The document describes an industrial-grade Ethernet module that is certified to category 6 compliance standards. It has thermoplastic or metal housings suitable for harsh environments, bayonet-style mating for a secure seal, and expanded temperature operating range. Key features include optimized cable layout for high bandwidth, insulation displacement connectors, and protective caps that allow installation or removal of cables without signal degradation.
The document describes an industrial-grade Ethernet module that is certified to category 6 compliance standards. It has thermoplastic or metal housings suitable for harsh environments, bayonet-style mating for a secure seal, and expanded temperature operating range. Key features include optimized cable layout for high bandwidth, insulation displacement connectors, and protective caps that allow installation or removal of cables without signal degradation.
The document describes an industrial-grade Ethernet module that is certified to category 6 compliance standards. It has thermoplastic or metal housings suitable for harsh environments, bayonet-style mating for a secure seal, and expanded temperature operating range. Key features include optimized cable layout for high bandwidth, insulation displacement connectors, and protective caps that allow installation or removal of cables without signal degradation.
Be independently verified for category 6 compliance
Be available in both metal and chemical-resistant, industrial-grade thermoplastic housings for protection in harsh and punishing environments Have bayonet style mating with redundant gaskets to ensure proper plug depth and provide an IP66/IP67 rated seal Have an expanded operating temperature range of -25°C (-13°F) to 85°C (185°F) Utilizes TRI-BALANCE technology with optimized pair balance design and linear crosstalk response to address applications up to 250 MHz Have 310 style insulation displacement connectors with quadrant pair isolation and a Pyramid wire entry system Allow termination with a single conductor impact tool Be backwards compatible to allow lower performing categories of cables or connecting hardware to operate to their full capacity Have rear protective strain relief caps with side or rear entry, which can be installed onto cable before or after termination Support industry standards for T568A or T568B wiring options on each individual outlet Allow for a minimum of 200 terminations without signal degradation below standards compliance limits Have protective dust caps to protect any unused outlets or seal an outlet during wash down periods when the outlet and plugs may be disconnected. Must be certified by Underwriters Laboratories to United States Standards and C22.2 Canadian Telecommunications Standards Meet the following performance specifications:
Margin over category 6 @ 250MHz
Parameters Worst Case Typical Insertion Loss (dB) 0.12 0.14 NEXT* (dB) 0.84 4.37 FEXT* (dB) 2.1 5.1 Return Loss (dB) 6.9 8.3 * Tested in both Differential and Common modes Siemon Industrial MAX 6 Modules Recommended