Professional Documents
Culture Documents
ORDERING INFORMATION
TX 2
Contact arrangement
2: 2 Form C
Surface-mount availability
Nil: Standard PC board terminal type
SA: SA type
Operating function
Nil: Single side stable
LT: 2 coil latching
Terminal shape
Nil: Standard PC board terminal or surface-mount terminal
Nominal coil voltage (DC)*
3, 4.5, 5, 6, 9, 12, 24V
Contact material
Nil: Standard contact (Ag+Au clad)
1: AgPd contact (low level load); AgPd+Au clad (stationary), AgPd (movable)
Packing style
Nil: Tube packing
X: Tape and reel (picked from 1/3/4/5-pin side)
Z: Tape and reel packing (picked from the 8/9/10/12-pin side)
Note: In case of 5 V transistor drive circuit, it is recommended to use 4.5 V type relay.
ASCTB18E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX
TYPES
1. Standard PC board terminal
Contact Nominal coil Single side stable 2 coil latching
arrangement voltage Part No. Part No.
3V DC TX2-3V TX2-LT-3V
4.5V DC TX2-4.5V TX2-LT-4.5V
5V DC TX2-5V TX2-LT-5V
2 Form C 6V DC TX2-6V TX2-LT-6V
9V DC TX2-9V TX2-LT-9V
12V DC TX2-12V TX2-LT-12V
24V DC TX2-24V TX2-LT-24V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
2. Surface-mount terminal
1) Tube packing
Contact Nominal coil Single side stable 2 coil latching
arrangement voltage Part No. Part No.
3V DC TX2SA-3V TX2SA-LT-3V
4.5V DC TX2SA-4.5V TX2SA-LT-4.5V
5V DC TX2SA-5V TX2SA-LT-5V
2c 6V DC TX2SA-6V TX2SA-LT-6V
9V DC TX2SA-9V TX2SA-LT-9V
12V DC TX2SA-12V TX2SA-LT-12V
24V DC TX2SA-24V TX2SA-LT-24V
Standard packing: Tube: 40 pcs.; Case: 1,000 pcs.
Note: Please add “-1” to the end of the part number for AgPd contacts (low level load).
RATING
1. Coil data
1) Single side stable
Nominal operating
Nominal coil Pick-up voltage Drop-out voltage Coil resistance Nominal operating Max. applied voltage
current
voltage (at 20°C 68°F) (at 20°C 68°F) [±10%] (at 20°C 68°F) power (at 20°C 68°F)
[±10%] (at 20°C 68°F)
3V DC 46.7mA 64.3Ω
4.5V DC 31mA 145Ω
5V DC 75%V or less of 10%V or more of 28.1mA 178Ω
150%V of
6V DC nominal voltage* nominal voltage* 23.3mA 257Ω 140mW
nominal voltage
9V DC (Initial) (Initial) 15.5mA 579Ω
12V DC 11.7mA 1,028Ω
24V DC 5.8mA 4,114Ω
2) 2 coil latching
Nominal operating
Coil resistance Nominal operating
Nominal coil Set voltage Reset voltage current Max. applied voltage
[±10%] (at 20°C 68°F) power
voltage (at 20°C 68°F) (at 20°C 68°F) [±10%] (at 20°C 68°F) (at 20°C 68°F
Set coil Reset coil Set coil Reset coil Set coil Reset coil
3V DC 66.7mA 66.7mA 45Ω 45Ω
4.5V DC 44.5mA 44.5mA 101.2Ω 101.2Ω
5V DC 75%V or less of 75%V or less of 40mA 40mA 125Ω 125Ω
150%V of
6V DC nominal voltage* nominal voltage* 33.3mA 33.3mA 180Ω 180Ω 200mW 200mW
nominal voltage
9V DC (Initial) (Initial) 22.2mA 22.2mA 405Ω 405Ω
12V DC 16.7mA 16.7mA 720Ω 720Ω
24V DC 8.3mA 8.3mA 2,880Ω 2,880Ω
*Pulse drive (JIS C 5442-1986)
ASCTB18E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX
2. Specifications
Characteristics Item Specifications
Arrangement 2 Form C
Initial contact resistance, max. Max. 100 mΩ (By voltage drop 6 V DC 1A)
Contact
Standard contact: Ag+Au clad,
Contact material
AgPd contact (low level load): AgPd+Au clad (stationary), AgPd (movable)
Nominal switching capacity Standard contact: 2 A 30 V DC, AgPd contact: 1 A 30 V DC (resistive load)
Max. switching power Standard contact: 60 W (DC), AgPd contact: 30 W (DC) (resistive load)
Max. switching voltage 220V DC
Rating Max. switching current Standard contact: 2 A, AgPd contact: 1 A
Min. switching capacity (Reference value)*1 10µA 10mV DC
Nominal operating Single side stable 140 mW (3 to 24 V DC)
power 2 coil latching 200 mW (3 to 24 V DC)
Insulation resistance (Initial) Min. 1,000MΩ (at 500V DC) Measurement at same location as “Initial breakdown voltage” section.
Between open contacts 1,000 Vrms for 1min. (Detection current: 10mA)
Breakdown voltage
Between contact and coil 2,000 Vrms for 1min. (Detection current: 10mA)
(Initial)
Between contact sets 1,000 Vrms for 1min. (Detection current: 10mA)
Surge breakdown Between open contacts 1,500 V (10×160µs) (FCC Part 68)
Electrical
characteristics voltage (Initial) Between contacts and coil 2,500 V (2×10µs) (Telcordia)
Max. 50°C
Temperature rise (at 20°C 68°F)
(By resistive method, nominal coil voltage applied to the coil; contact carrying current: 2A.)
Operate time [Set time] (at 20°C 68°F) Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 4 ms [Max. 4 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Release time [Reset time] (at 20°C 68°F)
(without diode)
Functional Min. 750 m/s2 (Half-wave pulse of sine wave: 6 ms; detection time: 10µs.)
Shock resistance
Mechanical Destructive Min. 1,000 m/s2 (Half-wave pulse of sine wave: 6 ms.)
characteristics Functional 10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
Vibration resistance
Destructive 10 to 55 Hz at double amplitude of 5 mm
Mechanical Min. 108 (at 180 cpm)
Expected life
Electrical Min. 105 (2 A 30 V DC resistive), 5×105 (1 A 30 V DC resistive) (at 20 cpm)
Ambient temperature: –40°C to +85°C (up to 24 V coil) –40°F to +185°F (up to 24 V coil)
Conditions for operation, transport and storage*2 [–40°C to +70°C (48 V coil) –40°F to +158°F (48 V coil)];
Conditions Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
Max. operating speed (at rated load) 20 cpm
Unit weight Approx. 2 g .071 oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (AgPd contact type is available for low level load switching [10V DC, 10mA max. level])
*2 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24).
REFERENCE DATA
1. Maximum switching capacity 2. Life curve 3. Mechanical life
Tested sample: TX2-5V, 10 pcs.
Operating speed: 180 cpm
100
Ratio against the rated voltage, %V
3.0 90
2.0
Switching current, A
100 80
Pick-up voltage
No. of operations ×104
70 Max.
DC resistive load
1.0 50 Min.
60
30 30V DC 50
0.5 resistive load
0.4 20 40
0.3 30
Drop-out voltage
0.2 10 20 Max.
10 Min.
0 0
0 20 30 50 100 200 300 1.0 2.0 10 100 1,000 10,000
Contact voltage, V Switching current, A No. of operations, ×104
+25°C +77°F
90 90 +85°C +185°F
Contact resistance, mΩ
60
Temperature rise, °C
80 80
Pick-up voltage
70 Max. 70 50
60 Min. 60
40
50 50
2A
40 40 Max. 30
2A
Drop-out voltage
Max. 0A
30 30 Min. 20
0A
20 20
Min. 10
10 10
0 0 0
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10 100 110 120 130 140 150
No. of operations, ×10 No. of operations, ×10
4 4
Coil applied voltage, %
ASCTB18E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX
6-(1). Operate and release time (with diode) 6-(2). Operate and release time (without diode) 7. Ambient temperature characteristics
Tested sample: TX2-5V, 10 pcs. Tested sample: TX2-5V, 10 pcs. Tested sample: TX2-5V, 5 pcs.
5 5
Rate of change, %
Operate time Operate time
Operate and release time, ms
40
8-(1). High frequency characteristics 8-(2). High frequency characteristics 9. Malfunctional shock (single side stable)
(Isolation) (Insertion loss) Tested sample: TX2-5V, 6 pcs.
Tested sample: TX2-12V, 2 pcs. Tested sample: TX2-12V, 2 pcs.
Y'
Insertion loss, dB
X Z
Isolation, dB
100
1000m/s2 1000m/s2
1.0
0.8
0.2 1000m/s 2
Y'
5 ON ON 5 ON
Pick-up voltage Pick-up voltage
0 0
ON
–5 ON –5
ON
Rate of change, %
Rate of change, %
90 90
Contact resistance, mΩ
Circuit 80
Pick-up voltage
80
Max.
70 Min. 70
458 Ω
+ 60 60
0.08 0.08
µF µF 50 50
48V DC 4 Max.
TX 40 40
3
– 30 Drop-out voltage
Max.
30 Min.
458 Ω
Wire spring relay 20 20
Min.
10 10
0 0
10 20 30 40 50 10 20 30 40 50
No. of operation, ×10
4
No. of operations, ×104
Note: Data of surface-mount type are the same as those of PC board terminal type.
ASCTB18E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX
DIMENSIONS (mm inch) The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
1. Standard PC board terminal and Self clinching terminal
CAD Data Single side stable type 2 coil latching type
External dimensions External dimensions
Standard PC board terminal Standard PC board terminal
15.00 7.40 15.00 7.40
.591 .291 .591 .291
0.65 0.65
.026 8.20 .026 8.20
.323 .323
0.50 0.50
.020 0.25 .020 0.25
1.15 5.08 2.54 3.50 5.08 .010 1.15 5.08 2.54
.045 .200 .100 .138 .200
3.50 5.08 .010
.045 .200 .100 .138 .200
PC board pattern Schematic (Bottom view) PC board pattern Schematic (Bottom view)
(Bottom view) Single side stable (Bottom view) 2 coil latching
10.16 1 3 4 5 12.7
.400 .500 1 3 4 5 6
2.54 + 2.54 + +
.100 .100
5.08 5.08
.200 – .200
– 12 –
12 10 9 8 10 9 8 7
8-1.0 dia. 10-1.0 dia.
8-.039 dia. Direction indication 10-.039 dia. Direction indication
Tolerance: ±0.1 ±.004 (Deenergized condition) Tolerance: ±0.1 ±.004 (Reset condition)
2. Surface-mount terminal
CAD Data
External dimensions (General tolerance: ±0.3 ±.012) Suggested mounting pad (Top view) (Tolerance: ±0.1 ±.004)
Type
Single side stable type 2 coil latching type Single side stable type 2 coil latching type
15 7.4 15 7.4 5.08 2.54 5.08
.591 .291 .591 .291 .200 .100 2.54
1
3.16 .039 1 .200 .100
.124 3.16 .039
8.2 8.4 8.2 8.4 .124
.323 .331 .323 .331
SA type 0.25 0.25
.010 .010 7.24 7.24
0.65 5.08 0.65 5.08 .285 .285
0.5 .026 .200 0.5 .026 .200
.020 5.08 2.54 9.4±0.5 .020 5.08 2.54 9.4±0.5
.200 .100 .370±.020 .200 .100 .370±.020
+ + +
1 3 4 5 1 3 4 5 6
Direction indication Direction indication
ASCTB18E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
TX
NOTES
1. Packing style 2. Automatic insertion
1) The relay is packed in a tube with the To maintain the internal function of the
relay orientation mark on the left side, as relay, the chucking pressure should not
shown in the figure below. exceed the values below.
Orientation (indicates PIN No.1) stripe
Chucking pressure in the direction A:
4.9 N {500gf} or less
Chucking pressure in the direction B:
9.8 N {1 kgf} or less
Chucking pressure in the direction C:
Stopper (gray) Stopper (green) 9.8 N {1 kgf} or less
2) Tape and reel packing (surface-mount C B
A
terminal type)
(1) Tape dimensions
mm inch
+0.1
1.5 0 dia.
Relay polarity bar .059 +.004
dia. 2.0 1.75
(Z type)
0 4.0 0.4
.079 .157 .069 .016
A
C
B 11.5
Please chuck the portion.
.453 15.5
.610 Avoid chucking the center of the relay.
D
16.0 10.0 .394 24.0 ±0.3
In addition, excessive chucking pressure
Relays .630 ±0.2
.945 ±.012 9.2±.008
.362 to the pinpoint of the relay should be
Tape coming out direction avoided.
(2) Dimensions of plastic reel
mm inch For general cautions for use,
please refer to the “Cautions for
use of Signal Relays” or “General
2.0
.079 Application Guidelines”.
380 dia.
13 dia. 21 dia. 14.961 dia.
.512 dia. .827 dia.
80 dia.
3.150 dia.
ASCTB18E 201209-T
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/