Professional Documents
Culture Documents
Abrasion ASTM D4060 - "Abrasion 1 x 400µm dft applied directly Average of 179mg weight
Resistance of Coatings via to Sa2½ blasted steel. loss per 1000 cycles using
the Taber Abraser" CS17 wheels and a 1Kg
loading.
Cathodic ASTM G8 - "Cathodic 1 x 400µm dft applied directly Typically less than 3mm
Disbondment Disbonding of Pipeline to Sa2.5 blasted steel. disbondment following 30
Coatings" , Method A @ -1.5 days exposure at 23°C.
volts
Cathodic ASTM G42 - "Cathodic 1 x 400µm dft applied directly Typically less than 3mm
Disbondment Disbondment of Pipeline to Sa2.5 blasted steel. disbondment following 30
Coatings Subjected to days exposure at 50°C.
Elevated Temperature"
Hardness ASTM D2583 - "Hardness 1 x 350µm dft applied directly 75 - 80 using a Barcol
(Barcol) evaluation via the Barcol to Sa2½ blasted steel. Model GYZJ 925 Impressor
Impressor"
Immersion ISO 2812 Part 2 - 1 x 400µm dft applied directly No film defects following
"Resistance to water to Sa2½ blasted steel. 8760 hours exposure.
immersion @ 60°C"
Test Performance Results were obtained in a controlled laboratory environment, as specified in the Test Method. International Protective Coatings makes
no representation that the exhibited published test results, or any other tests, actually represent results found in all field environments
15/01/2009
Page 1 of 1
www.international-pc.com