BEFORE THE CHALLENGING MIDTERMS? Design of Columns;
Slenderness Ratio;
Design Formulas and application of these formulas;
and
Design of Glued-laminated and built-up columns.
LEARNING OBJECTIVES FOR THIS LECTURE: ➢Design structural member subjected to combined bending and compression. COMBINED BENDING AND TENSION When bending moment occurs simultaneously with an axial tension force
➢The effects of these combined stresses must be
taken into account COMBINED BENDING AND TENSION COMBINED BENDING AND TENSION Interaction equation: COMBINED BENDING AND TENSION
Basic straight line
interaction formula SAMPLE PROBLEM: BENDING AND TENSION Analyze the adequacy of the 2”x8” (nominal section) lower chord of a truss with an expected loading of 2 kN/m and a tensile force equal to 50 kN. Connections are assumed to be pinned. The total span is 4.0m. Assume that the lateral buckling is prevented by the ceiling. Properties of Agoho: Fb = Ft = 26.3 MPa, E = 8.22 GPa. Assume normal duration and dry service condition.