Professional Documents
Culture Documents
SERIES
Effective August 2015
CA800020EN Supersedes 800-47 March 2013
Installation
No special tools are required. The bushing is
mounted through the apparatus sidewall and
clamped externally. Refer to Service Information
S800-35-2 High-Voltage Primary Bushings
Installation Instructions for details.
Production tests
Tests are conducted in accordance with IEEE Std
386™-2006 standard.
• AC 60 Hz 1 Minute Withstand
• 50 kV
5.85 5.25
(149 mm) (133 mm)
TANK WALL
1.25
(31.8 mm)
5/8-11 UNC
THREAD
BOTH ENDS
GROUND CLIP
(Internal Ground 4.00
Screen) (102 mm)
.75 2.56
(19 mm) (65 mm)
TANK WALL
OPENING
INTERFACE
IEEE STD 386™-2006 STANDARD, FIG 13
600 A DEADBREAK NO. 1, 21.1 KV
Figure 1. 600 A 35 kV Class Deadbreak Apparatus Bushing.
2 www.eaton.com/cooperpowerseries
600 A 35 kV class deadbreak apparatus bushing Catalog Data CA800020EN
Effective August 2015
5/8-11 UNC
THREAD
2.56" BOTH ENDS
5.0 mm)
NK WALL
PENING
Ø .500" Ø 3.25"
(4 REQD) (82.6 mm)
Figure 2. Clamp front and side view.
5.17"
(131.3 mm)
3.75"
5.3 mm)
1.25"
(31.8 mm)
Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton.com
Eaton, Cooper Power, BOL-T, and T-OP are
Eaton’s Cooper Power Systems Division valuable trademarks of Eaton in the U.S. and
2300 Badger Drive other countries. You are not permitted to use
Waukesha, WI 53188 these trademarks without the prior written
United States consent of Eaton.
Eaton.com/cooperpowerseries IEEE Std 386™-2006 standard is a trademark
of the Institute of Electrical and Electronics
© 2015 Eaton Engineers, Inc., (IEEE). This publication is not For Eaton’s Cooper Power series deadbreak
All Rights Reserved endorsed or approved by the IEEE. apparatus bushing product information
Printed in USA Envirotemp™ and FR3™ are licensed call 1-877-277-4636 or visit:
Publication No. CA800020EN trademarks of Cargill, Incorporated. www.eaton.com/cooperpowerseries.