Professional Documents
Culture Documents
Features Measurements
4000 Counts on Large LCD Display AC/DC Voltage
Autoranging with Manual Override AC/DC Current
Relative zero, Data Hold, and Range Hold Diode Test
10A Fuse Protection Resistance
Overload protection and indication Capacitance
Auto Power Off saves battery life Frequency
Includes protective holster, batteries, Temperature
and test leads Continuity
CE Compliant Duty Cycle
IRM\13440215.DOC
STG02-02 3
Input Limits
Function Maximum Input
V DC, VAC 600V DC/AC
Ohms, Capacitance, Diode, Frequency, 250V DC/AC
Continuity
mA DC/AC 400mA DC/AC
10A DC/AC 10A DC/AC (30sec. max)
IRM\13440215.DOC
STG02-02 4
NOTE: Accuracy is stated at 65o F to 83o F (18o C to 28o C) and less than 70% RH.
Diode Test Test current of 0.3mA maximum, open circuit voltage 1.5V DC typical
Continuity Check Audible signal will sound if the resistance is less than approximately 30Ω,
test current <0.7 mA
Temperature sensor Requires type K thermocouple
Input Impedance 7.5 MΩ (VDC and VAC)
Display 4000 count LCD
Overrange indication “OL” is displayed
Polarity Automatic (no indication for positive polarity); Minus (-) sign for negative
polarity.
Measurement Rate 2 times per second, nominal
Auto Power Off Meter automatically shuts down after 15 minutes of inactivity
Low Battery Indication “BAT” is displayed if battery voltage drops below operating voltage
Batteries Requires two 1U9535 AAA batteries
Fuses mA, µA ranges, 8Q6668, 0.5A/250V f blow
10A range, 212-2159 , 10A/250V fast blow
Operating Temperature 32o F to 122o F (0o C to 50o C)
Storage Temperature -4o F to 140o F (-20o C to 60o C)
Relative Humidity <70% operating, <80% storage
Operating Altitude 7000 ft (2000 meters) maximum.
Weight 9.17 oz. (260g).
Size 4.78” x 2.38” x 1.57” (121.5mm x 60.6mm x 40mm)
Safety For indoor use and in accordance with Overvoltage Category II, Pollution
Degree 2. Category II includes local level, appliance, portable equipment,
etc., with transient overvoltages less than Overvoltage Category III.
Replacement Lead Set 212-2158
Optional Temp Probe 8T0458
Don’t be surprised if the Compact Digital Multimeter becomes the most popular tool in the
shop. With questions on this value priced tool, please contact the Caterpillar Service
Technology Group Hotline at 309-675-6277.
This IRM can be viewed and downloaded electronically from the Internet. Please refer to your
marketing organization specific site for access to the Electronic Sales Library which contains all of the
active IRMs and product support communication materials.
IRM\13440215.DOC