Professional Documents
Culture Documents
01
Subject: Water Management Engineering
(AE-408L)
Title: To Design a lined Rectangular water course using watersoft
software
Submitted By
Submitted To
Engr. Khuram sheraz
Dated: 17-05-2020
By using the survey data available in the WaterSoft software already provided to you, design a
lined rectangular watercourse and submit an online report (in pdf format) including the following
three sections:
1. Title Page
2. Design Worksheet
3. Profile Map
Procedure:
First of all open the watersoft software.
After this go to the survey sheet and copy the stations data, reduced levels (D.B) and
reduced level of high field levels and paste in another excel sheet.
Now go back again to the software select rectangular watercourse and then click ok.
After this a new sheet will appear now copy that data of survey sheet and paste in that
new sheet.
After this click on design worksheet then a new data sheet will appear now click on input
data and copy the station data and paste in column of station in design worksheet.
Now all the calculation will be done automatically.
Now write the first value of reduced level and scroll it down then the remaining
calculation will be done automatically.
Now click on run button to activate the data and then click on show graph then the profile
map of the watercourse will be made.
Now the head between the FSL and highest field level is 10 to 15%.
If sufficient head is available between the highest field level and the design FSL then add
a drop structure to reduce the amount of fill.
2. Design Worksheet:
Table 1.1
Table 1.2
3. Profile map
Graph 1.1