Exceed category 6 component compliance from 1 to 250MHz with usable bandwidth
to 500MHz Be made of black anodized aluminum, in a 24 configuration Accommodate at least 24 ports for each rack mount space (1RMS = 44.5 mm [1.75 in.]) Be available with and without the Keystone style 10G 6A F/UTP modules. Have 310 style insulation displacement connectors with quadrant pair isolation and a Pyramid wire entry system Allow termination with a single conductor 110 style impact tool Feature robust “intellitab” sensor pads constructed with 30 micro-inches of gold over nickel. Have resilient ground tabs and ground lugs to assure that each outlet and cable is properly grounded Be backwards compatible to allow lower performing categories of cables or connecting hardware to operate to their full capacity Have rear protective strain relief caps which can be installed onto cable before or after termination Have versatile 110 style punch-down connections for termination of the analyzer I/O cables Support industry standards for T568A or T568B wiring options on each individual outlet Have modular ports compliant with FCC CFR 47 part 68 subpart F and IEC 60603-7 with 50 micro-inches of gold plating over nickel contacts Be fully enclosed front and rear for physical protection of printed circuit board Have a rear cable management bar for strain relief included with each panel Have individual port identification numbers permanently marked on both the front and rear of the panel Display category performance markings on front of panel Include adhesive circuit identification and color-coding designation strips with each panel Provide self adhesive, clear label holders and white designation labels with the panel, with optional color labels available Must be certified by Underwriters Laboratories to United States Standards and C22.2 Canadian Telecommunications Standards