Professional Documents
Culture Documents
How To Guide For Solution Manager Security Optimization Self Service (SOS) REPORTING PDF
How To Guide For Solution Manager Security Optimization Self Service (SOS) REPORTING PDF
This document describes how to use the SAP Security Optimization Self Service in your local Solution
Manager
6. Mark the self services “SAP System Security Optimization” and hit the button "Create"
9. On the tab "Documents and SDCCN Data you can check the status of the required data
download from the managed system.
OR
10. The required SDCCN Download will be available within 24 hours. You can either start
processing the session questionnaire while you are waiting the automatic download, Start the
ST14-Analysis of force the collection and transfer of the SDCCN download data.
4. If the status is 'Request sent' select 'Start Data Collection' in the drop down menu next to the
Execute Button and hit 'Execute’. Once you have done this, the SDCCN Download will be
available on the Solution Manager within several minutes. Note: The status will not change
from 'Download request sent' unless the download has been received on the Solution
manager. This will change the status to 'receive data' (meaning 'Data received)
3 Creation of the ST14 Download in the analysed system
Create the ST14download in the PRD system that should be analyzed with the Security Optimization
Service and send it to the Solution Manager.
1. Connect to the satellite system and call transaction ST14
2. Select the application “Security Optimization”
4. Complete the input parameters of the selection screen as described in the picture
below and press “Schedule job” .
Tried J2EE--
7. ST 14 Utility Analysis Browser. Selected as Remote system and sends the analysis to the
Solution Manager using the “Send” push button. Confirm the two dialog popup using the “Send”
and the “OK” button.
Note: wait till the status changed into “COMPLETE” then “Send”
4 Completing the Questionnaire for the Service Session
The Questionnaire is used to influence the content and the look of the resulting service
report.
1. Enter the detailed data of you session by double clicking the System Security Optimization session on
the Service Plan -> Self Delivered Services tab
3. In the bottom line of the detailed data sheet of you session hit "Create Questionnaire" to create the
session. The button name switches to "Edit Questionnaire". Hit Edit to process the questionnaire.
o Tip: In the Word Document it’s not easy to add lines, but it’s easy to add, copy, insert in SAP
(import the DOC then edit and then export for next time’s use).
4. Check if the selected applications are correct and press “Save” . The questions corresponding to
the selected applications show up when you open the corresponding sub tree in the menu on the
left hand side.
2. Select the check “Collect ST14 data into session”. Call the analysis browser with the push button
“Analysis browser” and search for the correct GUID. Then “Copy and Paste” the GUID into the
GUID field of the check table.
3. You can now close the analysis browser again.(If you know the GUID you can also copy it directly
into the check table without calling the Analysis Browser.)
4. Press “Done”
5. Go to check “Read St14 Download”, set the flag in the column “Execute” in from of your GUID and
press “Save”
7. Now you can generate the service report using the push button “Word Document”. MS Word will
start and the document will be generated. Please be patient until the report generation is finished.