The document lists 6 items and their associated reference standards and required tests for quality control. Item 1 is MS plates, angles, beams and channels that require chemical, tensile, yield, elongation, bend and impact tests per IS 2062. Item 2 is rolled sections like tubes and pipes that require chemical, tensile, yield, elongation, flattening and bend tests per IS 1161 and IS 4923. Item 3 is hardware like bolts, nuts and washers that require chemical, tensile, yield, elongation, proof, hardness and SST tests per IS 1367-3 and IS 1367-6.
The document lists 6 items and their associated reference standards and required tests for quality control. Item 1 is MS plates, angles, beams and channels that require chemical, tensile, yield, elongation, bend and impact tests per IS 2062. Item 2 is rolled sections like tubes and pipes that require chemical, tensile, yield, elongation, flattening and bend tests per IS 1161 and IS 4923. Item 3 is hardware like bolts, nuts and washers that require chemical, tensile, yield, elongation, proof, hardness and SST tests per IS 1367-3 and IS 1367-6.
The document lists 6 items and their associated reference standards and required tests for quality control. Item 1 is MS plates, angles, beams and channels that require chemical, tensile, yield, elongation, bend and impact tests per IS 2062. Item 2 is rolled sections like tubes and pipes that require chemical, tensile, yield, elongation, flattening and bend tests per IS 1161 and IS 4923. Item 3 is hardware like bolts, nuts and washers that require chemical, tensile, yield, elongation, proof, hardness and SST tests per IS 1367-3 and IS 1367-6.
Internal Friction and Ultrasonic Attenuation in Solids: Proceedings of the Third European Conference University of Manchester, England, 18-20 July 1980