Professional Documents
Culture Documents
C. Transfer impedance
D. Transfer admittance
ANSWER: A
The ratio of the current transform at one port to current transform at other port is called
A. Transfer admittance
B. Transfer impedance
ANSWER: C
The ratio of voltage transform at first port to the current transform at the second port is called
B. Transfer admittance
D. Transfer impedance
ANSWER: D
The driving point function is the ratio of polynomials in s. Polynomials are obtained from the of the
elements and their combinations
A. transform voltage
B. transform current
C. transform impedance
D. transform admittance
ANSWER: C
A. 0
B. 1
C. 2
D. ∞
ANSWER: D
A function N (S) is said to have a pole (or zero) at infinity, if the function N (1/S) has a pole (or zero) at S
=?
A. ∞
B. 2
C. 0
D. 1
ANSWER: C
The number of zeros including zeros at infinity is __________ the number of poles including poles at
infinity
A. greater than
B. equal to
C. less than
ANSWER: B
The poles of driving point impedance are those frequencies corresponding to ___________ conditions
A. short circuit
B. voltage source
C. open circuit
D. current source
ANSWER: C
The zeros of driving point impedance are those frequencies corresponding to ___________ conditions
A. current source
B. open circuit
C. voltage source
D. short circuit
ANSWER: D
In the driving point admittance function, a zero of Y (s) means a _______of I (S)
A. 1
B. 2
C. 3
D. zero
ANSWER: D
In the driving point admittance function, a pole of Y (s) means a _______ of V (S)
A. zero
B. 1
C. 2
D. 3
ANSWER: A
A. Positive or zero
B. negative or zero
C. positive
D. negative
ANSWER: B
A. complex
D. simple
ANSWER: D
A. zero
B. unity
C. infinite
D. sinusoidal
ANSWER: A
C. always imaginary
ANSWER: D
An impedance function whose real part vanishes at some real frequency is called?
ANSWER: D
A. no zero at origin
B. no poles at origin
ANSWER: D
A. a capacitance In series
B. an inductance in series
D. none of these
ANSWER: B
A. it's zero
B. it's poles
ANSWER: B
As the poles of network shift away from the axis, the response?
A. remains constant
D. none of these
ANSWER: B
A. becomes zero
B. becomes unity
C. becomes infinite
ANSWER: C
An inductor has self-resistance of 5 ohm and inductive reactance of 250 ohms at the operating
frequency. The quality factor of the inductor is?
A. 1250
B. 50
C. 250
D. 5
ANSWER: B
A. R increases
B. R decreases
D. current decreases
ANSWER: B
The denominator polynomial in a transfer function may not have any missing terms between the highest
and the lowest degree, unless?
ANSWER: C
The roots of the odd and even parts of a Hurwitz polynomial P (s) lie on ____________
C. on jω axis
D. on σ axis
ANSWER: C
If the polynomial P (s) is either even or odd, then the roots of P (s) lie on __________
A. on σ axis
B. on jω axis
ANSWER: B
If the ratio of the polynomial P (s) and its derivative gives a continued fraction expansion with ________
coefficients, then the polynomial P (s) is Hurwitz.
A. all negative
B. all positive
C. positive or negative
ANSWER: B
When s is real, the driving point impedance function is _________ function and the driving point
admittance function is _________ function.
A. real, complex
B. real, real
C. complex, real
D. complex, complex
ANSWER: B
The poles and zeros of driving point impedance function and driving point admittance function lie on?
ANSWER: C
For real roots of sk, all the quotients of s in s2+ωk2 of the polynomial P (s) are __________
A. negative
B. non-negative
C. positive
D. non-positive
ANSWER: B
The real parts of the driving point function Z (s) and Y (s) are?
B. positive
C. zero
D. positive or zero
ANSWER: D
For the complex zeros to appear in conjugate pairs the poles of the network function are ____ and zeros
of the network function are ____________
A. complex, complex
B. complex, real
C. real, real
D. real, complex
ANSWER: C
Based on the location of zeros and poles, a reactive one-port can have ____________ types of frequency
response.
A. 1
B. 2
C. 3
D. 4
ANSWER: D
Consider the impedance functionZ(s)=( s2+6s+8)/( s2+3s). Find the value of R1 after performing the first
Cauer form.
A. 1
B. 2
C. 3
D. 4
ANSWER: A
Find the first reminder obtained by taking the continued fraction expansion in question
A. s + 8
B. 2s + 8
C. 3s + 8
D. 4s + 8
ANSWER: C
Consider the impedance function Z(s)=( s2+6s+8)/( s2+3s). Find the value of C1 after performing the
second Cauer form.
A. 1/2
B. 3/8
C. 1/4
D. 1/8
ANSWER: B
Consider the impedance function Z(s)=( s2+6s+8)/( s2+3s). Find the first reminder obtained by taking the
continued fraction expansion
A. 10s/3+s2
B. s/3+s2
C. 10s/3+3s2
D. s/3+3s2
ANSWER: A
Consider the impedance function Z(s)=( s2+6s+8)/( s2+3s). Find the value of R1
A. 9/10
B. 10/9
C. 8/9
D. 9/8
ANSWER: B
Consider the impedance function Z(s)=( s2+6s+8)/( s2+3s). Find the value The value of C2
A. 3
B. 3/10
C. 3/100
D. 3/1000
ANSWER: C
Consider the impedance function; Z(s)=((s+4)(s+8))/((s+2)(s+6)) . Find the value of R1 after converting
into first Cauer form.
A. 1
B. 2
C. 3
D. 4
ANSWER: A
Consider the impedance function; Z(s)=((s+4)(s+8))/((s+2)(s+6) Find the value of R1 after converting into
first Cauer form.
A. 1
B. 2
C. 3
D. 4
ANSWER: A
A. 1
B. 1/2
C. 1/4
D. 1/8
ANSWER: C
A. 1/4
B. 2/4
C. 3/4
D. 4/4
ANSWER: C
Consider the impedance function; Z(s)=((s+4)(s+8))/((s+2)(s+6)) . Find the value of L3 in cure form
A. 4/3
B. 3/4
C. 4/5
D. 5/4
ANSWER: B
ANSWER: A
A. Continued fraction
B. Partial fraction
C. Laplace Transform
D. Numerical method
ANSWER: A
The fosters method is
A. Continued fraction
B. Partial fraction
C. Laplace transform
D. Numerical method
ANSWER: B
Two port network are connected in cascade. The combination is to be represented as a single two port
network by multiplying the individuals
A. Z parameter
B. Y Parameters matrices
C. H parameter matrices
ANSWER: D
What does the connectivity of energy source at the port of the network is known as
A. Driving point
B. Transfer Point
C. Both a and b
ANSWER: A
A. Current
B. Voltage
C. Both a and b
ANSWER: B
A. Z parameter
B. Y parameter
C. H parameter
D. ABCD parameter
ANSWER: D
If the two ports are connected in cascade configuration, then which arithmetic operation should be
performed between the individual transmission parameters in order to determine overall transmission
parameters?
A. Addition
B. Subtraction
C. Multiplication
D. Division
ANSWER: D
Which among the following represents the precise condition of reciprocity for transmission parameters?
A. AB - CD = 1
B. AD – BC = 1
C. AC – BD = 1
ANSWER: B
Which is the correct condition of symmetry observed in z-parameters?
A. z11 = z22
B. z11 = z12
C. z12 = z22
D. z12 = z21
ANSWER: A
An open circuit reverse voltage gain in h-parameters is a unitless quantity and generally equivalent to
________
A. V1 / I1 (keeping V2 = 0)
B. I2 / I1 (keeping V2 = 0)
C. V1 / V2 (keeping I1 = 0)
D. I2 / V2 (keeping I1 = 0)
ANSWER: C
How is the short circuit reverse transfer admittance (y12) calculated in terms of current and voltage
ratio?
A. V2/ I1 (keeping I2 = 0)
B. I2/ V1 (keeping V2 = 0)
C. I1/ V2 (keeping V1 = 0)
D. V1/ I2 (keeping I1 = 0)
ANSWER: C
A. A and D
B. A and B
C. B and C.
D. A and C.
ANSWER: A
A. Y11 = Y12.
B. Y12 = Y21.
C. Y11 = Y22.
D. Y12 = Y22.
ANSWER: B
A. Cauer filter
B. Butterworth filter
C. Chebyshev filter
D. Band-reject filter
ANSWER: B
A. Band-reject filter
B. Band-stop filter
C. Band-elimination filter
ANSWER: D
Given the lower and higher cut-off frequency of a band-pass filter are 2.5kHz and 10kHz. Determine its
bandwidth.
A. 750 Hz
B. 7500 Hz
C. 75000 Hz
ANSWER: B
In which filter the output and input voltages are equal in amplitude for all frequencies?
A. All-pass filter
ANSWER: B
ANSWER: C
Which among the following has the best stop band response?
A. Butterworth filter
B. Chebyshev filter
C. Cauer filter
ANSWER: C
The property of coil by which a counter emf is induced in it when the current through the coil changes is
known
A. Self-inductance
B. Mutual inductance
D. Capacitance
ANSWER: A
C. Both
D. None of these
ANSWER: A
Which of the following circuit element stores energy in the electromagnetic field
A. Inductance
B. Condenser
C. Variable register
D. Resistance
ANSWER: A
The inductance of coil will increase under all the following condition except
ANSWER: A
ANSWER: D
A. Ohm
B. Henry
C. Ampere turns
D. Meter
ANSWER: B
If in an iron cored coil the iron core is removed so as to make the air cored coil, the inductance of the
coil will be
A. More
B. Less
C. Same
D. None of these
ANSWER: B
A. ABCD parameters.
B. Z parameters.
C. Y parameters.
D. h parameters.
ANSWER: A
A. Z11 = Z12
B. Z11 = Z22
C. Z12 = Z21
D. Z12 = Z22
ANSWER: B
A. Y11
B. none of these
C. Y12
D. Y22
ANSWER: B
For finding the Z11 parameter at the input port of a two port network
ANSWER: A
A. impulse function
B. ramp function
C. gate function
D. parabolic function
ANSWER: A
A. AD-BC = 1
B. AB-CD = 1
C. AC-BD = 1
D. all of these
ANSWER:
ANSWER: A
It is possible to overcome the drawback of m-derived filter by connecting number of sections in addition
to prototype & m-derived sections with terminating __________
a. One-fourth sections
b. Half sections
d. Full sections
ANSWER: B
Which value of 'm' is selected in a composite filter, while connecting the terminating sections in order to
acquire proper impedance matching and constant characteristic impedance throughout the passband?
a. 0.3
b. 0.6
c. 0.9
d. 0.12
ANSWER: B
In band elimination filter, the frequency of resonance of individual arms is geometric _________
ANSWER: A
A network either T or π, is said to be of the constant-k type if Z1 and Z2 of the network satisfy the
relation?
a) Z1Z2 = k
b) Z1Z2 = k2
c) Z1Z2 = k3
d) Z1Z2 = k4
ANSWER: B
a) √LC
b) √((L/C) )
c) √((C/L) )
d) √((1/CL) )
ANSWER: B
a) 1/√LC
b) 1/(π√LC)
c) √LC
d) π√LC
ANSWER: B
The value of α in the pass band of constant k-low pass filter is?
a) 2 cosh-1(fc/f)
b) cosh-1(fc/f)
c) cosh-1(f/fc)
d) 2 cosh-1(f/fc)
ANSWER: D
The value of β in the attenuation band of constant k-low pass filter is?
a) 0
b) π
c) π/2
d) π/4
ANSWER: B
The value of α in the attenuation band of constant k-low pass filter is?
a) α=2 cosh-1(fc/f)
b) α=cosh-1(f/fc)
c) α=2 cosh-1(f/fc)
d) α=cosh-1(fc/f)
ANSWER: C
The value of α in the pass band of constant k-low pass filter is?
a) π
b) π/4
c) π/2
d) 0
ANSWER: D
What is a filter?
ANSWER: A
What are filters created by using resistors and capacitors or inductors and capacitors called?
a) Active filters
b) Passive filters
c) Continuous filters
d) Differential filters
ANSWER:B
What type of filter produces a predictable phase shift characteristic in all frequencies?
ANSWER: D
ANSWER: B
Find the cut off frequency for an RC low pass filter of R=8.2Ω and C=0.0033μF?
a) 6KHz
b) 5.88KHz
c) 4.26KHz
d) 7.91KHz
ANSWER: B
What is the value of resistor for a high pass RC filter to produce a cutoff frequency of3.4KHz if C =
0.047μF?
a) 654Ω
b) 1000Ω
c) 996Ω
d) 752Ω
ANSWER:C
What is the loss the filter introduces to the signals in the passband called?
a) passband loss
b) Insertion loss
c) Attenuation
d) Degradation
ANSWER: B
What is the component in which the output voltage is higher than the input voltage?
a) Attenuator
b) Amplifier
c) Differential
d) Multiplexer
ANSWER: B
What is the gain of the signal if output and input voltages are 700V and 50mV respectively?
a) 14000
b) 14
c) 71
d) 71400
ANSWER: A
What is the output signal voltage for a gain of 20 and input voltage of 20mV?
a) 400V
b) 4V
c) 400mV
d) 10V
ANSWER: C
The power output of an amplifier is 7 watts. The power gain is 80. What is the input power?
a) 87.5mW
b) 87.5W
c) 13W
d) 13mW
ANSWER: A
What is the total gain of amplifiers with a power gain of 6, 8, 5 when connected in series?
a) 24
b) 20
c) 19
d) 240
ANSWER: D
The value of resonant frequency in the m-derived low pass filter is?
a) fr=1/(√(LC(1+m2 ) ))
b) fr=1/(√(πLC(1+m2 ) ))
c) fr=1/(√(LC(1-m2 ) ))
d) fr=1/(√(πLC(1-m2 ) ))
ANSWER: D
a) 1/√LC
b) 1/(π√LC)
c) 1/√L
d) 1/(π√L)
ANSWER: B
The resonant frequency of m-derived low pass filter in terms of the cut-off frequency of low pass filter
is?
a) fc/√(1-m2 )
b) fc/√(1+m2 )
c) fc/(π√(1-m2 ))
d) fc/(π√(1+m2 ))
ANSWER: A
Given a m-derived low pass filter has cut-off frequency 1 kHz, design impedance of 400Ω and the
resonant frequency of 1100 Hz. Find the value of k.
a) 400
b) 1000
c) 1100
d) 2100
ANSWER: A
Given a m-derived low pass filter has cut-off frequency 1 kHz, design impedance of 400Ω and the
resonant frequency of 1100 Hz. Find the value of m
a) 0.216
b) 0.316
c) 0.416
d) 0.516
ANSWER: C
A. Y11
B. none of these
C. Y12
D. Y22
ANSWER: B
For finding the Z11 parameter at the input port of a two port network
ANSWER: A
A. impulse function
B. ramp function
C. gate function
D. parabolic function
ANSWER: A
A. AD-BC = 1
B. AB-CD = 1
C. AC-BD = 1
D. all of these
ANSWER:
ANSWER: A
It is possible to overcome the drawback of m-derived filter by connecting number of sections in addition
to prototype & m-derived sections with terminating __________
a. One-fourth sections
b. Half sections
d. Full sections
ANSWER: B
Which value of 'm' is selected in a composite filter, while connecting the terminating sections in order to
acquire proper impedance matching and constant characteristic impedance throughout the passband?
a. 0.3
b. 0.6
c. 0.9
d. 0.12
ANSWER: B
In band elimination filter, the frequency of resonance of individual arms is geometric _________
ANSWER: A
A network either T or π, is said to be of the constant-k type if Z1 and Z2 of the network satisfy the
relation?
a) Z1Z2 = k
b) Z1Z2 = k2
c) Z1Z2 = k3
d) Z1Z2 = k4
ANSWER: B
a) √LC
b) √((L/C) )
c) √((C/L) )
d) √((1/CL) )
ANSWER: B
a) 1/√LC
b) 1/(π√LC)
c) √LC
d) π√LC
ANSWER: B
The value of α in the pass band of constant k-low pass filter is?
a) 2 cosh-1(fc/f)
b) cosh-1(fc/f)
c) cosh-1(f/fc)
d) 2 cosh-1(f/fc)
ANSWER: D
The value of β in the attenuation band of constant k-low pass filter is?
a) 0
b) π
c) π/2
d) π/4
ANSWER: B
The value of α in the attenuation band of constant k-low pass filter is?
a) α=2 cosh-1(fc/f)
b) α=cosh-1(f/fc)
c) α=2 cosh-1(f/fc)
d) α=cosh-1(fc/f)
ANSWER: C
The value of α in the pass band of constant k-low pass filter is?
a) π
b) π/4
c) π/2
d) 0
ANSWER: D
What is a filter?
ANSWER: A
What are filters created by using resistors and capacitors or inductors and capacitors called?
a) Active filters
b) Passive filters
c) Continuous filters
d) Differential filters
ANSWER:B
What type of filter produces a predictable phase shift characteristic in all frequencies?
ANSWER: D
ANSWER: B
Find the cut off frequency for an RC low pass filter of R=8.2Ω and C=0.0033μF?
a) 6KHz
b) 5.88KHz
c) 4.26KHz
d) 7.91KHz
ANSWER: B
What is the value of resistor for a high pass RC filter to produce a cutoff frequency of3.4KHz if C =
0.047μF?
a) 654Ω
b) 1000Ω
c) 996Ω
d) 752Ω
ANSWER:C
What is the loss the filter introduces to the signals in the passband called?
a) passband loss
b) Insertion loss
c) Attenuation
d) Degradation
ANSWER: B
What is the component in which the output voltage is higher than the input voltage?
a) Attenuator
b) Amplifier
c) Differential
d) Multiplexer
ANSWER: B
What is the gain of the signal if output and input voltages are 700V and 50mV respectively?
a) 14000
b) 14
c) 71
d) 71400
ANSWER: A
What is the output signal voltage for a gain of 20 and input voltage of 20mV?
a) 400V
b) 4V
c) 400mV
d) 10V
ANSWER: C
The power output of an amplifier is 7 watts. The power gain is 80. What is the input power?
a) 87.5mW
b) 87.5W
c) 13W
d) 13mW
ANSWER: A
What is the total gain of amplifiers with a power gain of 6, 8, 5 when connected in series?
a) 24
b) 20
c) 19
d) 240
ANSWER: D
The value of resonant frequency in the m-derived low pass filter is?
a) fr=1/(√(LC(1+m2 ) ))
b) fr=1/(√(πLC(1+m2 ) ))
c) fr=1/(√(LC(1-m2 ) ))
d) fr=1/(√(πLC(1-m2 ) ))
ANSWER: D
a) 1/√LC
b) 1/(π√LC)
c) 1/√L
d) 1/(π√L)
ANSWER: B
The resonant frequency of m-derived low pass filter in terms of the cut-off frequency of low pass filter is
a) fc/√(1-m2 )
b) fc/√(1+m2 )
c) fc/(π√(1-m2 ))
d) fc/(π√(1+m2 ))
ANSWER: A
Given a m-derived low pass filter has cut-off frequency 1 kHz, design impedance of 400Ω and the
resonant frequency of 1100 Hz Find the value of k
a) 400
b) 1000
c) 1100
d) 2100
ANSWER: A
Given a m-derived low pass filter has cut-off frequency 1 kHz design impedance of 400Ω and the
resonant frequency of 1100 Hz Find the value of m
a) 0.216
b) 0.316
c) 0.416
d) 0.516
ANSWER: C
ANSWER: B
ZoT = 3 ZoT
d) ZoT = 4 ZOt
d)ZoT = 4 ZOt
a) LESS
b) More
c) Both
d) None of the above
Q4.
a) -16 cos 2t V
b) 16 cos 2t V
c) None of the above
d) NOT
a) 1mh
b) 2mh
c) 14mh
d) 5.85 mh
a) 14mh
b) 6mh
c) 15.5 mh
d) 14.5mh
Q8. Given a m-derived low pass filter has cut-off frequency 1 kHz,
design impedance of 400Ω and the resonant frequency of 1100 Hz.
Find the value of m
a)0.216
b) 0.316
c) 0.416
d) 0.516
a)zero
b) unity
c) unpredctible
d) not