Professional Documents
Culture Documents
MapIT - M-RIC-SC48-01
MapIT - M-RIC-SC48-01
Be available in black, and constructed of 0.08 thickness aluminum alloy with 18-
gauge steel cover.
Feature compact 2 RMS (89.0mm [3.50 in.]) design
Use duplex SC fiber adapters.
Panels to be pre-loaded with 568SC duplex adapters to support up to 48 strands of
fiber
Incorporate dual-level fiber managers to effectively store fiber cable slack in both the
front and rear of the enclosure.
Have integrated key-lockable front and rear transparent doors with single-finger
latches and spring release hinges for removal.
Accommodate up to four 24-port fusion or 12-port mechanical stackable splice trays.
Have a sliding tray that can slide out the front and rear of the enclosure and be
secured at multiple working positions as well as be fully removable for increased
access.
Have cable access points for fiber jumpers entering and exiting the unit with rotating
grommets to facilitate cable loading and to minimize micro bending stress.
Have anchor points for securing fiber cable(s) entering the unit.
Feature robust “intellitab” sensor pads constructed with 30 micro-inches of gold over
nickel.
Have versatile 110 style punch-down connections for termination of the analyzer I/O
cables
Have one intellitab sensor pad for each duplex adapter for connection to an intelligent
patching system.
Have labeling that can be viewed with doors open or closed and meets or exceeds
ANSI/TIA/EIA-606-A requirements and also be laser printable.
Be able to mount both 19-inch and 23-inch rack/cabinets.
Must be certified by Underwriters Laboratories to UL 1863 United States Standards
and C22.2 Canadian Telecommunications Standards.
Siemon MapIT 48 Port SC Rack Mount Interconnect Center Recommended