Professional Documents
Culture Documents
POXYGARD UL - SL
Version : 1.0
PRODUCT DESCRIPTION : POXYGARD UL - SL is a pre-weighed self-leveling epoxy underlay floor coating system. It is a three
component epoxy system with selected aggregates, pigmented epoxy resins and a hardener. POXYGARD UL - SL provides a hard,
smooth, impervious and easy to clean surface. POXYGARD UL - SL has an excellent adhesion to any Epoxy / PU based coatings
Waterproofing |Floor Coatings |Concrete Repair |Anti Corrosive Coatings | Sealants and Adhesives | Waste and Water Solutions
Product # 349
POXYGARD UL-SL Version : 1.0
Diesel Pass
STORAGE AND SELF LIFE:
Petrol Pass
Store the material at temperatures between + 10° C and
Kerosene Pass + 35° C in originally sealed packages, the material can
Xylene Short Term be stored for twelve months. But, before opening the
drums, be assured that the temperature of the materials
Milk Pass has the ambient temperature to avoid condensation. Open
Citric Acid (15%) Pass containers of material should be used quickly to avoid
moisture contamination. If a container needs to be
Sodium Hydroxide (50%) Pass
resealed, it should be blanketed with nitrogen to minimize
Salt Pass water exposure.
HCl (10%) Short Term
H2SO4 (40%) Short Term SAFETY:
This material is intended to be used by trained
HNO3 (10%) Short Term
professionals with the proper equipment. The following
All tests are done for 7 days at 25° C. Short term means safety measures are recommended:
for few hours and should be regular clean. » Wear protective gloves, clothing, goggles, hearing
protection for noise reduction and hard hats for falling
debris.
LIMITATIONS:
» Do not eat, drink or smoke while in active contact with
» Do not apply POXYGARD UL-SL on surfaces known to,
these materials.
or likely to, suffer from rising dampness, potential
osmosis problems or having relative humidity greater » Avoid skin contact.
than 75 %. » Wash hands thoroughly with soap and cool water.
» Do not apply POXYGARD UL-SL to asphalt, weak or » Never wash the skin with a solvent.
infirm concrete, unmodified sand / cement screeds, » Anyone experiencing difficulty breathing when working
PVC tiles or sheets, or substrates known to move with these materials or showing an allergic reaction
substantially e.g. steel walkways. should seek fresh air immediately and consult a
» Do not install POXYGARD UL-SL at temperature < 10° physician if symptoms persist.
C or > 45° C.
» Do not apply POXYGARD UL-SL over treated expansion DISCLAIMER
joints. Treat expansion joints with any suitable sealant.
Chowgule Construction Chemicals products though are
» In common with all epoxy material, some light shed guaranteed against defective materials and manufacture
may fade in the long term, when place in adverse and are sold subject to its standard terms and conditions
exposed condition. Such changes, if any, are normal of sale, copies of which may be obtained on request.
and have no effect on the performance of POXYGARD Chowgule Construction Chemicals wishes to clarify that
UL- SL. any advice, recommendation, specification or information
is accurate and correct, though it cannot, at any time
Please contact Chowgule's for installation of assume any liability either directly or indirectly arising
from the use of its products. This is because it has no
floor coating over
direct or constant control over where or how its products
» Oil / Fat rigged floors are applied, and whether or not in accordance with the
» Floors with moisture content over 5% advice specification, recommendation or information given
» Floors with rising moisture problem by it.
» Asphalt based floor (interior)
» Floors with a pull off strength less than 1.5 N / mm2
Waterproofing |Floor Coatings |Concrete Repair |Anti Corrosive Coatings | Sealants and Adhesives | Waste and Water Solutions