Professional Documents
Culture Documents
3m Electrical PDF
3m Electrical PDF
2010
PowerIndustry
Solutions
Contents Contents
3M™
Separable Connectors 3M™Scotchflex
Cable Ties
14 36
3M™Heat Shrink 3M ™
Scotchlok
Electrical Spring Connectors
20 40
3M™Scotchcast™ 3M™ConstantSprings
Force
Resin Joint Kits
26 42
Our manufacturing facilities are ISO 9002 certified and our sites locations are ISO 9001 certified. Moreover, all our products
Scotch, Post-it, Scotchgard, Thinsulate, Scotch-Brite, Filtrete, Command and Vikuiti are trademarks of 3M. are independently tested to the major industry standards.
4 5
3M™ Cold Shrink
3M™ Cold Shrink
Medium Voltage Joints & Terminations
No Heat No High
No Flames Installation Cost
No Special Tools No Special Training
Splice bodies 100%
factory tested -
ensures reliability
Capacitive
Stress Relief No Shoving No Pushing on
e
ic
Sil
Hyd r of 3M
Unique inner ophobic behaviour
electrode design
Expanded silicone rubber on removable plastic core. Unsurpassed Reliability. 3M TM Cold Shrink technology has been proven
3M™ Cold Shrink technology utilizes an expanded silicone over the last 35 years. Silicone body delivers excellent electrical performance.
rubber material on removable plastic core. The core is removed Splice bodies are 100% factory tested. 3M TM Cold Shrink technology deliver
by simply unwiding. s increased radial interface pressure for improved long term reliability. 3M TM
Cold Shrink TM technology is field proven by major Middle East Power utilities.
Connector
Compact Design. Because of superior material used in 3M™ Unique 3M™ Cold Shrink™
delivery system requires no
Silicone insulation
Cold Shrink™ terminations, tails lengths may be reduced and Simplified Installation. 3M TM Cold Shrink TM technology utilises a one piece pushing, heat or flame
less space is required. splice body for splicing cable from 6,6-36kv. Taping of phases in terminations
has been eliminated by the use of a one piece 3M TM Cold Shrink silicone
Silicone body Accomodates a wide range of sizes. Because the expanded rubber tube which includes stress control, 3M Quick Term II technology.
provides excellent
electrical properties silicone material technology, one kit fits a wide range of cable
sizes, resulting in reduced inventory. Forget Heat, flames or shoving. 3M TM Cold Shrink technology is based on
Outer semicon layer
a removable plastic core. There is no need for gas cylinders or torches – simply
Superior silicone material. Silicone has unique properties unwind the core. Skirted Silicone Insulator
as an insulator. Its smooth surface ensures that the minimum
One piece design
amount of contamination adheres to the surface. It is also
inorganic and hydrophobic, (water beads form and run off).
Capacitative
stress relief
3M silicone materials has these unique benefits for outdoor Silicone Insulator with built in
Stress Control Tube
termination applications.
™
3M Cold Shrink Cable Accessories 3M™ Cold Shrink™ silicone
cable breakout boot
Earth Braid
6 7
3M™ Cold Shrink
3M™ Cold Shrink Termination Kits ( For XLPE, Screened Armoured Cables )
3M ™
185 – 300 mm2 93-EB 64-2 META
400 - 800 mm2 93-EB 65-2 META
20kV
Cold Shrink
3 Indoor 25 – 70 mm2 93-EB 62-3 META
95 – 240 mm2 93-EB 63-3 META
300 – 400 mm2 93-EB 64-3 META
3 Outdoor 25 – 70 mm2 93-EB 62-4 META
8 9
3M™ Cold Shrink
3M™ Barrier Boot System 92-EE717-1 Cold Shrink Joint System
The 3M Barrier Boot System 92EE717-1 consists of a one piece EPDM rubber body Improve reliability, reduce time, labour, and overall cost with our wide
suitable for operating wet indoors under conditions of ambient temperature and range of one-piece joint bodies. Fits cable sizes from 50mm2 up to
loading. The barrier boot is designed to accommodate bushings of cast resin or 1000mm2 (11kV up to 36kV).
porcelain type with diameters between 40.0-70.0mm and is intended for Coldshrink
VOLTAGE NO. CORES CABLE SIZE 3M KIT
terminations of power cables up to 15kV with extruded insulation from 50 up to
300mm2. Voltage rating maximum 8.7/15(17.5)kV. Suitable for both straight and 1 50 -150 mm2 92-AS 610-1 ME
right angled applications. 120 -400 mm2 92-AS 620-1 ME
500 - 1000 mm2 92-AS 630-1 ME
11kV
3 50 - 150 mm2 92-AS 610-3 ME
120 - 300 mm2 92-AS 620-3 ME
10 11
3M™ Cold Shrink
3M™ Cold Shrink
High Voltage Joints & Terminations
12 13
3M™ Separable Connectors
3M Separable Connectors
™ Straight Connector 250A
Kit Ref
93-EE 600-2/25
Application Range
CSA (mm2)
25
Diameter over
Primary Insulation
(mm)
12.7 - 15.2
Separable Straight Connectors
The 92-EE 600-2 kits consist of a straight type Separable Connector.
The assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install
one Separable Connector, including all connection devices.
93-EE 600-2/35 35 13.8 - 16.3
Applications
93-EE 600-2/50 50 15.0 - 17.5 The 92-EE 600-2 kits consist of a straight type Separable Connector.
The assembly is fully screened and has an integrated stress control
93-EE 600-2/70 70 16.7 - 19.2 element. Each kit contains all the necessary components to install
3M produce a range of silicone rubber Seperable elbow, straight and T connector one Separable Connector, including all connection devices.
kits. The assembly is fully screened and has an integrated stress control element. 93-EE 600-2/95 95 18.3 - 20.8
Each kit contains all the necessary components to install one Seperable Connector, 93-EE 600-2/120 120 19.8 - 22.8
including all connection devices.
93-EE 600-2/150 150 21.3 - 24.3
T Connector 630A
Kit Ref Application Range Diameter over Separable T-Connectors
CSA (mm2) Primary Insulation The 93-EE 7x5-6 kits consist of a T-type Separable Connector. The
(mm) assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install
93-EE 705-6/-95 50 - 95 15.0 - 32.6 one Plug-In, including all connection devices.
93-EE 705-6/-240 95 - 240 15.0 - 32.6
Applications
93-EE 715-6/300 300 26.3 - 30.4 These kits are designed to be installed on wire screened non-armoured
polymeric insulated cables for 6/10kV (Um = 12kV) up to 12/20kV
93-EE 715-6/400 400 30.2 - 34.6 (Um = 24kV) – 400A / 630A applications. The Separable Connector
establishes the connection between any polymeric insulated cable
onto transformers, switchgears, motors or other equipment.
14 15
3M™ Separable Connectors
Separable Connectors (plug-in)- Rated 12/20 (24kV) Separable Connectors (plug-in)- Rated 18/30 (36kV)
Elbow Connector 250A Elbow Connector 400A
Kit Ref Application Range Diameter over Elbow Connectors Kit Ref Application Range Diameter over Elbow Connectors
CSA (mm2) Primary Insulation The 93-EE 605-2 kits and the 93-EE 605-4 consist of an elbow CSA (mm2) Primary Insulation The 94-EE 605-4 kits consist of an elbow type Separable Connector.
(mm) type Separable Connector. The assembly is fully screened and (mm) The assembly is fully screened and has an integrated stress control
has an integrated stress control element. Each kit contains all the element. Each kit contains all the necessary components to install
93-EE 605-2/-95 25 - 95 17.2 - 25.0 necessary components to install one Separable Connector, including 94-EE 605-4/35 35 22.8 - 25.5 one Separable Connector, including all connection devices.
all connection devices. 94-EE 605-4/50 50 23.5 - 26.7
93-EE 615-2/120 120 24.0 - 27.0 Applications
Applications 94-EE 605-4/70 70 25.1 - 28.4 These kits are designed to be installed on wire screened nonarmoured
93-EE 615-2/150 150 25.5 - 28.5 These kits are designed to be installed on wire screened nonarmoured polymeric insulated cables up to 18/30kV (Um = 36kV) - 400A
polymeric insulated cables for 6/10kv (Um = 12kV) up to 94-EE 605-4/95 95 26.7 - 30.0 applications. The Separable Connector establishes the connection
12/20kV (Um = 24kV) - 400 Applications. The Separable Connector 94-EE 605-4/120 120 28.3 - 32.0 between any polymeric insulated cable onto transformers,
Elbow Connector 400A establishes the connection between any polymeric insulated cable switchgears, motors or other equipment.
onto transformers, switchgears, motors or other equipment. 94-EE 605-4/150 150 29.9 - 33.5
Kit Ref Application Range Diameter over
CSA (mm2) Primary Insulation 94-EE 605-4/185 185 31.5 - 35.1
(mm) 94-EE 605-4/240 240 33.4 - 37.6
93-EE 605-4/-95 25 - 95 15.0 - 32.6 94-EE 605-4/300 300 35.6 - 39.6
93-EE 605-4/-240 95 - 240 15.0 - 32.6
T Connector 630A
Kit Ref Application Range Diameter over T-Connectors
CSA (mm2) Primary Insulation The 94-EE 705-6/x kits consist of a T-type Separable Connector.
Straight Connector 250A (mm) The assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install
Kit Ref Application Range Diameter over Straight Connectors 94-EE 705-6/70 70 25.1 - 28.4 one Plug-In, including all connection devices.
CSA (mm2) Primary Insulation The 93-EE 600-2 kits consist of a straight type Separable Connector.
(mm) The assembly is fully screened and has an integrated stress control 94-EE 705-6/95 95 26.7 - 30.0
Applications
element. Each kit contains all the necessary components to install These kits are designed to be installed on wire screened
93-EE 600-2/25 25 17.0 - 19.5 94-EE 705-6/120 120 28.3 - 32.0
one Separable Connector, including all connection devices. nonarmoured polymeric insulated cables for 18/30 (Um = 36kV)
93-EE 600-2/35 35 18.0 - 20.5 94-EE 705-6/150 150 29.9 - 33.5 400A/ 630A applications. The Separable Connector establishes the
Applications connection between any polymeric insulated cable onto transformers,
93-EE 600-2/50 50 19.2 - 21.7 These kits are designed to be installed on wire screened non-armoured 94-EE 705-6/185 185 31.5 - 35.1
switchgears, motors or other equipment.
polymeric insulated cables up to 6/10kV (Um = 12kV) up to 12/20kV
93-EE 600-2/70 70 20.9 - 23.4 94-EE 705-6/240 240 33.4 - 37.6
(Um = 24kV) – 400A / 630A applications. The Separable Connector
establishes the connection between any polymeric insulated cable 94-EE 705-6/300 300 35.6 - 39.6
93-EE 600-2/95 95 22.5 - 25.0
onto transformers, switchgears, motors or other equipment.
93-EE 600-2/120 120 24.0 - 27.0 Accessories for Separable Connectors
Name 3M Type Description Usable for
93-EE 600-2/150 150 25.5 - 28.5 Coupling pieces KU 21 250A separable connectors 9x-EE 600-2/x
Coupling pieces KU 23.2 Silicone coupling pieces to connect T-plugs T- Plug 93-EE 705-6x
Coupling pieces KU 33 Silicone coupling pieces to connect T- plugs T-Plugs 300 and 400mm2
Earthing accessories ER 23 for plug in terminations disconnected from the switchgear T-Plugs
T Connector 630A
Test adapter PR 23.1 T-shaped test bushing T- Plugs
Kit Ref Application Range Diameter over T-Connectors Post insulator STF 21 To connect XLPE-cables to bushings with a 250A bushing
CSA (mm2) Primary Insulation using conventional terminations 250A bushings interface type A
The 93-EE 705-6/x2 kits consist of a T-type Separable Connector.
(mm) Surge-proof terminating caps SP 21 Terminating caps size A
The assembly is fully screened and has an integrated stress control
element. Each kit contains all the necessary components to install Surge-proof terminating caps SP 33 Terminating caps size C
93-EE 705-6/-95 50 - 95 15.0 - 32.6 one Plug-In, including all connection devices. Surge arrester MUT 23 (12kV) Surge arrester Uc = 12kV T- Plug 93-EE 705-6x
Surge arrester MUT 23 (22kV) Surge arrester Uc = 22kV T- Plug 93-EE 705-6x
93-EE 705-6/-240 95 - 240 15.0 - 32.6
Applications Surge arrester MUT 23 (24kV) Surge arrester Uc = 24kV T- Plug 93-EE 705-6x
93-EE 715-6/300 300 30.2 - 34.6 These kits are designed to be installed on wire screened non-armoured Surge arrester MUT 33 (30 kV) Surge arrester Uc = 30kV 705-6x (KU33 needed)
polymeric insulated cables up to 6/10kV (Um = 12kV) up to 12/20kV Surge arrester MUT 33 (15 kV) Surge arrester Uc = 15kV 705-6x (KU33 needed)
93-EE 715-6/400 400 33.5 - 37.8 (Um = 24kV) – 400A / 630A applications. The Separable Connector T-Plug with metal housing 93-EM 705-6/-95 10 up to 20kV T-Plug 25-95mm2 Based on 93-EE 705-6/-95
establishes the connection between any polymeric insulated cable T-Plug with metal housing 93-EM 705-6/-240 10 up to 20kV T-Plug 95-240mm2 Based on 93-EE 705-6/-240
onto transformers, switchgears, motors or other equipment. Elbow with metal housing 93-EM 605-2/-95 10 up to 20kV Elbow 25-95mm2 Based on 93-EE 605-2/-95
16 17
End Caps & Cable Abandonement Kits
Applications
• Cable protection from exposure to moisture
3M ™
EC-3 26.0 - 49.2
Cold Shrink
EC-4 45.5 - 84.3
A complete kit with all the components required to abandon cables either temporarily or permanently. Provides environmental seal and mechanical
protection, eliminates the requirements for heat during installation using 3M Cold Shrink technology.
3M Cold Shrink End Caps environmentally seal and mechanically protect exposed Each kit includes Cold Shrink End Cap, Cold Shrink Pre Stretched Tube, Armour continuity, tapes, and full instructions.
cable ends using no tools, mastics or tapes. They are close-ended, tubular rubber
sleeves that are factory expanded and loaded onto a removable core. When ACCEPTED KIT REFERENCE
positioned over the end of a cable, or other cylindrical object, the core is removed CABLE
to provide a reliable seal that protects your cable ends from environmental damage. DIAMETER
(I.e. moisture, contamination, corrosion, ozone, ultra-violet and radiation).. (mm)
12 -18 CSCAK/1
18 - 25 CSCAK/2
25 - 42 CSCAK/3
42 - 55 CSCAK/4
56 - 81 CSCAK/5
18 19
3M™ Heat Shrink
Applicable Specification
• MIL-DTL-23053/5
• Class 1,2;
• AMS – 3636
• AMS – 3637
• UL File E-39100
• E-69751
• CSALR38227
3M ™
• ABS
20 21
3M™ Heat Shrink
3M™ GTI 3000 - General Purpose 3M™ HDT - A - Adhesive Lined Heavy Duty Polyolefin
Bore Supplied min/ Bore Recovery Max
Thin Wall Insulation Polyolefin HDT-A is thick wall polyolefin tubing. The toughness and weather ability of the tubing make
GTI 3000 is flexible, thin walled heat shrink tubing, made of cross-linked, halogen free it well suited for exposed applications. HDT-A is supplied with a specially designed hot melt
1.5mm 0.5mm
polyolefin. The tubing meets the latest requirements regarding shrinking time, flexibility, and adhesive layer. The adhesive is applied during extrusion of the tubing thus achieving a very
3.0mm 1.0mm material characteristics. smooth, constant adhesive layer, which ensures excellent sealing properties. Shrink ratio: Up
to 4 : 1
9.0mm 3.0mm
GTI 3000 is designed to provide excellent insulation and protection in various industrial
18.0mm 6.0mm applications. The large diameter range, and 3:1 shrink ratio offers many solutions within a HDT-A meets the longitudi nal sealing requirements of VDE 0278 part 3 and is, therefore, ideal
small range of products. GTI 3000 is available in a wide range of colours, with a shiny, smooth, for sealing underground or exposed inline joints and terminations.
39.0mm 12.7mm
particle free surface. Suitable for cable marking and identification applications. Continuous
operating temperature -55°C to 135°C. Supplied in 1 metre pieces. Supplied in 1 metre pieces. Continuous operating temperature range: -55°C to 130°C, outer
wall only. Available in black.
GTI 3000 fulfills the strict requirements of many standards, including RoHS. Available in the
following colours: Black, White, Blue, Brown, Red, Clear, Yellow, Green/Yellow* Bore Supplied min / Bore Recovery Max
* Size 1.5 / 0.5 not available in Green / Yellow
12mm 3mm
19mm 6mm
30mm 8mm
3M™ GTI - General Purpose Thin Wall Insulation Polyolefin
3M GTI is flexible thin walled polyolefin tubing, with fast shrink time and excellent electrical and 38mm 12mm
mechanical properties. 48mm 15mm
GTI is designed to provide excellent insulation and protection in various industrial applications. 85mm 26mm
Bore Supplied min/ Bore Recovery Max 115mm 38mm
Continuous operating temperature -55°C to 135°C with a 2:1 Shrink Ratio. Supplied in 1 metre
pieces. Available in the following colour & size combinations to complement the GTI-3000
51mm 25.4mm
Range; Black, White, Blue, Brown, Red, Clear, Yellow Low Voltage (up to 1kV)
76mm 38mm
91-AH (A) Series for Crimp Connectors
102mm 51mm Application
91-AH (A) Series has been developed to offer an easy method for jointing low voltage polymeric
insulated cables thus ensuring a moisture sealed connection. The kit consists of the appropriate
3M™ MDT - A - Adhesive Lined Medium Duty Polyolefin inner tubes, other tubes and a user-friendly installation drawing. Kits suitable for shielded and
MDT-A is specially designed medium wall tubing, which provides tough and flexible insulation armoured cables also include constant force springs and a copper sleeve for armour continuity.
and is ideal for the protection of cable joints and terminations. MDT-A is lined with a specially Kits are designed for a wide range of cable cross-sections optimizing stock holding. The
designed adhesive, which is applied during the tubing’s extrusion process. This achieves a 91-AH(A) Series can be used with all common crimp connectors and also for splicing with
very smooth adhesive layer, which ensures excellent sealing properties. MDT-A meets the phase crossing.
requirements of VDE 0278 part 3.
Technical Features
A non-adhesive version is available (MDT), please contact customer service for details The 91-AH(A) Kits are made from cross linked polyolefin tubing, which is internally coated
The adhesive lining makes it especially suitable for underground cable joint applications. For • Quick and easy installation with hot melt adhesive. As the adhesive melts and the sleeve shrinks, a perfect waterlight seal
Offshore and Naval applications, a modified MDT-A approved by Det Norske Veritas is available • Kits designed to accommodate a wide is formed. Each kit contains all the necessary tubings and an appropriate instruction sheet
(MDT-A-F471). range of cross sections up to 300mm2 outlining the different steps of jointing installation. The outer sleeve is manufactured from heavy
• Excellent moisture sealing duty, thick wall, flame retardant tubing.
Bore Supplied min/ Bore Recovery Max • Flame retardant tubing
Supplied in 1 metre pieces. Continuous operating temperature range: -35°C to 130°C, outdoor (Cross section Non Shielded/ (Cross section
wall only.Available in black - Shrink ratio is up to 4.5: 1 • Kits available for both 4 and 5 core
12mm 3mm in mm2) Shielded Armoured in mm2)
cables Cable Cable
19mm 6mm • Kits also available for shielded and
armoured cables 5 x 1.5 to 5 x 6 91 –AH-20-5S - -
27mm 8mm
5 x 6 to 5 x 16 91-AH-21-5S - -
32mm 7.5mm
4 x 6 to 4 x 25* 91-AH-21-S* 91-AHA-21-S 4 x 6 to 4 x 16
38mm 12mm
4 x 35 to 4 x 50 91-AH-22-S* 91-AHA-22-S 4 x 25 to 4 x 35
50mm 18mm
4 x 70 to 4 x 95* 91-AH-23-S* 91-AHA-23-S 4 x 50 to 4 x 70
70mm 26mm
4 x 95 to 4 x 150 91-AH-24-S 91-AHA-24-S 4 x 95 to 4 x 150
90mm 36mm
4 x 185 to 4 x 300* 91-AH-25-S* 91-AHA-25-S 4 x 185 to 4 x 240
120mm 40mm
*The majority of cable cross-sections can be covered with these 3 kits
22 23
3M™ Heat Shrink
H K H K S P± R± HW± W±
Cable Expanded Recovered Part Length Minimum (Min) (Min) (Max) (Max) (Nom) 10% 10% 20% 20% (Mm2)
mm mm mm mm mm mm mm mm mm
Diameter Inner Inner Number (mm) Recovered
Max/Min Diameter Diameter Wall SKE - 2F/1 30.0 15.0 9.4 4.1 20.0 94.0 30.0 1.5 1.2 4-35
(mm) (mm) (mm) Thickness
(mm)
3M™ SKE 3F / 3 Way Outlet Sleeve Breakouts
35 / 10 50 8 HDCW 35/10-250 250 2.0
Expanded Recovered Recovered Conductor
HDCW 35/10-500 500 Diameter Diameter Dimensions Size
HDCW 35/10-750 750 (as supplied) (fully shrunk) Range
HDCW 35/10-1000 1000
H K H K S P± R± HW± W±
HDCW 35/10-1200 1200
Part No. (Min) (Min) (Max) (Max) (Nom) 10% 10% 20% 20% (Mm2)
55 / 15 75 13 HDCW 55/15-250 250 2.0 mm mm mm mm mm mm mm mm mm
HDCW 55/15-500 500
SKE-3F/1=1.5 25.0 9.0 9.0 3.0 16.0 68.0 18.0 2.5 2.0 4-16
HDCW 55/15-750 750 SKE-3F/2 31.0 15.0 18.0 5.0 23.0 89.0 24.0 2.5 2.3 16-35
HDCW 55/15-1000 1000 SKE-3F/4 55.8 30.4 22.5 9.0 37.0 180.0 44.0 2.0 2.0 50-150
SKE-3F/5 72.0 37.0 35.0 17.5 55.0 178.0 38.0 4.0 3.0 185-300
HDCW 55/15-1200 1200
80 / 25 100 23 HDCW 80/25-250 250 2.0 3M™ SKE 4F / 4 Way Outlet Sleeve Breakouts
HDCW 80/25-500 500 Expanded Recovered Recovered Conductor
HDCW 80/25-750 750 Diameter Diameter Dimensions Size
(as supplied) (fully shrunk) Range
HDCW 80/25-1000 1000
HDCW 80/15-1200 1200 H K H K S P± R± HW± W±
110 / 30 132 25 HDCW 110/30-250 250 2.0 Part No. (Min) (Min) (Max) (Max) (Nom) 10% 10% 20% 20% (Mm2)
mm mm mm mm mm mm mm mm mm
HDCW 110/30-500 500
HDCW 110/30-750 750 SKE-4F/1+2 35.0 15.0 12.0 3.0 22.0 95.0 24.0 2.5 2.0 4-35
SKE-4F/3+4 47.4 21.5 22.9 6.4 38.1 202.0 38.1 4.1 3.3 35-95
HDCW 110/30-1000 1000
HDCW 110/30-1200 1200 3M™ SKE 4F / 5
140 / 40 145 32 HDCW 140/40-250 250 1.8
Expanded Recovered Conductor
HDCW 140/40-500 500 Diameter Dimensions Size
HDCW 140/40-750 750 (as supplied) (fully shrunk) Range
HDCW 140/40-1000 1000
H K S H K S P± R± HW± W±
HDCW 140/40-1200 1200 Part No. (Min) (Min) (Nom) (Max) (Area Max) (Nom) 10% 10% 20% 20% (Mm2)
mm mm mm mm mm mm mm mm mm mm
SKE-4F/5 78.7 38.1 76.2 35.6 129.0 50.8 205.0 38.1 3.8 3.3 120-300
24 25
3M™ Scotchcast Resin
Features
• Utilizes a “bulge“ type mould
• Features Scotchcast™ 460M polyurethane resin
• Meets VDE 0278, BS 6910
Benefits
• 90A series are ideal for armoured cables
• Tough and moisture-proof
• Long lasting physical and electrical protection
• All kits include tape for insulating ferrules and sealing mould ends
• Tried and tested for over 30 years
• 3M worldwide quality guarantee
Selection Chart
3M ™ Product Min. Cable O.D. Max. Cable O.D. Max. Cross Section Range (mm²)
Scotchcast™
Non-Armoured Cable Armoured Cable
Scotchcast™ 90A-01 8 mm 28 mm 3 x 16 4 x 16 3 x 10 4 x 10
Scotchcast™ 90A-02 14 mm 32 mm 3 x 35 4 x 25 3 x 16 4 x 16
Scotchcast™ 90A-04
23 mm
28 mm
39 mm
51 mm
3 x 50
3 x 95
4 x 50
4 x 95
3 x 50
3 x 95
4 x 35
4 x 70
Scotchcast™ 90A-05 30 mm 55 mm
3M™ resin insulated splicing kits are designed for indoor, outdoor (weather exposed), Scotchcast™ 90A-06 45 mm 70 mm
direct buried or submersed applications. 3M brand Scotchcast™ Resins are 100%
Scotchcast™ 90A-07 48 mm 86 mm
solids, electrical grade, hydrolytically stable insulating resins. Their unique electrical
and physical properties make them ideal for insulating and protecting electrical/
electronic pars and assemblies. Their physical features also make them suitable for
non-electrical, general use applications, for example as adhesives or sealants.
26 27
3M™ Scotchcast Resin
Low Voltage Range
The new body design is based on a completely new hinged, one-part joint body that
allows resin to be sealed inside the mould without the use of mastic and tape - it does
this by using an expanding foam seal.
New 3M Series Old Series Application Range Bag Size in ml
INLINE KITS
92-NBA0 4X 1.5 4 1x 90
92-NBA1 4X 1.5 10 1x 135
92-NBA2 4X 6 16 1x 200
92-NBA3 92 A Series 4X 16 25 1x 370
92-NBA4 4X 25 50 1x 680
92-NBA5 4X 50 95 1x 1375
92-NBA6 4X 70 150 2x 1375
92-NBA7 4X 120 240 3x 2200
92-NBA0-U 4X 1.5 4 1x 90
92-NBA1-U 4X 1.5 10 1x 135
92-NBA2-U 4X 6 16 1x 200
92-NBA3-U 92 AU Series 4X 16 25 1x 370 Resin Systems Selection Chart
(Hazardous areas e.g.
92-NBA4-U petrochemical sites) 4X 25 50 1x 680 The new Scotchcast resin, fully compliant with EU legislation, has
92-NBA5-U 4X 50 95 1x 1375 hydrophobic property which makes it perfect for a use in presence of
92-NBA6-U 4X 70 150 2x 1375 water and proposed in bag with a pouring nozzle, which represents, one
92-NBA7-U 4X 120 240 3x 2200 step less in the preparation process.
92-NBA0 4X 1.5 4 1x 90
92-NBA0 4X 1.5 4 1x 90 New 3M REF Old Series Nozzle Product Descrption
92-NBA1 82 A Series 4X 1.5 10 1x 135 Yes Size C 426G (370ml)
92-NBA1 4X 1.5 10 1x 135
92-NBA4 4X 25 50 1x 680 Yes Size B 230G (200ml)
No. 4 Yes Size A 100G ( 90ml)
Branch Branch No. 40* No. 1471
New 3M Series Old Series Core Main Min Main Max Min Max
No. 47 No Bulk Size B 230G (200ml)
BRANCH KITS
No Bulk Size C 426G (370ml)
92-NBC1 4X/5X 2,5/1,5 16/10 2,5/1,5 16/10
92-NBC1 91-C Series 4X/5X 2,5/1,5 16/10 2,5/1,5 16/10 No Bulk Size C 426G (370ml)
92-NBC2 4X/5X 4/4 35/25 2,5/4 25/25
92-NBC2 4X/5X 4/4 35/25 2,5/4 25/25
Yes FR W Size C 426G (370ml)
No. 1402* No. 1400 U
92-NBB1 4X/5X 2,5/1,5 16/10 2,5/1,5 16/10
Yes FR W Size B 230G (200ml)
92-NBB1 4X/5X 2,5/1,5 16/10 2,5/1,5 16/10
92-NBB1 92-B Series 4X/5X 2,5/1,5 16/10 2,5/1,5 16/10
92-NBB2 4X/5X 4/4 35/25 2,5/4 25/25
92-NBB1 4X/5X 2,5/1,5 16/10 2,5/1,5 16/10
92-NBB2 4X/5X 4/4 35/25 2,5/4 25/25
3M REF RESIN TYPE SIZE DESCRIPTION
92-NBB1-U 4X/5X 2,5/1,5 16/10 2,5/1,5 16/10
92-BU Series
92-NBB2-U 4X/5X 4/4 35/25 2,5/4 25/25
No. 2123 Polyurethane Size C - 12.3 oz Re-entrable compound,
BRANCH / DOUBLE BRANCH / INLINE JOINTS Size D - 21.2 oz Low viscosityflows well at low temperatures,
92-AB 111 4X 1.5 6 1.5 4 Excellent wetting properties
92-AB 112 4X 6 10 4 10
92-AB 113 4X 16 25 10 16
91-AB Series No. 2130 Polyurethane Size B - 216 g Flexible resin used in areas where the mould is
92-AB 114 4X 35 70 35 50
92-AB 115 4X 95 150 70 120 Size C - 616 g removed i.e for flexible splicing
92-AB 116 4X 120 185 95 150
92-AB 117 4X 150 240 150 240 *closed mix and pour system
28 29
Electrical Tapes
Scotch® Heavy Thick, heavy duty vinyl protects cable and 8.5 mil 105°C 3/4’’ x 66’ (19 mm x 20,1 m)
Duty Grade Vinyl provides faster build-up. Insulates splices 221°F 3/4’’ x 44’ (19 mm x 13,4 m)
Electrical Tape up to 600V. Repairs cable jacketing. 3/4” x 36 yd (19 mm x 32,9 m)
Super 88* Resists UV rays, abrasion, corrosion, 1” x 36 yd (25,4 mm x 32,9 m)
alkalies and acids. Flame retardant. 1-1/2” x 36 yd (38 mm x 32,9 m)
UL Listed and CSA Certified. 1-1/2” x 44’ (38 mm x 13,4 m)
2” x 36 yd (51 mm x 32,9 m)
Scotch® 9 fade-resistant colors identify and mark 7 mil 105°C 3/4’’ x 60’ (19 mm x 18,2 m)
Professional Grade phases/cables. Insulate splices up to 221°F 1/2’’ x 20’ (12 mm x 6,1 m)
Color Coding Vinyl 600V. Repair cable jacketing. Resists 3/4” x 66’ (19 mm x 20,1 m)
Electrical Tape 35* UV rays, abrasion, corrosion, alkalies and 1/2” x 20’ (12 mm x 6,1 m)
acids. Flame retardant. UL Listed and
CSA Certified.
Scotch® Extra Extra-thick, heavy duty vinyl protects 10 mil 80°C 1/2” x 36 yd (13 mm x32,9 m)
Heavy Duty Grade cable and provides faster build-up. 176°Fl 3/4” x 36 yd (19 mm x 32,9 m)
Vinyl Electrical Tape Insulates splices up to 600V. Repairs 1” x 36 yd (25,4 mm x 32,9 m)
22* cable jacketing. Resists UV rays, 1-1/2” x 36 yd (38 mm x 32,9 m)
abrasion, corrosion, alkalies and acids. 2” x 36 yd (51 mm x 32,9 m)
Flame retardant. UL Listed and CSA
Certified.
3M™ Highland™ Bundles cable and pull wire. Insulate 7 mil 90°C 3/4” x 60’ (19 mm x 20,1 m)
Medium Grade Vinyl splices up to 600V. Flame retardant. 194°F 3/4” x 66’ (19 mm x 20,1 m)
Electrical Tape* UL Listed and CSA Certified.
3M™ Temflex™ Insulate & repair mining cable jacketing. 7 mil 80°C 3/4” x 66’ (19 mm x 20,1 m)
3M™ Economical Tape, available in Black, Red, Blue, 5 mil 80°C 3/4” x 8 YDS (14mmx 7.31m)
General Purpose Brown, Yellow, White, Green, Orange, 3/4” x YDS (19mmx9.14m)
PVC Grey for colour coding on wires and 3/4” x 20 YDS (19mmx6,0m)
cables 0.15mm thickness Elongation 3/4” x 66 YDS (19mmx20.1m)
125%
Get your hands on 3M Tape!
Rubber Electrical Tapes Product Description/ Tape Temp Roll Size
3M now offers new and experienced electricians a chance to sharpen their skills Applications Thickness Range
with the complete 3M tape training kit (80-6114-2896-4). The kit contains all the Scotch® Insulate and splice solid dielectric 30 mil continuous: 1” x 30’ (25 mm x 9,1 m)
tools needed for the following applications: Professional Grade cables through 69kV. Linerless, high- 90°C / 194°F 3/4” x 30’ (19 mm x 9,1 m)
Linerless Rubber voltage insulating, thermally conductive, short-term: 1-1/2” x 30’ (38 mm x 9,1 m)
Splicing Tape 130C* self-bonding rubber. 130°C / 266°F 2” x 30’ (50 mm x 9,1 m)
1” x 10’ (25 mm x 3,05 m)
• Insulating & wrapping a split bolt 1” x 15’ (25 mm x 4,6 m)
• Insulating & wrapping a motor lead connection
Scotch® Insulate and splice solid dielectric cables 30 mil continuous: 3/4” x 30’ (19 mm x 9,1 m)
• Insulating & wrapping an inline splice Professional Grade through 69kV. Linered, insulating, 90°C /194°F 1” x 20’ (19 mm x 25 m)
• Insulating & wrapping a bus bar Linered Rubber thermally conductive, self-bonding short term: 1” x 30’ (25 mm x 9,1 m)
Splicing Tape 23 rubber. 130°C / 266°F 1-1/2” x 30’ (38 mm x 9,1 m)
2” x 30’ (50 mm x 9,1 m)
Scotch® Medium Splice and insulate cables and 30 mil continuous: 3/4” x 15’ (19 mm x 4,57 m)
Grade Linerless connections. General purpose, linerless 90°C / 194°F 1-1/2” x 15’ (38 mm x 4,57 m)
Rubber Splicing rubber insulating tape. short-term: 2” x 15’ ( 51 mm x 4,6 m)
Compound 2242* 130°C / 266°F
30 31
Electrical Tapes
Rubber Electrical Tapes Product Description/ Tape Temp Roll Size
Applications Thickness Range
3M™ Temflex™ Economical, low-voltage, linered rubber 30 mil 80°C 3/4” x 22’ (19 mm x 6,7 m) Corrosion Product Description/ Tape Temp Roll Size
Linered Rubber insulating tape. Up to 600 volts. 176°F 1-1/2” x 22’ (38 mm x 6,7 m) Protection Tapes Applications Thickness Range
Splicing Tape 2150
3/4” x 15’ (19 mm x 4,5 m) 3M™ Temflex™ General purpose corrosion tape. 10 mil 80°C 2” x 100’ (51 mm x 30, 5 m)
Scotch® Rubber tape, semi-conductive. 30 mil continuous: Economy Grade 176°F
Professional Grade Compatible with cable semi-conducting 90°C /194°F 1-1/2 x 66’ (38 mm x 20,1 m)
Corrosion Tape
Semi-Conducting jackets. Electrically ground high-voltage short term: 1100 and 1100P
Tape 13 connections. Provides cable shield 130°C / 266°F
continuation. 3M™ Temflex™ General purpose corrosion tape. 20 mil 80°C 2” x 100’ (51 mm x 30, 5 m)
1” x 30’ (25 mm x 9,14 m) Economy Grade 176°F
Scotch® Protects and overwraps high-voltage 12 mil 180°C Corrosion Tape
Professional Grade cable terminations and serves as base 356°F 1200
Silicone Rubber layer to provide clean reentry into and 1200P
Tape 70 connections. Arc and track resistant.
Self-fusing, long-lasting, silicone rubber.
Special Product Description/ Tape Temp Roll Size
Scotch® Protects and overwraps high-voltage 20 mil center, 180°C 1” x 30’ (25 mm x 9,14 m) Use Tapes Applications Thickness Range
Professional cable terminations, and serves as 8 mil edge 356°F
Grade Heavy Duty base layer to provide clean reentry into Scotch® Thread Pipe thread sealant that provides a 3 mil 260°C 1/4” x 260” (6,3 mm x 7 m)
Triangular Silicone connections. Arc and track resistant. Sealant and leakproof seal. Leakproof seal helps 500°F 1/2” x 260” (13 mm x 7 m)
Rubber Tape 70HDT Self-fusing, long-lasting, thick silicone Lubricant Tape 48* prevent cross threading on pipe 1/2” x 520” (13 mm x 13 m)
rubber, with a triangular tapered edge threads. 1/2” x 1296” (13 mm x 33 m)
profile and a blue guideline for half-
lapping. Scotch® Glass Woven insulating glass cloth; high 27 is 7 mil 27 is Class B temp 1/2” x 66’ (12 mm x 20,1 m)
1” x 15’ (25 mm x 4,5 m) Cloth Tape 27 and temperature resistance. High mechanical 69 is 7.5 mil (130°C / 266°F) 3/4” x 66’ (19 mm x 20,1 m)
Scotch® All-metal open-weave shielding braid, — — 69* strength. Heat stable insulation for 69 is class H temp 3/4” x 60 yd (19 mm x 54,8 m)
Professional Grade conformable, temperature stable. 1” x 100’ (25 mm x 30,4 m)
furnace and oven controls, motor leads (180°C / 356°F) 1” x 60 yd (25 mm x 54,8 m)
Shielding Tape 24 Continue electrostatic shielding across & switches. 1-1/2” x 60 yd (38 mm x 54,8 m)
splice. 1/2” x 36 yd (13 mm x 33 m)
1/2” x 15’ (12 mm x 4,57 m) 3/4” x 36 yd ( 19 mm x 33 m)
Scotch® All-metal woven braid; high current- — — 1” x 36 yd ( 25 mm x 33 m)
Professional Grade carrying capacity of 6AWG wire.
Grounding Tape 25 Solderable. Conformable ground braid Scotch® Barricade Durable polyethylene plastic, bold 2” 3 mil N/A 3” x 300’
for splices and terminations. Tape 300 letters, long roll length, will not tear easily, 3” x 1000’
attracts attention. Barricade applicable
Mastics Product Description/ Tape Temp Roll Size in both large and small areas.
Applications Thickness Range 3M™ Duct Tape Extra heavy duty duct tape, excellent 10.7 mil 93°C 1-7/8” x 60 yd (48 mm x 54,8 m)
3-3/4” x 10’ (95 mm x 3,0 m) 6969 adhesion, tears easily. Moisture proofing 200°F 2-13/16” x 60 yd (72 mm x 54,8 m)
Scotch-Seal ™
Provides excellent environmental and 125 mil 80°C plumbing, duct sealing and protecting.
Professional Grade moisture seal. Conformable and durable 176°F 1” x 10’ (25 mm x 3,05 m)
Mastic Sealing Tape mastic for sealing high-voltage cables
2229* and accessories. Overwrap with vinyl. 3M™ Duct Tape Heavy duty duct tape, excellent 9 mil 65°C 1” x 60 yd (24 mm x 54, 8 m)
2” x 3’ (50 mm x 0,9 m) 3939 adhesion, strong backing. Sealing 150°F 1-7/8” x 60 yd (48 mm x 54.8 m)
Scotch ®
Provides excellent environmental and 65 mil 90°C / 194°F heating ventilation and air conditioning 2-13/16” x 60 yd (72 mm x 54,8 m)
Professional Grade moisture seal. Extra-conformable and emergency 1” x 10’ (25 mm x 3,0 m)
2” x 10’ (51 mm x 3,05 m) ducts. 3-3/4” x 60 yd (96 mm x 54,8 m)
Rubber Mastic durable rubber-backed mastic for sealing overload
Sealing Tape 2228* high-voltage cables and accessories. of 130°C / 266°F
“Built-in” rubber backing for added 3M™ Duct Tape Utility grade, comformable cloth duct 6 mil 93°C 1-7/8” x 50 yd (48 mm x 45.7 m)
conformability. Overwrap with vinyl. 2929 tape 200°F 2-13/16” x 50 yd (72 mm x 45.7 m)
3M Scotchfil® Black, self-fusing, insulating putty in 125 mil 80°C 1-1/2” x 60” (38 mm x 1,53 m)
Electrical Insulation tape form. 176°F
Putty
6-1/2” x 4-1/2” (165 mm x 144 m) pads 3M™ Outdoor Construction, marine and maintenance, 12 mil 93°C 1-7/8” x 45 yd (48 mm x 41.1 m)
Scotch® Provides excellent environmental 2200 is 125 mil 80°C Masking and 90 day UV resistant waterproof backing 200°F
Professional Grade and moisture seal. Conformable and 2210 is 90 mil 176°F 3-1/4” x 4-1/2” (82 mm x 144 m) pads
4” x 10’ (101 mm x 3,04 m) Stucco Tape 5959*
Vinyl Mastic Sealing durable mastic for sealing high-voltage 6147 is 45 mil
Tapes 2200, 2210, cables and accessories. “Built-in” vinyl 6149 is 45 mil 2-1/2” x 10’ (63 mm x 3,04 m)
06147, and 06149* backing for fast application and abrasion 2-1/2” x 2-1/2” (63 mm x 63 m) pads
resistance. 3M™ Value Duct Light duty sealing and holding for 5.8 mil 93°C 1-7/8” x 50 yd (48 mm x 45.7 m)
Tape 1900 non-critical uses, water resistant 200°F 2-13/16” x 50 yd (72 mm x 45.7 m)
Corrosion Product Description/ Tape Temp Roll Size
Protection Tapes Applications Thickness Range
3M™ Scotchrap™ Protect pipe, conduits and fittings from 50 is 10 mil 176°F 1” x 100’ (25 mm x 30,5 m)
2” x 100’ (51 mm x 30,5 m) 3M™ Performance High performance tape that removes 12.6 mil 93°C 1” x 60 yd. (24 mm x 54, 8 m)
Professional corrosion. All-weather performance 51 is 20 mil 80°C Plus Duct Tape cleanly up to six months after exposure 200°F 2” x 60 yd. (51 mm x 54,8 m)
Grade Corrosion and corrosion resistance. Abrasion and 3” x 100’ (76 mm x 30,5 m)
4” x 100’ (102 mm x 30,5 m) 8979 to sunlight and temperature extremes.
Protection Tapes 50 impact-resistant. Aggressive adhesive and high tensile
and 51* 6” x 100’ (152 mm x 30,5 m)
strength for demanding applications
3M™ Scotchrap™ Quick-dry, non-sag rubber base primer N/A 80°C 1 gallon can (3,79 liters)
Professional Grade that prepares metal surfaces for tape 176°F 3M™ Temflex™ Provides extra abrasion resistance for 15 mil 80°C 3/4” x 60’ (19 mm x 18,28 m)
Pipe Primer application. For use with Scotchrap Cotton Friction splices and connections. 176°F 3/4” x 82-1/2’ (19 mm x 25 m)
Tapes 50 & 51, Temflex Tapes 1100 & Tape 1755 1-1/2” x 82-1/2’ (38 mm x 25 m)
1200.
32 33
Aerosols, Sprays & Coatings
Protective sprays
Scotch® 1600 (400ml)
Scotch® 1600 provides highly effective anti-corrosion protection. Its rubber-asphalt base forms a dense, abrasion
resistant covering that protects against moisture, spray salt water, all corrosive media and is resistant to the effects
of physical impacts.
Insulating sprays
Scotch® 1601 Clear Insulation Spray (400ml)
Scotch® 1601 is a clear insulating and covering paint based on alkyd resin. It “hardens” into a flexible and resistant
film, with excellent adhesion to most common surfaces such as metal, glass, plastic, wood, etc. Scotch® 1601 is
resistant to UV-rays, acids, oil and alkalis, it is moisture and weatherproof and is especially characterized by its high
dielectric strength.
3M ™
As Scotch® 1601 but with the addition of colouring pigments for coloured protection, insulation or marking.
34 35
Scotchflex Cable Ties
Technical Data
3M ™Scotchflex
Cable-ties (Black) nylon for indoor application Cable-ties (natural) nylon 6/6 for indoor application
FS 100 AW-C 100 mm x 2.5 mm WEATHER FS 100 A-C 100 mm x 2.5 mm NEUTRAL
FS 140 AW-C 140 mm x 2.5 mm WEATHER FS 140 A-C 140 mm x 2.5 mm NEUTRAL
Cable Ties
FS 140 BW-C 140 mm x 3.6 mm WEATHER FS 140 B-C 140 mm x 3.6 mm NEUTRAL
FS 160 AW-C 160 mm x 2.5 mm WEATHER FS 160 A-C 160 mm x 2.5 mm NEUTRAL
FS 160 CW-C 160 mm x 4.8 mm WEATHER FS 160 C-C 160 mm x 4.8 mm NEUTRAL
FS 200 AW-C 200 mm x 2.5 mm WEATHER FS 200 A-C 200 mm x 2.5 mm NEUTRAL
FS 200 BW-C 200 mm x 3.6 mm WEATHER FS 200 B-C 200 mm x 3.6 mm NEUTRAL
FS 200 CW-C 200 mm x 4.8 mm WEATHER FS 200 C-C 200 mm x 4.8 mm NEUTRAL
3M™ Cable Ties are molded from 6/6 Nylon and are available in a variety of sizes FS 200 DW-C 200 mm x 7.6 mm WEATHER FS 200 D-C 200 mm x 7.6 mm NEUTRAL
including weather resistant black for outdoor use. Products with the UR symbol FS 280 CW-C 280 mm x 4.8 mm WEATHER FS 280 C-C 280 mm x 4.8 mm NEUTRAL
section meet UL Standard 1565 for Wire Positioning Devices. UL File #E116841.
FS 280 DW-C 280 mm x 7.6 mm WEATHER FS 280 D-C 280 mm x 7.6 mm NEUTRAL
3M™ Cable Ties are used to secure wire bundles and harness components quickly. FS 300 BW-C
300 mm x 3.6 mm WEATHER FS 300 B-C
300 mm x 3.6 mm NEUTRAL
The flexible design allows the user to slip ties easily under and around cables and FS 370 CW-C 370 mm x 4.8 mm WEATHER FS 370 C-C 370 mm x 4.8 mm NEUTRAL
harnesses. The bend of the tail makes it easier to grasp position and insert into the FS 370 DW-C 368 mm x 7.6 mm WEATHER FS 370 D-C 368 mm x 7.6 mm NEUTRAL
head. 3M Cable Ties can be used with most standard tensioning/cutoff tools for fast
FS 390 CW-C 390 mm x 4.8 mm WEATHER FS 390 C-C 390 mm x 4.8 mm NEUTRAL
production line fastening.
FS 530 DW-C 530 mm x 7.6 mm WEATHER FS 530 D-C 530 mm x 7.6 mm NEUTRAL
FS 780 DW-C 776 mm x 9.0 mm WEATHER
36 37
3M™ Cable & Wire Lubricant
The thick, consistent lubricant does not liquefy or separate with hot
aging; it scoops and applies easily to wire and cable without runs or
drips in hot temperatures; and it will not evaporate too soon after
pulls. The lubricant’s low friction coefficient lessens the chance of
wire damage from high pulling forces, wipes off the cable quickly
and cleanly and leaves fewer residues in the conduit to block future
pulls or prevent removal. Because 3MTM Wire Pulling Lubricant Wax
can be immersed in water for 30 minutes with minimal weight loss,
it is also the choice for wet weather applications.
3MWireCable &
Lubricant
™ 3M™ Wire Pulling Lubricant Gel
This is a water-soluble, translucent white gel that is easy to handle
and apply to wire and cable without runs or drips. The lubricant
produces a low coefficient of friction that lessens the chance of wire
damage from high pulling forces.
Not only does 3MTM Wire Pulling Lubricant Gel make wire pulling jobs
smoother and safer, it also wipes off the cable quickly and cleanly
before terminating or splicing. The consistent gel does not liquefy, or
separate with hot or cold aging. It stays thick, smooth and ready to
apply. Temperature use range is 20oF (-6 oC) to 110 oF (43 oC).
Produces a low coefficient of friction for smooth, low tension wire and cable pulling.
Easy to apply without runs or drips. Colourless and non-staining.
3M’s complete line of Wire Pulling Lubricants are designed for specific applications,
so you can choose the right lubricant for the job at hand.
You can count on 3M reliability through high pulling forces, extreme temperature
changes, wet weather and the damaging effects of time.
38 39
Scotchlok Electrical Spring Connectors
3M™ Scotchlok™
Electrical Spring Connector
Features
Connector Conductor Combinations* These four spring connectors have a corrosion-resistant
Cross section Quantity steel inner shell to strengthen them while permitting
sol/str (mm2) spring expansion and contraction due to temperature
Y 1 5-6 changes.
1.5 4-5 A deep, flared skirt makes wire insertion easier and
protects against faults.
2.5 2-5 The design and a flexible base let Scotchlok connectors
bend with the wires you’re slicing to fit easily into tight
4 2-4
places.
R 1 5-6 Color coded, with a flexible base allowing easy bending
and An outer insulator that gives a compact, fully
1.5 4-6
insulated connection that won’t cut or abrade wires.
2.5 2-5 Corrosion-resistant steel inner shell to strengthen while
permitting spring expansion and contraction due to
4 2-4 temperature changes.
3M Scotchlok
™
6 2
Application
B/G 2.5 3-6 The live action spring delivers reliable, vibration-resistant
connections over a wide range of wire
4 2-5
6 2-4
Locking fingers in the tube ensure that the Scotchlok Spring Connector
stays in position, the closed tube cover provides strain relief, and the
design protects against corrosion failure. Application temperature
range is 0°C - 49°C
40 41
3M Constant Force
™
Springs
3MThermometers
Infrared
Ditection of overheating in electrical equipment and wiring
™
42 43
Gulf Offices
3M Gulf Ltd. 3M Saudi Arabia Lebanon Branch Kuwait Branch
3/F, Bldg. No. 11, (Branch of The 3M Company) PO Box 11-5025 PO Box 148,
Dubai Internet City Post Box: 21840 Riad El Solh - Safat 13002,
P.O. Box 20191, Dubai, UAE Riyadh 11485, K.S.A. Beirut 1107 2180 Kuwait
Tel: +971 4 3670 777 Tel : +9661 465 0052 Tel: +961 (1) 373771 Tel: +965 249 1649
Fax: +971 4 3670 998 Fax: +9661 465 8980 Fax: +961 (1) 379947 - 379938 Fax 965 249 1648