Professional Documents
Culture Documents
Allow the use of any combination of Category 7/Class F or shielded MAX modules
Be made of .060” thick cold rolled steel in 24-port configuration available in black and
metallic colors
Allow the use of other multimedia outlets including optical fiber and coaxial
Must have an angled panel design to facilitate routing of patch cords into vertical wire
managers – eliminating the need for horizontal wire managers.
Have resilient ground tabs and ground lugs to assure that each outlet and cable is
properly grounded
Have port identification numbers silk-screened on the front of the panel
Accommodate 24 ports for each rack mount space (1RMS = 44.5 mm [1.75 in.])
Have built-in cable management and strain relief integrated onto the rear of the panel
Be provided with self-adhesive, clear label holders and white designation labels