Professional Documents
Culture Documents
PRODUCT BENEFITS
Crack filling ability Adhesion
Strong filling capacity for cracks of up to 3mm width. Very strong adhesion on all absorbent surfaces like WATER BASED
strength. Easily over coated by emulsion paints from Asian Paints. Lead, Mercury, Arsenic or Chromium
from April 2008.
Waterproofing
Water resistant film stops water ingress through cracks.
PRODUCT FEATURES
AVAILABLE PACKS COLOURS AVAILABLE COVERAGE
2 COATS
360 gms 900 gms 75 running
ft/kg
Shelf life: 1 year from date of manufacture in original tightly *Please note: SmartCare Crack Seal is an
closed containers away from direct sunlight and excessive undercoat
heat.
6-8
0
45 15
30
HOURS
Can be used for cracks on all interior and exterior absorbant surfaces, cracks and gaps caused by drying and shrinkage.
HOW TO APPLY
PRE PAINTING STEPS APPLICATION PROCESS
CLEANING Open the cracks APPLICATION CODE THINNER DILUTION % APPLICATION RECOATING
and widen the cracks to VISCOSITY1 PERIOD
form a ‘V’ shaped groove.
This will provide a strong STEP 1
FIRST COAT SMARTCARE
base for adhesion of Crack CRACK SEAL
Seal to the substrate. Clean PUTTY KNIFE / TROWEL 1050 N/A N/A N/A 4 - 6 HRS
ADDITIONAL INFORMATION
For the best performance of the paint, ensure > Do not apply for cracks of more than 3mm width.
proper washing and cleaning of all algal and > Do not apply on wet surfaces.
fungal growth, if any, at regular intervals of > Meant for plaster cracks. Do not apply on structural on joint cracks.
six months.
a. Form: Ready to use paste > Kindly refer to the MSDS for Asian Paints SmartCare Crack Seal gives detailed information on
b. Density at 25ºC: 1.28 safety measures while handling the paint, which is available on request.
c. Drying Time: Minimum 6 hours depending > Store the container with the lid tightly closed in an upright position, in a cool, dry place
on temperature and humidity > Keep out of reach of children and away from eatables.
d. Flash Point: Crack Seal is a water based > May be harmful if swallowed. In case of ingestion seek immediate medical attention.
which is not flammable > Wear eye protection during application. In case of contact with eyes, rinse immediately with
e. Consumption: 75 - 80 running feet / kg / 2 plenty of water and seek medical advice.
coats (3mm wide and 5mm deep) > In case of skin contact immediately wash skin with soap and plenty of water. Get medical
attention if irritation develops or persists.
> Do not breathe vapour or spray.It is recommended to wear suitable nose pad during sanding
and surface preparation to avoid dust inhalation.
> Do not pour leftover paint down the drain or in water courses.
> In the event of spills, contain spillage using sand or earth.
> No added Lead, Mercury or Chromium compounds.
Version No. VN01/01/2014. Please note that this datasheet supersedes all previous versions
For Feedback/complaints, write to Marketing Manager Services Asian Paints Limited, 6A, Shantinagar, Santacruz(E), Mumbai 400 055, India