Professional Documents
Culture Documents
automatus 2020
Ladder Programming Task – 10th June 2020
1)When pressed once the output should turn on and when pressed for the second
time the output should turn off (using only one contact and one coil).
2)Program a 3-output sequencer that turns on each output for 5 secs in a loop.
4)Program a logic for tank filling process in which a filling valve opens and drain valve
closes when low level is detected and drain valve opens and filling valve closes when
high level is detected (here the levels are measured using a level transmitter) and also
indicate the low level and high level alarm on the LCD screen.
5)Program a logic for a plant watering system to water the plant on Monday,
Wednesday and Friday at 9am and on Sunday, Tuesday, Thursdays and Saturday at
7pm. The water system should run for half an hour.