Professional Documents
Culture Documents
2
Product Ends Connection:
Raised Face, Ring Joint,
Materials:
• Floating Ball Valves Forging in Carbon Steel,
• Trunnion mounted Ball Valves Stainless Steel, Duplex/Super
• Top Entry Ball Valves Duplex Steel, Special Alloys, etc.
• Special service Ball Valves Cast materials available
• D.B.&B. Ball Valves upon request.
(Two balls in one piece body)
Design according to:
Sizes: From 1/2” to 60” API 6D/ISO 14313
Class 150 to 2500 Pressure Range:
API 2000-3000-5000-10000. ASME 150 ÷ 2500
API 6A/ISO 10423
Construction: Pressure Range:
Split Body Bolted Type, API 2’000 ÷ 15.000
Metal to Metal Seats,
Soft Seats. Applicable code:
ASME, ANSI, BS, API.
Bore:
Full Bore, Reduced Bore.
F2E Floating Ball valve - Two (2) pieces Split bolted C= Cryogenic Service Size:
body - API 6D/ISO 14313 or BS 5351 - “PTFE and/or with Extended 1/2” ÷ 6”x4”
Graphite” primary seals - Soft seated - antistatic device Bonnet Pressure Class:
& anti-blow-out stem - Fire Safe Design to API 6FA ASME 150 ÷ 2500
or API 607 or BS 6755 part.2 . M= Metal seated
FWA Floating Ball valve - Two (2) pieces FULLY WELDED C= Cryogenic Service
body - API 6D/ISO 14313 or BS 5351 - Soft seated with Extended Size:
- antistatic device & anti-blow-out stem - Fire Safe Bonnet 1/2” ÷ 6”x4”
Design to API 6FA or API 607 or BS 6755 part.2 . Pressure Class:
M= Metal seated ASME 150 ÷ 2500
Other:
• Special execution for any customer • ISO 5211 drilling on Top work.
requirements. • Locking Device with or without
• Adjustable Stem Packing. padlock.
4
Floating Ball Valve
3” Class 300 RF
A350 LF2
5
Trunnion
Mounted
Ball Valves
Other:
• Special execution for any • ISO 5211 drilling on Top work.
customer requirements • Locking Device with or without
• Adjustable Stem Packing padlock.
6
7
Top Entry
Ball Valves
Trunnion
Type
Other:
• Special execution for any customer • ISO 5211 drilling on Top work.
requirements. • Locking Device with or without
• Adjustable Stem Packing. padlock.
8
9
Combined D.B. & B.
Ball Valves
Other:
• Special execution for any • ISO 5211 drilling on Top work.
customer requirements • Locking Device with or without
• Adjustable Stem Packing padlock.
10
Combined Floating Ball Valve Combined Trunnion
3/4” Class 600 RTJ/NPT - ASTM Mounted Ball Valve
A182 F44 - Metal Seated. (Two ball into one body)
11
Technical Features
Special execution
WOS Weld Overlay on Stem Seals Area EGS Emergency Grease Injector for Stem
WOP Weld Overlay on Seat Seals Area EGSS Emergency Grease Injector for Stem
(Seat pocket area) & Seats
WOSP Weld overlay on Stem seals and Seat EXB Extended Bonnet suitable
Seals Area (Stem & Seat pocket area) for Cryogenic Service
WOL Clad Weld overlay on all wetted internal HOVF Tungsten or Chrome carbide overlay;
surface High Velocity Oxygen Fuel (HVOF).
Base Materials
CS, LTCS Carbon Steel, Low temperature HS High strength low alloyed steels
carbon steel Ni Nickel alloy
SS Austenitic Stainless steel; type 316 Ti Titanium
DPX, SDP Ferritic/Austenitic Duplex steel, ENP Electroless Nickel Plated on Base
Superduplex steel Materials.
6Mo Austenitic Stainless steel; type 6Mo
12
Technical Data
Flow Coefficients (Cv)
NS (inch.) ASME 150 ASME 300 ASME 600 ASME 900 ASME 1500 ASME 2500
1/2 16 14 12 11 11 10
3/4 44 38 34 31 30 29
1 90 78 69 65 63 47
1.1/2 227 211 187 167 163 90
2x1.1/2 145 145 140 120 120 100
2 420 420 400 330 330 250
2.1/2 690 690 610 520 510 320
3×2 200 200 200 190 180 200
3 1200 1050 1000 910 820 500
4×3 600 600 600 590 550 560
4 2200 2100 1850 1800 1700 1100
6×4 800 800 790 790 780 745
6 5150 5100 4600 4380 3800 2500
8×6 2150 2150 2150 2150 2150 2150
8 9500 9400 9000 8500 7400 5300
10×8 4300 4300 4300 4450 4450 4100
10 15000 15000 14700 14500 11500 8300
12×10 7550 7550 7550 8000 9000 7550
14×10 6000 6000 6000 6100 6100 -
12 23000 23000 22500 21100 18000 13000
14×12 14000 14000 14000 12800 13000 -
16×12 9100 9100 9100 8900 8900 -
14 28000 28000 28000 25000 21000 -
16×14 15000 15000 15000 14200 14100 -
16 37200 37200 37200 34500 27500 -
18×16 21000 21000 21000 19200 19000 -
20×16 15300 15300 15300 13800 12000 -
18 49000 49000 49000 45000 37000 -
20×18 28400 28400 28400 25000 25000 -
20 59000 59000 59000 55200 47800 -
24×20 28200 28200 28000 25100 20600 -
22 68200 68200 68200 62000 54000 -
24 92000 92000 92000 83800 70000 -
30×24 36000 36000 36000 32900 - -
26 110000 110000 110000 98500 - -
28 121000 121000 121000 113000 - -
30 145000 144000 144000 130000 - -
36×30 64000 64000 64000 61500 - -
32 170000 170000 170000 151000 - -
36×32 87000 87000 87000 69500 - -
36 210000 210000 210000 198200 - -
Flow coefficient, or CV, by definition, is the volume of water in gallons per minutes at 60°F that will flow
through a given element with a pressure drop of 1 psig .
13
Maximum Allowable Stem Torque
NS
DN 150# 300# 600# 900# 1500# 2500#
(inch) (mm) Stem MAST Stem MAST Stem MAST Stem MAST Stem MAST Stem MAST
1/2 15 18 464 18 464 18 464 18 464 18 464 21,5 790
3/4 20 18 464 18 464 18 464 18 464 18 464 21,5 790
1 25 18 464 18 464 18 464 18 464 18 464 21,5 790
1,5 40 21,5 790 21,5 790 21,5 790 21,5 790 21,5 790 32 2606
2 50 21,5 790 21,5 790 21,5 790 21,5 790 21,5 790 32 2606
3 80 32 2606 32 2606 32 2606 32 2606 32 2606 42 5892
4 100 32 2606 32 2606 42 5892 42 5892 48 8794 48 8794
6 150 42 5892 42 5892 48 8794 48 8794 55 13230 67 23917
8 200 48 8794 48 8794 48 8794 48 8794 80 40715 80 40715
10 250 55 13230 55 13230 55 13230 55 13230 80 40715 90 57971
12 300 55 13230 55 13230 65 21839 85 48836 90 57971 90 57971
14 350 65 21839 65 21839 85 48836 85 48836 95 68180 120 137414
16 400 65 21839 65 21839 85 48836 85 48836 95 68180 120 137414
18 450 80 40715 80 40715 95 68180 120 137414 120 137414 150 268386
20 500 80 40715 80 40715 95 68180 120 137414 120 137414 175 426187
22 550 85 48836 85 48836 120 137414 120 137414 150 268386 175 426187
24 600 90 57971 90 57971 120 137414 150 268386 150 268386 175 426187
26 650 95 68180 95 68180 120 137414 175 426187 175 426187 175 426187
28 700 110 105843 110 105843 150 268386 175 426187 175 426187 175 426187
30 750 120 137414 120 137414 150 268386 150 268386 175 426187 175 426187
32 800 120 137414 120 137414 150 268386 175 426187 175 426187 175 426187
34 850 120 137414 120 137414 150 268386 175 426187 175 426187 175 426187
36 900 120 137414 120 137414 150 268386 175 426187 175 426187 200 636174
Stem Material Group: F51 - AISI4140 - F6a Cl.2 - 17-4PH® - NITRONIC 50®.
14
Special Features
Trunnion Mounted Ball Valve Actuated Trunnion Trunnion Mounted Ball Valve
10” Class 900 RF - ASTM A182 F51 Mounted Ball Valve 10” Class 2500 HUB - A694 F52
Metal seated 12” Class 1500 HUB
15
Test
48 hours Body High Test Equipments
Pressure Gas Test Pressure test
Recording Equipment
Trunnion Mounted
Ball Valve
12” Class 900 RTJ
ASTM A182 F51
16
Test Equipments Trunnion Mounted Ball Valve
Fuggitive Emission (FE) 20” Class 300 RF - ASTM 350 LF2
& High Pressure Gas Test Area Fully Cladded Inconel 625
Test Equipments
Cryogenic Test Area
17
Applicable Standards
And Regulations
API - American Petroleum Institute
Spec. 6A 17D Specification for Subsea Wellhead
ISO 10423 Specification for Wellhead and Christmas Tree Equipment.
and Christmas Tree Equipment. 598 Valve Inspection and Testing.
Spec. 6D 607 Fire Test for Soft-Seated Quarter-Turn
ISO 14313 Specification for Pipeline Valves. Valves.
Q1 Specification for Quality Programs 6FA Specification for Fire Test for Valves.
for the Petroleum and Natural Gas.
EN - Euro Norme
97/23/EC Pressure Equipment Directive (PED) MR 0175 Standard Material Requirements
94/9/EC Equipment and Protective systems Sulfide Stress Cracking Resistant
intended for use in a potentially Metallic Material for Oilfield Equipment
Explosive Atmospheres “ATEX”
NACE National Association of Corrosion
Engineers
18
ASTM - American Society for Testing and Materials
A 105 Forgings, Carbon Steel, for Piping A 351 Austenitic Steel Castings for High
Components. Temperature Service.
A 350 Forgings, Carbon and Low-Alloy Steel, A 352 Ferritic Steel Castings for Pressure
requiring Notch Toughness Testing Containing Parts Suitable for Low
for Piping Components. Temperature Service.
A 182 Forged or Rolled Alloy - Steel Pipe A276 Stainless Steel Bars.
Flanges, Forged Fittings, and Valves A479 Stainless Steel Bars and Shapes for use
and Parts for High Temperature Service. in Boilers and Other Pressure Vessels.
A694 Carbon and Alloy Steel Forgings A217 Martensitic Stainless Steel and Alloy Steel
for Pipe Flanges, Fittings, Valves, Castings for Pressure Containing Parts
and Parts for High-Pressure Suitable for High Temperature Service.
Transmission Service. A 370 Mechanical Testing of Steel Products.
A564 Hot-Rolled and Cold-Finished A106 Seamless Carbon Steel Pipe
Age-Hardening Stainless Steel Bars for High-Temperature Service.
and Shapes. A333 Seamless and Welded Carbon Steel
A193 Alloy-Steel and Stainless Steel Bolting Pipe for Low-Temperature Service.
Materials for High-Temperature Service. A312 Seamless and Welded Austenitic
A320 Alloy-Steel and Stainless Steel Bolting Stainless Steel Pipes.
Materials for Low-Temperature Service. B446 Standard Specification for Nickel
A194 Carbon and Alloy Steel Nuts for Bolts Chromium-Molybdenum-Columbium
for High Pressure or High Temperature Alloy (UNS N06625), Nickel
Service or Both. Chromium-Molybdenum-Silicon
A453 High-Temperature Bolting Materials, Alloy (UNS N06219), and Nickel
with Expansion Coefficients Comparable Chromium-Molybdenum-Tungsten
to Austenitic Stainless Steels. Alloy (UNS N06650)* Rod and Bar.
A 216 Carbon Steel Castings Suitable for Fusion B564 Standard Specification for Nickel Alloy
Welding for High-Temperature Service. Forgings.
19
AdverTime - MI
Malpensa
A8
Torino Origgio
A4
Milano
Memit Valves srl A2 Bergamo
Head Office
Brescia
Via alla Chiesa, 45
20030 Senago (MI) Italy A7
A1
Workshop & Warehouse
Via Celeste Milani, 18/20 Genova
21040 Origgio (VA) Italy
Ph. (+39) 02.96734128 Bologna
Fax (+39) 02.96732549
info@memitvalves.com
memitvalves.com
P. IVA 09929080969