAFFIC LIGHT AND AREA
ii Amber. nr 1,223.00
i Red. nr 1,544.00
ii Amber. nr 1,544.00
i Red. nr 1,409.00
ii Amber. nr 1,443.00
- SR/121 -
PART VI – OUTSIDE INSTALLATION, STREET LIGHTING, SIGNAL /TRAFFIC LIGHT AND AREA
i Red. nr 1,713.00
ii Amber. nr 1,729.00
9 Loop detector
- SR/122 -
PART VI – OUTSIDE INSTALLATION, STREET LIGHTING, SIGNAL /TRAFFIC LIGHT AND AREA
- SR/123 -
PART VII – LOW VOLTAGE UNDERGROUND CABLE AND ACCESSORIES
- SR/124 -
PART VII – LOW VOLTAGE UNDERGROUND CABLE AND ACCESSORIES
- SR/125 -
No. Item Description UNIT Rate
(RM)
- SR/126 -
PART VII – LOW VOLTAGE UNDERGROUND CABLE AND ACCESSORIES
- SR/127 -
PART VIII – MISCELLANEOUS
2 3.3kW instant water heater c/w 40A 10mA rccb, built-in nr 980.00
booster pump.
5 Installation works for GI/uPVC pipe fixing from main pipe to the nr 250.00
instant water heater.
6 Installation works for GI pipe fixing from main pipe to& from nr 400.00
the water heater tank.
128
PART VIII – MISCELLANEOUS
B PN-10 pipe
Supply and install incoming underground pipe below drainage
base (by pipe-jacking)
C MATV
Supply and install
1 UHF / VHF / FM Antennas set 300.00
129
PART VIII – MISCELLANEOUS
D Telephone
Supply and install
a. 10 pairs m 12.00
b. 20 pairs m 22.00
c. 30 pairs m 34.00
d. 50 pairs m 52.00
5 MK III/0.63 gray PVC internal cable from DP box to telephone set 180.00
point c/w flush telephone outlet/socket, termination, etc.
E Networking
Supply and install
2. Surge protector for direct plug into socket outlet and has built- nr 650.00
in phone line splitter
130
PART VIII – MISCELLANEOUS
1 30W 8 ohms horn speaker c/w driver and 50m 22AWG set 650.00
Shielded Twisted Pair Cable
2 50W 8ohms horn speaker c/w 50W driver and 50m 22AWG set 650.00
Shielded Twisted Pair Cable
3 400W 8ohms low frequency speaker system c/w 12" woofer set 5,000.00
and 50m 22AWG Shielded Twisted Pair cable
4 150W 8ohms wall mounted speaker system c/w 50m 22AWG set 2,800.00
Shielded Twisted Pair cable
5 20W 8ohms wall mounted self powered monitor speaker c/w set 2,200.00
50m 22AWG Shielded Twisted Pair cable
6 1W ceiling speaker c/w 50m 22AWG Shielded Twisted Pair set 550.00
cable
10 Paging Microphone c/w 50m 2c screened cable and zone set 750.00
selector
131
PART VIII – MISCELLANEOUS
24 240W 8 ohms Power Amplifier c/w auto changeover unit set 4,600.00
29 40m Detachable Patch Cord (using screened insulated copper set 300.00
cable) c/w XLR connectors at both ends
30 Rack/Cubicle standard 19" Equipment rack c/w ventilation fan set 2,500.00
4 8" theater fresnel aluminium fitting for 300w - 1000w c/w set 1,400.00
colour filters
6 1000W "Profile" aluminium fitting for 300w to 1000w c/w set 1,400.00
colour filters
8 6 x 2.5kW 3 phase Stage Lighting Dimmer c/w control panel set 15,000.00
132
No. Item Description UNIT Rate
(RM)
9 Aluminium truss (pre wired lighting bar 4 metre length with 4 set 2,500.00
x 15A outlets)
10 Aluminium truss (pre wired lighting bar 6 metre length with 6 set 3,500.00
x 15A outlets)
11 Aluminium truss (pre wired lighting bar 12 metre length with 6 set 5,000.00
x 15A outlets)
H STAGE CURTAIN
Supply and Install
1. Vertical arising “Stage Curtain” comprising of the following set 25,000.00
components:-
a. Wall-mounted metalclad Control Panel
b. Up – down controller;
c. Remote switch for “Stage Curtain” at Bilik Kontrol;
d. Stage Curtain motor (1hp 3 phase) c/w all necessary
accessories, coupling, pulley, gearbox, winding drum, steel
wire, wheels, tracks, slider, etc
3. Fabric for Stage Curtain for vertical or horizontal arising c/w m 380.00
necessary installation accessories
Material : Fabric
Fabric width : 54 inches (4.5 feet)
Fabric weight : 20 oz per linear yard
Flame retardant : Inherently flame retardant
Fiber content : 100% IFR Poly.
Colour & Pattern : to be decided by the client
133
BAHAGIAN I - PEMASANGANPERPAIPAN DALAMAN DAN AKSOSERI YANG BERKAITAN
1 Approved High Density Polyethylene (HDPE) water tank with lid fixed
complete:-
a) 19 mm nr 19.25
b) 25 mm nr 22.80
c) 32 mm nr 38.00
d) 38 mm nr 43.70
e) 50 mm nr 55.10
f) 75 mm nr 90.00
3 High Pressure equilibrium ball valve as specified with plastic ball and
thread brazed on brass stem and body with flynut and lead washers
and fixing to cisterm including drilling cistern and jointing to cold water
tubing.
a) 19 mm nr 51.68
b) 25 mm nr 66.48
a) 19 mm nr 324.00
b) 25 mm nr 522.00
c) 32 mm nr 756.00
d) 38 mm nr 828.00
e) 50mm nr 900.00
f) 75 mm nr 3600.00
g) 100 mm nr 4500.00
a) 13 mm nr 21.60
b) 19 mm nr 27.00
c) 25 mm nr 50.40
d) 32 mm nr 86.40
e) 38 mm nr 140.40
f) 50 mm nr 270.00
134
BAHAGIAN I - PEMASANGANPERPAIPAN DALAMAN DAN AKSOSERI YANG BERKAITAN
a) 13 mm nr 18.00
b) 19 mm nr 23.40
c) 25 mm nr 36.00
d) 32 mm nr 46.80
e) 38 mm 54.00
nr
f) 50 mm 77.40
nr
g) 63 mm 99.00
nr
h) 75 mm 129.60
nr
i) 100 mm 180.00
a) 13 mm nr 15.30
b) 19 mm nr 19.80
c) 25 mm nr 30.60
d) 32 mm nr 39.24
e) 38 mm nr 45.00
f) 50 mm nr 63.00
g) 63 mm nr 81.00
h) 75 mm nr 105.84
i) 100 mm nr 154.08
a) 15 mm
b) 20 mm
c) 25 mm
d) 32 mm
e) 38 mm
f) 50 mm
a) 32 mm nr 6.84
b) 40 mm nr 8.28
135
c) 50 mm nr 12.60
d) 75 mm nr 28.44
e) 100 mm nr 49.50
ELBOW
a) 15 mm nr 1.53
b) 20 mm nr 2.61
a) 25 mm nr 3.87
b) 32 mm nr 7.20
c) 40 mm nr 10.80
d) 50 mm nr 19.80
e) 75 mm nr 51.84
f) 100 mm nr 103.68
BEND
a) 15 mm nr 1.53
b) 20 mm nr 2.61
c) 25 mm nr 3.87
d) 32 mm nr 7.20
e) 40 mm nr 10.80
f) 50 mm nr 19.80
g) 75 mm nr 51.84
h) 100 mm nr 103.68
TEE
i) 15 mm 2.25
j) 20 mm 3.24
k) 25 mm 6.30
l) 32 mm 9.90
m) 40 mm 13.32
n) 50 mm 22.68
o) 75 mm 60.48
p) 100 mm 60.48
136
No. Item Description Unit Rate (RM)
a) 15 mm nr 1.17
b) 20 mm nr 1.80
c) 25 mm nr 2.70
d) 32 mm nr 6.48
e) 40 mm nr 9.72
f) 50 mm nr 14.58
g) 75 mm nr 34.56
h) 100 mm nr 64.80
a) 25 mm 10.44
b) 32 mm m -
c) 40 mm m -
d) 50 mm m 19.26
e) 75 mm m 50.22
f) 80 mm m -
g) 100 mm m 122.40
h) 150 mm m -
a) 15 mm m 5.22
b) 20 mm m -
c) 25 mm m 13.14
d) 32 mm m -
e) 40 mm m -
f) 50 mm m 40.68
g) 75 mm m 60.48
h) 80 mm m -
i) 100 mm m 149.40
j) 150 mm m -
90 deg. ELBOW
a) 15 mm nr 5.43
b) 20 mm nr 8.39
c) 25 mm nr 12.31
BAHAGIAN I - PEMASANGANPERPAIPAN DALAMAN DAN AKSOSERI YANG BERKAITAN
137
No. a) 32 mm Item Description nr
Unit Rate 14.44
(RM)
b) 40 mm nr 15.47
EQUAL TEE
c) 50 mm nr 40.15
a) 15 mm nr 7.50
d) 75 mm nr 84.00
b) 20 mm nr 11.18
e) 80 mm nr -
c) 25 mm nr 15.38
f) 100 mm nr 118.80
d) 32 mm nr 17.33
g) 150 mm nr -
e) 40 mm nr 20.70
45 deg. ELBOW
f) 50 mm nr 32.70
a) 15 mm nr 9.00
g) 75 nr 127.50
b) 20 mm nr -
h)
c) 80
25 mm nr 9.60-
i)
d) 100 mm
32 mm nr 142.80-
j)
e) 40
150mm
mm nr -
ENDf)CAP50 mm nr 19.35
g)
a) 75 mm
15 nr
nr 154.10
5.78
b)
h) 20
80 mm nr 7.73-
c)
i) 25
100mm
mm nr 9.38
223.10
d) 32 mm nr 12.90-
j) 150 mm
e) 40 mm nr 16.43
EQUAL SOCKET
f) 50 mm nr 22.05
a) 15 mm nr 7.50
g) 75 103.20
b) 20 mm nr 11.18
h)
c) 80
25 mm nr 15.38-
i)
d) 100 mm
32 mm nr 194.40
17.33
j)
e) 25
40 mm
mm nr
nr 20.70-
14 HDPE
f) pipe grade PN 10 including fixing as specified:-
50 mm nr 32.70
a) 20 mm nr
nr 7.80
127.50
g) 75 mm
b) 25 mm nr 8.37
h) 80 mm nr -
c) 32 mm nr 12.42
i) 100 mm nr 142.80
d) 38 mm nr 10.65
j) 150 mm nr -
e) 50 mm nr 30.24
f) 75 mm nr 59.40
138
BAHAGIAN I - PEMASANGANPERPAIPAN DALAMAN DAN AKSOSERI YANG BERKAITAN
a) 20 mm nr -
b) 25 mm nr 8.55
c) 32 mm nr 10.13
d) 38 mm nr 12.15
e) 50 mm nr 15.68
f) 75 mm nr -
90 deg. ELBOW
a) 20 mm nr 9.38
b) 25 mm nr 14.04
c) 32 mm nr 35.10
d) 38 mm nr -
e) 50 mm nr 58.32
f) 75 mm nr 154.80
EQUAL TEE
a) 20 mm nr 13.20
b) 25 mm nr 20.34
c) 32 mm nr 50.40
d) 38 mm nr -
e) 50 mm nr 88.20
f) 75 mm nr 232.20
STRAIGHT COUPLER
a) 20 mm nr 11.18
b) 25 mm nr 12.60
c) 32 mm nr 28.80
d) 38 mm nr -
e) 50 mm nr 51.30
f) 75 mm nr 126.00
139
BAHAGIAN I - PEMASANGANPERPAIPAN DALAMAN DAN AKSOSERI YANG BERKAITAN
a) 20 mm nr 8.03
b) 25 mm nr 10.05
c) 32 mm nr 17.47
d) 38 mm nr -
e) 50 mm nr 27.90
f) 75 mm nr 87.48
a) 20 mm nr 8.55
b) 25 mm nr 10.65
c) 32 mm nr 19.44
d) 38 mm nr -
e) 50 mm nr 46.62
f) 75 mm nr -
REDUCER COUPLING
a) 20 mm nr -
b) 25 mm nr 13.20
c) 32 mm nr 21.42
d) 38 mm nr -
e) 50 mm nr 44.82
f) 75 mm nr 126.00
BAHAGIAN II - PEMASANGAN PENDINGIN UDARA JENIS PISAH DAN AKSOSERI YANG BERKAITAN
140
No. Item Description Unit Rate (RM)
1 Complete Installation Air Cooled Split Unit including one (1) meter
refrigerant piping, wiring works, casing, bracket, clips, vibration pad
and all others necessary required.
Wall Mounted
Ceiling mounted
Ceiling Cassete
BAHAGIAN II - PEMASANGAN PENDINGIN UDARA JENIS PISAH DAN AKSOSERI YANG BERKAITAN
141
No. Item Description Unit Rate (RM)
142
DAYWORK RATES (CONT’D)
The foregoing Schedule of Rates and percentage increase or decrease for Daywork
Labour Rates as set down by the successful tenderer on Pages SR/147 inclusive have
been scrutinized and agreed to by me as reasonable.
……....................................................….
(Superintending Officer)
143
Date : .....................….............................
CONTRACT NO. ................................................................ of the year ........................
number 1 to ................. inclusive which shall be read and construed as part of the said
Contract.
.....................................…………..... .....................................………….....
(Contractor)
...........................................………. ...........................................……….
(Witness) (Witness)
144