Professional Documents
Culture Documents
AGQ200A4H - Mini Relé PDF
AGQ200A4H - Mini Relé PDF
ULTRA-SMALL PACKAGE
FLAT POLARIZED RELAY GQ-RELAYS
FEATURES
• Compact flat body saves space Due to highly efficient magnetic circuit de-
With a small footprint of 10.6 mm (L) × 7.2 sign, leakage flux is reduced and changes
10.60±0.3
7.20±0.3
.283±.012 mm (W) .417 inch (L) × .283 inch (W) for in electrical characteristics from compo-
.417±.012 5.20±0.2 space savings, it also has a very short nents being mounted close-together are
.205±.008
height of 5.2 mm .205 inch. (Standard PC minimized. This all means a packaging
board type.) density higher than ever before.
• Outstanding surge resistance. • Nominal operating power: 140 mW
Surge withstand between open contacts: • Outstanding vibration and shock re-
7.20±0.3 1,500 V 10×160 µs (FCC part 68) sistance.
10.60±0.3 .283±.012
.417±.012 Surge withstand between contacts and Functional shock resistance:
coil: 2,500 V 2×10 µs (Bellcore)
Max.5.40
.213 750 m/s2 {75G}
• The use of twin crossbar contacts en- Destructive shock resistance:
sures high contact reliability. 1,000 m/s2 {100G}
AgPd contact is used because of its good Functional vibration resistance:
mm inch sulfide resistance. Adopting low-gas 10 to 55 Hz (at double amplitude of 3.3
molding material. Coil assembly molding mm .130 inch)
technology which avoids generating vola- Destructive vibration resistance:
tile gas from coil. 10 to 55 Hz (at double amplitude of 5 mm
• Increased packaging density .197 inch)
SPECIFICATIONS
Contact Characteristics
Arrangement 2 Form C Initial insulation resistance*1 Min. 1,000MΩ (at 500V DC)
Initial contact resistance, max. Between open contacts 750 Vrms for 1min.
100 mΩ Initial
(By voltage drop 6 V DC 1A ) breakdown Between contact sets 1,000 Vrms for 1min.
Stationary: AgPd+Au clad voltage*2 Between contacts and coil 1,500 Vrms for 1min.
Contact material
Movable: AgPd
Between open contacts
Nominal switching capacity 1 A 30 V DC 1,500 V(FCC Part 68)
Initial surge (10×160 µs)
(resistive load) 0.3 A 125 V AC
voltage Between contacts and coil
Max. switching power 2,500 V(Bellcore)
30 W, 37.5 V A (2×10 µs)
Rating (resistive load)
Max. 4 ms (Approx. 2 ms)
Max. switching voltage 110 V DC, 125 V AC Operate time [Set time]*3 (at 20°C)
[Max. 4 ms (Approx. 2 ms)]
Max. switching current 1A Release time (without diode) Max. 4 ms (Approx. 1 ms)
Min. switching capacity ❇1 10 µA 10 mV DC [Reset time]*3 (at 20°C) [Max. 4 ms (Approx. 2 ms)]
140mW (1.5 to 12 V DC) Temperature rise*4 (at 20°C) Max. 50°C
Nominal Single side stable
230mW (24 V DC) Functional*5 Min. 750 m/s2{75G]
operating Shock resistance
power 100mW (1.5 to 12 V DC) Destructive*6 Min. 1,000 m/s2{100G]
1 coil latching
120mW (24 V DC)
10 to 55 Hz at double
Mechanical (at 180 cpm) 5 × 107 Functional*7
amplitude of 3.3 mm
Expected 1 A 30 V DC Vibration resistance
105 10 to 55 Hz at double
life (min. Electrical resistive Destructive
amplitude of 5 mm
operations) (at 20 cpm) 0.3 A 125 V AC
105 Conditions for opera- Ambient –40°C to 85°C
resistive tion, transport and temperature ❇2 –40°F to 185°F
Remarks: storage*8
* Specifications will vary with foreign standards certification ratings. (Not freezing and con-
*1 Measurement at same location as "Initial breakdown voltage" section. densing at low tem- Humidity 5 to 85% R.H.
*2 Detection current: 10mA. perature)
*3 Nominal voltage applied to the coil, excluding contact bounce time.
*4 By resistive method, nominal voltage applied to the coil; contact carrying current: Unit weight Approx. 1 g .035 oz
1 A. Notes:
*5 Half-wave pulse of sine wave: 6 ms;detection time: 10µs. ❇1 This value can change due to the switching frequency, environmental conditions,
* Half-wave pulse of sine wave: 6 ms.
6
and desired reliability level, therefore it is recommended to check this with the
*7 Detection time: 10µs. actual load.
*8 Refer to 5. Conditions for operation, transport and storage mentioned in ❇2 The upper limit for the ambient temperature is the maximum temperature that
AMBIENT ENVIRONMENT (Page 61) can satisfy the coil temperature rise. Under the packing condition, allowable
temperature range is from –40 to +70°C –40° to +158°F.
129
GQ
TYPICAL APPLICATIONS
• Telephone exchange, transmission • Home appliances, and audio/visual
equipment equipment
• Communications devices • Handheld and portable products
• Measurement devices
ORDERING INFORMATION
Ex. AGQ 2 0 0 A 1 H Z
Contact arrangement Operating function Type of operation Terminal shape Coil voltage (DC) Packing style
2: 2 Form C 0: Single side stable 0: Standard type Nil: Standard PC board terminal 1H: 1.5V 09 : 9V Nil: Tube packing
1: 1 coil latching (B.B.M.) A: Surface-mount terminal A type 03 : 3V 12 : 12V Z: Tape and reel packing
S: Surface-mount terminal S type 4H: 4.5V 24 : 24V (piked from 5/6/7/8
06 : 6V pin side)
Note: Tape and reel packing symbol “-Z” is not marked on the relay. “X” type tape and reel packing (picked from 1/2/3/4-pin side) is also available. Suffix “X” instead of “Z”.
130
GQ
Part No. Reset Nominal Nominal Max.
Set voltage, Coil
Operating Coil Rating, voltage, operating operating allowable
Tape and reel V DC (max.) resistance,
Function Tube packing V DC V DC (max.) current, power, voltage,
packing (initial) Ω (±10%)
(initial) mA (±10%) mW V DC
AGQ210❍1H AGQ210❍1HZ 1.5 1.13 1.13 66.7 22.5 100 2.25
AGQ210❍03 AGQ210❍03Z 3 2.25 2.25 33.3 90 100 4.5
AGQ210❍4H AGQ210❍4HZ 4.5 3.38 3.38 22.2 202.5 100 6.75
1 coil
AGQ210❍06 AGQ210❍06Z 6 4.5 4.5 16.7 360 100 9
latching
AGQ210❍09 AGQ210❍09Z 9 6.75 6.75 11.1 810 100 13.5
AGQ210❍12 AGQ210❍12Z 12 9 9 8.3 1,440 100 18
AGQ210❍24 AGQ210❍24Z 24 18 18 5.0 4,800 120 36
❍: For each surface-mounted terminal variation, input the following letter.
A type: A, S type: S
1) Standard packing: 50 pcs.(tube), 900pcs. (tape and reel)in an inner package; 1,000 pcs.(tube), 1,800pcs. (tape and reel)in an outer package
2) Specified value of pick-up, drop-out, set and reset voltage is with the condition of square wave coil pulse.
DIMENSIONS mm inch
2. Surface-mount terminal
Suggested mounting pad Schematic (Top view)
Single side stable/ Single side stable 1 coil latcing
1) A type 1 coil latching (Deenergized condition) (Reset condition)
10.60±0.3 7.20±0.3
Max. 5.40 .417±.012 .283±.012
.213 2.20
.087 8 7 6 5 8 7 6 5
3.20
.126 2.20
.087
0.20±0.1
0.40±0.1 2.20±0.15 .008±.004 5.08±0.15 2.66 6.74
.016±.004 .087±.006 .200±.006 .105 .265 1 2 3 4 1 2 3 4
3.20±0.15 2.20±0.15 8.40±0.3
.126±.006 .087±.006 .331±.012 Direction indication Direction indication
0.80
.031
REFERENCE DATA
1. Max. switching capacity 2. Life curve
100
DC resistive load
No. of operations, × 104
AC resistive load
Switching current, A
1.0 50
40
30
DC 30V resistive load
20
0.3
AC 125V
10 resistive load
0
30 100 0.2 0.4 0.6 0.8 1.0 1.2
Contact voltage, V Switching current, A
131
GQ
NOTES
1. Coil operating power 2) Tape and reel packing
1) As a general rule, only a pure DC pow- (A type)
er supply should be used for the coil drive. (1)-1 Tape dimensions
2) To ensure proper operation, the voltage mm inch
applied to both terminals of the coil should
be ±5% (at 20°C 68°F) the rated operating
1.50 +0.1
0 dia.
Relay polarity bar .059 +.003
.0 dia. 2.00dia.
4.00 .079dia. Max. 6.55
(Z type) .256
voltage of the coil. Also, be aware that the 2.0
.079
.157
1.75
.069
0.40
.016
pick-up and drop-out voltages will fluctu- 11.5
.453 24.0±0.3
ate depending on the ambient tempera- 11.1
.437
.945±.012
For Cautions for Use, see Relay Technical Information (Page 48 to 76).
132
9/1/2000 All Rights Reserved, © Copyright Matsushita Electric Works, Ltd.
Go To Online Catalog