The document lists 6 items and their corresponding reference standards and required tests. It shows that MS plates, angles, beams and channels per IS 2062 require chemical, tensile, yield, elongation, bend and impact tests. Rolled sections like tubes and pipes per IS 1161 and IS 4923 require chemical, tensile, yield, elongation, flattening and bend tests. Hardware like bolts, nuts and washers per IS 1367-3 and IS 1367-6 require chemical, tensile, yield, elongation, proof, hardness and SST tests.
The document lists 6 items and their corresponding reference standards and required tests. It shows that MS plates, angles, beams and channels per IS 2062 require chemical, tensile, yield, elongation, bend and impact tests. Rolled sections like tubes and pipes per IS 1161 and IS 4923 require chemical, tensile, yield, elongation, flattening and bend tests. Hardware like bolts, nuts and washers per IS 1367-3 and IS 1367-6 require chemical, tensile, yield, elongation, proof, hardness and SST tests.
The document lists 6 items and their corresponding reference standards and required tests. It shows that MS plates, angles, beams and channels per IS 2062 require chemical, tensile, yield, elongation, bend and impact tests. Rolled sections like tubes and pipes per IS 1161 and IS 4923 require chemical, tensile, yield, elongation, flattening and bend tests. Hardware like bolts, nuts and washers per IS 1367-3 and IS 1367-6 require chemical, tensile, yield, elongation, proof, hardness and SST tests.
Internal Friction and Ultrasonic Attenuation in Solids: Proceedings of the Third European Conference University of Manchester, England, 18-20 July 1980