Professional Documents
Culture Documents
Approved by The All India Council for Technical Education (AICTE) - New Delhi;
Affiliated to Visvesvaraya Technological University (VTU), Belagavi;
Accredited by National Board of Accreditation (NBA) - New Delhi.
WORK BOOK
VISION
MISSION
Course outcomes:
After studying this course, students will be able to
Correlation:
PO1 PO2 PO3 PO4 PO5 PO6 PO7 PO8 PO9 PO10 PO11 PO12
CO1
CO2
CO3
CO4
CO5
:
Program Outcomes:
Apply knowledge of mathematics, science engineering fundamentals and an engineering specialization to the
PO1
solution of complex engineering problems.
Identify, formulate, research literature and analyze complex engineering problems reaching substantiated
PO2
conclusions using first principal of mathematics, natural sciences and engineering sciences.
Design solutions for complex engineering problems and design system components or process that meet specified
PO3 needs with appropriate consideration for public health and safety, cultural, societal and environmental
considerations.
Conduct investigation of complex problems using research based knowledge and research methods including
PO4 design of experiments, analysis and interpretation of data and synthesis of information to provide valid
conclusions.
Create select and apply appropriate techniques, resources and modern engineering and IT tools including
PO5
prediction and modelling to complex engineering activities with an understanding of the limitations
Apply reasoning informed by contextual knowledge to assess societal, safety, legal and cultural issues and the
PO6
consequent responsibilities relevant to professional engineering practice.
Understand the impact of professional engineering solutions in societal and environmental contexts and
PO7
demonstrate knowledge of and need for sustainable development
PO8 Apply ethical principal and commit to professional ethics and responsibilities and norms of engineering practice.
PO9 Function effectively as an individual, and as a member or leader in diverse teams and in multi-disciplinary settings.
Communicate effectively on complex engineering activities with the engineering community and with society at
PO10 large, such as being able to comprehend and write effective reports and design documentation, make effective
presentations and give and receive clear instructions
PO11
work, as a member and leader in a team, to manage Projects and in multidisciplinary environments.
Recognize the need for and have the preparation and ability to engage in independent and life-long learning in the
PO12
broadest context of technological changes.
Explore emerging technologies in the field of Electronics & Communication Engineering using the knowledge and
PSO1
skills gained.
Apply techniques in different domains to create innovative products and services in the Communication, VLSI,
PSO2 DSP, and Networking.
Work on various platforms as an individual/ team member to develop useful and safe Circuits, PCB, Power
PSO3 Management Systems and Automation for the society and nation.
ASSIGNMENT -1
Q.
Theory Questions CO PO
No
1. Write a short note on virtual ground concept of an op-amp CO1 PO1,PO2
PO3
3. A non-
output voltage, voltage gain, load current when the input voltage is 1.5 V.
4 Design an op-
Q.
Theory Questions CO PO
No
1. CO5 PO1
2. Explain the half adder circuit and full adder circuit and implement using basic, NAND and
NOR only...
3. Explain with a neat block diagram of cellular telephonic unit
5 Show that
ASSIGNMENT 3
Q.
No
Theory Questions CO PO
Explain the operation of p-n junction diode under forward and reverse biased condition with CO1,CO2, PO1,PO2,PO3,
VI characteristics curve. Also explain the diode equation. PO5
1.
What is a zener diode? Explain with neat circuit diagram; explain the operation of a voltage
regulator with and without load.
3.
Define Rectifier. Sketch a centre tapped full wave rectifier and explain its operation. Also
derive the following.
4
(i) Average Voltage (ii) Efficiency (iii) Ripple factor.
With a neat diagram and waveforms explain the working of a Bridge wave rectifier.
5
=
0.7V.
(i) If the diodes employed are of silicon, what is the dc voltage across the
6 load?
(ii) Determine the PIV rating of each diode
(iii)Determine the maximum current that each diode conducts and the diode power
rating.
A silicon diode has for a forward bias of 0.6 V.
7
A half wave rectifier is fed from a supply of 230V, 50Hz with step down transformer of
8 transf
and ripple factor.
10 Write short notes on (i) Photo Diode (ii) LED (iii) Photo coupler
ASSIGNMENT 4
Q.
Theory Questions CO PO
No
1. With a neat circuit diagram explain how transistor is used as voltage CO1,CO2, PO1, PO2
amplifier CO4 PO3 PO5
2. Explain how transistor is used as switch PO9 PO10
3. Explain how transistor is used as
(i) Switch to ON/OFF an LED
(ii) Switch to ON/OFF a lamp in a power circuit using a relay
4 Explain in brief different types of feedback topologies
5 Draw and explain the operation of a voltage series feedback amplifier and Derive
an expression for its gain and input impedance output Impedance.
6
7 Describe the operation of RC Phase shift oscillator and Wien Bridge
Oscillator
8 Describe the operation of Wien Bridge Oscillator
9 Explain the internal block diagram of IC 555 timer
10 Explain the working of an Astable oscillator constructed using IC 555 timer.
ASSIGNMENT 5
Q.
Theory Questions CO PO
No
1. Explain the characteristics of N-channel JFET. CO1,CO3 PO1, PO2
PO3 PO5
2. What is MOSFET? Explain D- MOSFET and E- MOSFET transfer characteristics.
PO9 PO10
3. Draw and explain the operations of SCR using 2-transistor equivalent circuit.
Draw and explain the V-I characteristics of SCR.
4 Explain phase controlled application of SCR.
5 Explain the operation of a CMOS inverter.