Professional Documents
Culture Documents
Ac Merk Denso Indonesia
Ac Merk Denso Indonesia
Introduction
PT DENSO INDONESIA is Foreign Capital Investment Venture between private enterprises of Japan and their Indonesia
counter parts, and is on of the leaders in the manufacture of automotive components such as Air Conditioner, Sparkplug,
Filter and others Established on May 12nd, 1975
Denso Indonesia has two plants :
1 High Performance
High cooling performance and air flow volume have been achieved by the introduction of hight efficientevaparator and
condenser and lowering air flow resistance
This high performance standard model can be applicable for extreme ambient conditions (up to 55 c)
2 Wide and Slim Design
Slim and curved design fits nicely onto the roof of the bus, creating a smooth integration A/C System into the bus
ide design ensures smooth flow of cool air directly into the ducting inside the bus, eliminating the need for sub-ducts
3 Environment Friendly
6% futher reduction of refrigerant amount to 4.5kg. This amount is far less than any other manufacturer's indicated
specification
Fuel saving has been achieved by increased refrigeration cycle efficiency with the new multi-flow condenser and front
design of improved air intake
AIR CONDITIONER
Condenser
The condenser is a heat exchanger that cools, condenses and liquefies the high-temperature, high-pressure gas refrigerant sent from
the compressor. The quantity of heat emitted from the condenser equals the sum of the heat quantity absorbed in the evaporator, and
the heat quantity added by compression performed in the compressor. High-temperature, high-pressure refrigerant discharged from the
compressor is cooled and condensed by ambient air while passing through the condenser, resulting in a high-temperature, high-
pressure liquid refrigerant.
Compressor
Low-temperature, low-pressure gas refrigerant that has been vaporized in the evaporator through the extraction of heat from the vehicle
interior is suctioned and compressed by the compressor. The compressor then sends a high-temperature, high-pressure gas to the
condenser that can be readily liquefied. The car A/C system compressor is driven* by a belt from the engine and a magnetic clutch
Expansion Valve
- The expansion valve causes rapid refrigerant expansion by injecting high-temperature, high-pressure liquid refrigerant through a small
orifice, in effect creating a low-temperature, low-pressure mist refrigerant.
- The expansion valve adjusts the refrigerant quantity according to the state of refrigerant vaporization in the evaporator. As a result,
conditions are maintained under which liquid refrigerant takes heat from the surrounding air so that refrigerant is continuously
evaporated at the evaporator outlet.
Evaporator
- The evaporator consists of a tank, tubing, and fins. Refrigerant that has been liquefied in the condenser, and then changed into a low-
temperature, low-pressure mist by the expansion valve takes heat from the surrounding air and is vaporized in the evaporator. As a
result, the evaporator itself is in a low-temperature state.
- Warm air circulating within the vehicle (or that has been drawn in from outside the vehicle) is cooled by passing over the evaporator,
which in turn cools the passenger compartment. In addition, when warm air comes into contact with the evaporator fins and is cooled to
or below the dew point temperature, moisture within the air is condensed to form water droplets. These water droplets are discharged
outside the vehicle by a drain hose.
For Denso HKLD6-LD7 blower Evaporator for bus ac spare
parts
Automotive air conditioning motors, including air conditioning condenser fan motors and air
conditioning evaporator blower motor. In the car, the engine radiator and the condenser of the
vehicle air conditioning system is installed together, using the same motor fan for ventilation and
cooling. Automotive air conditioning motors shall include the radiator fan motor, condenser fan
motor and air conditioning evaporator blower motor. High-grade cars are often equipped with roof
windows, roof windows opening and closing motor also belongs to the motor vehicle air-
conditioning systems.
For Denso HKLD6-LD7 blower Evaporator for bus ac spare parts Parameters
1 part Name HKLD6-LD7
2 Name Evaporator fan Condenser Fan AC Blower
3 Place of Origin Guangdong, China (Mainland)
4 Brand Name SHUMATT
5 Voltage 24V
6 Current 11A
7 Speed 3600rpm
8 Static pressure 100Pa
9 Air flow ≥1000m3/h
10 type Adjustable motor fan, electronic resistors
11 certification CE, ROHS certificated
12 warranty 1 year
13 Structure Industrial engineering plastics
14 Material Environmental friendly materials & waterproof
15 Operation temperature -25~85
16 life time 10000 hours
17 Size 350 mm length
18 net weight 3kg
19 gross weight 3.5kg
20 packing 4 pcs/carton
21 Insulation class B
22 Type DC Motor
For Denso HKLD6-LD7 blower Evaporator for bus ac spare parts Specifications:
1.Suitable scope
All kinds of bus air-conditioning system, including 5M ~ 15M bus. It is also ok for city bus, long
long-distance trip buses and big machine models( engineering vehicles)
2.Suitable vehicles
All brands of Chinese bus, Asian bus and big machine models( engineering vehicles), Our
customers are all from Asian, Middle east, Africa countries.
3.Suitable vehicles brands
Yutong, KingLong, ANKAI, Zhongtong, Golden Dragon, Higer, SHAOLINAUTO, HUANGHAI MOTOR,
JAC, Yaxing, YOUNGMAN etc
4.Product description
1)Brush motor blower for bus evaporation.
2) Long working life span .
3) 1 year warranty. For over 3 years experiences,our bus air conditioner blower are in high
efficiency, long use life time and low noise. Our popular models including brush fan and brushless
fan, brush models running time is about 10000 hours, brushless models are double, about
20000hours. All our tools get CE & RHOS certificated. Up to now, our main market are in Asian,
Middle east,Africa,and some europe countries.As the first choice bus ac supplier, Shumatt will
provide you top quality tool in good price.
5.Special Description
Our company also supply OEM service, all our air conditioner produtcts are compliable with
international standards and specifications. If you can not find 100% same model as we show in
this web, please firstly confirm the size and picture. Any special demands, please do not hesitate to
let us know. All shumatt people will try our best to make sure you get what you want!
Pictures of evaporator fan HKLD6-LD7
Evaporator fan HKLD6-LD7 picture 1
Evaporator fan HKLD6-LD7 picture 2
Evaporator fan HKLD6-LD7 picture 3
Evaporator fan HKLD6-LD7 picture 4
Our service commitment:
Lowest price
Stringent quality tests
Professional technical support
One year warranty
Questions(0)
Equiry us: hison@shumatt.com
Dilihat:157
Masih belum,,, sungguh terlalu ( hehe bercanda jangan di ambil hati yah, diambil sayang aja hihi)
1. Freon didalam kompresor akan ditekan sehingga meningkatkan tekanan dan mengembang,
setelah itu akan dialirkan ke kondensor.
2. Kondensor disini berfungsi untuk mengatur tekanan freon tidak melebihi batas sehingga
kompresor tidak jebol.
3. Setelah memlalui kondensor dialirkan ke RECEIVER DRYER yang berfungsi untuk menyaring
kotoran yang ada dan fungsi lainnay adalah untuk melihat apakah freon masih banyak ataukah
sudah perlu diisi atau ditambah.
4. Dari receiver dryer, diteruskan ke bagian ekspansi yang bertugas untuk mengkabutkan freon
tersebut sebelum memasuki evabrator.
5. EVABRATOR bertugas untuk lebih mendinginkan lebih mendinginkan dan mengeluarkan hawa
( udara) dingin yang akan disalurkan oleh Motor Evab ke dalam Kabin kendaraan,
6. Keluar dari Evab freon diteruskan ke Kompresor lagi dan siklus itu berulang seperti itu terus
menerus sampai suhu yang dinginkan tercapai atau dimatikannya AC kendaraan ( ya iya lah lha
wong dimatiin ACnya heem )
Nah sekian dulu yah tulisan yang sedikit ini, semoga bermanfaat bagi temen-temen, mas bro, mbak bro
sekalian.
Jangan lupa percayakan AC kendaraan Anda pada Spesialis AC kendaraan GT Airvindo OK
o Menjaga mobil tetap prima & menjamin kenyamanan Anda dalam berkendara, karena
o Diperbaiki oleh teknisi yang terlatih dan berpengalaman, serta hanya menggunakan suku
o Harga jual kembali kendaraan anda tetap tinggi saat anda menjualnya kembali.
o Penyetelan terhadap komponen mesin sesuai dengan standar yang berlaku untuk
kendaraan MITSUBISHI.
o Learning program atau mengembalikan data-data ke setelan awal kendaraan sesuai data
awal kendaraan.
Bengkel
Perawatan
Periode
Fasilitas
PENGGANTIAN PERIODE
Oli Mesin (Mesin Bensin) 10.000 Km atau 6 bulan
Oli Mesin (Mesin Diesel) 5.000 Km atau 3 bulan
Oli Transmisi Manual 40.000 Km atau 24 bulan
Oli Transmisi Otomatis/CVT 40.000 Km atau 24 bulan
Oli Gardan 20.000 Km atau 12 bulan
Saringan Oli (Bensin/Solar) 10.000 Km atau 6 bulan
Saringan Bahan Bakar Bensin 60.000 Km atau 36 bulan
Saringan Bahan Bakar Solar 20.000 Km atau 12 bulan
Saringan Udara 20.000 Km atau 12 bulan
Air Radiator 40.000 Km atau 24 bulan
Oli Power Steering 50.000 Km atau 30 bulan
Minyak Rem & Kopling 40.000 Km atau 24 bulan
Timing Belt 100.000 Km atau 60 bulan
Busi (selain tipe Platinum/Iridium) 20.000 Km atau 12 bulan
Busi tipe Platinum/Iridium 100.000 Km atau 60 bulan
V-Belt Tergantung kondisi saat pemeriksaan
DIPERIKSA/DIBERSIHKAN/PENYETELAN
Oli Transmisi Manual 10.000 Km atau 6 bulan
Oli Transmisi Otomatis/CVT 10.000 Km atau 6 bulan
Oli Gardan 10.000 Km atau 6 bulan
Saringan Udara 10.000 Km atau 6 bulan
Air Radiator 10.000 Km atau 6 bulan
Oli Power Steering 10.000 Km atau 6 bulan
Sistem Rem & Minyak Rem 10.000 Km atau 6 bulan
Setel Klep 20.000 Km atau 12 bulan
V-Belt 20.000 Km atau 12 bulan
Injector & Timing Belt 50.000 Km atau 30 bulan
CATATAN:
o Untuk item yang ditandai baik jarak (km) maupun waktu (bulan), pemeriksaan/penggantian
o DENSO INDONESIA as an Original Equipment Supplier, developing and supplying Orginal Equipment (OE) parts
directly to vehicle manufactuers (OEM's).
Thermal Systems
Electric Systems
Actuator Starter
Alternator Vacuum Pump
Magneto Washer System
Power Window Motor Wiper System
Relay & Flasher
Electronic Systems
CDI Instrument Cluster
ECU
Price:Rp1.00
Kami menyediakan Kompressor Ac Bus Bekas pakai maupun Kompressor Remanufacture dengan kondisi prima dengan
Kami juga menyediakan berbagai macam Komponen maupun Onderdil Ac Bus seperti Extafan SPAL Original, Evaporator
Blower SPAL Original, Altenator Regulator, Control Panel Thermo King Original, Magnetic Clutch, dan masih banyak lagi Spare
Parts Ac Bus yang berkualitas dengan harga terjangkau, Dijamin Anda puas dengan layanan kami.
E-mail: agungwijayaac@yahoo.com
Indonesia
Hubungin Kami
Hub Teknisi
Alamat Email
admin@agungwijaya.com
L eave
a Reply
PT. Frigia Airconditioning
JalanSoekarno-Hatta No.511 bandung 40265
022-7301985
022-7309881
PHONE 022-7301985
FAX 7309881
EMAIL cabshatta@frigia.co.id
TEKNISI 22 orang
Car Air Conditioner and AC SHop (Genuine Denso and Special Order), Bus Air
SERVICES
Conditioner, Truck AC, Truck Refrigerator, Radiator, Special Order (Prototype)