Professional Documents
Culture Documents
CLOSE TO YOU
high translucent zirconium oxide (3Y-TZP-LA)
Perfect for:
physical features
monolithic crowns and bridges
characteristics value
cut back (one layer)
ZrO2, HfO2, Y2O3 > 99%
highly aesthetic veneering
Al2O3 < 0,5%
reliable reproduction of color via industrial coloring
other oxides < 0,25%
time-saving, as no additional coloring or drying is
fracture toughness > 6 MPa* m1/2
necessary
bending strength (4-point) 1200 (+/- 200) MPa
all ranges are possible
Multi-Additive-Technology®
Accuracy in the production of VITA® shades is the foundation for a successful pre-colored zirconia. Especially important
is the consistency in the reproduction of shades. The Multi-Additive-Technology® from Dental Direkt defines a new
standard in color accuracy according to VITA® shades with an incomparable consistency of color reproduction.
From our experience with DD Bio ZX² color light, medium, intense, low chromatic and high chromatic we have
seen that the demand for the very accurate reproduction of shades has grown tremendously – leading to the
ambitious goal of developing all 16 VITA® shades. The demand is driven by an increase in high quality and highly
aesthetic monolithic restorations. Within this trend the user benefits from our Multi-Additive-Technology®
which combines biocompatible, metal free coloring dopants in a very balanced concentration for every single
VITA® shade. The development process of all 16 VITA® shades contains visual approval as well as measuring
techniques. Hereby we rely on the L*a*b values (see visualization) which are obtained using the CIELAB model.
powder
Dies
Dies
Dies
Dies
blank
Pre-pressing of the ZrO2 granules at Axially pre-formed blanks are Hydrostatic pressing in water bath at up to 2,500 bar.
up to 120 t. shrink-wrapped The result is a homogeneous structure free from defects
To achieve the best strength and translucency, isostatic pressing has to be a core process in zirconium oxide production. When pressing of the blanks
is solely uniaxial, they have a greater potential for imperfections in the microstructure and are less homogeneous. In order to guarantee the best
properties, all DD Bio ZX² blanks are pressed individually and isostatically in a complex process.
high translucent zirconium oxide (3Y-TZP-LA)
height A1 A2 A3 A3,5 A4
height B1 B2 B3 B4
height C1 C2 C3 C4
height D2 D3 D4