4242 Theory: 2 hr. theory and 1 hr. tutorial/ Week 1 An introduction to steel structures. 12 4 Simple connections: Bolted Connection : Lap joint ,Butt Joint, High-Strength bolts, Bearing-type connection, Slip-critical connection, Size and Use of Holes, Possible modes of failure of bolted connections, Minimum spacing, Minimum edge distance, Maximum edge distance, Shear strength of high-strength bolts, Bearing strength at bolt holes, Bolt strength in slip-critical connections, Gross and Net areas, Tensile strength. 2 Welded connections : Types of welding : fillet weld, Groove weld and plug or 6 2 slot weld, Minimum size of weld, Maximum size of weld, Minimum length of weld, Maximum length of weld, End returns, Shear strength on the base metal. 3 Tension members: Tensile strength, Slenderness limitations, Effective area, Block 9 3 shear, Build-up members. 4 Compression members: Euler Elastic Buckling, Effective length (KL) and 9 3 effective length factor (K), Types of buckling in compression members (Local buckling and overall buckling), Flexural Buckling of steel columns, Compressive Resistance, Limiting Slenderness Ratio, Design of compression members. 5 Beams: Bending Stress and the Plastic Moment, Stability (web and flange local 9 3 buckling), Lateral-torsional buckling, Nominal Bending Strength, Bending Strength of Noncompact Shapes, Shear resistance, Deflection. Sum 45 15