Professional Documents
Culture Documents
INDEX
Page
Core Design 1
Fitting Instructions 2
Heat Exchangers 6
Accessories 14
Drivetech Tools 15
© Motospecs 2016
Warranty
TECHNICAL SUPPORT
Motospecs is focused on customer satisfaction and providing quality parts to the
market. It has a strong portfolio of innovative product brands and prides itself on broad
availability of parts coverage for most makes & models, competitive pricing and high
order fill. Motospecs prides itself on customer service and technical expertise.
Wherever you are in Australia or New Zealand, Drivetech sales and technical support
is only a phone call away.
WARRANTY
Motospecs recognises the importance of customer confidence and satisfaction in the
quality of its products. All Drivetech parts are warranted against defects in workmanship
or material for a period of 12 months from the date of sale, unless otherwise stated.
Drivetech parts found upon examination by an authorised Motospecs representative to
be defective in material or workmanship will be replaced by Motospecs. The cost of
returning parts under the warranty must be borne by the customer and must be
pre-paid. In order to make a claim under this warranty, the faulty product, proof of
purchase and the reason for or details of the failure must be provided to Motospecs.
This warranty does not cover damage by misuse or improper installation, or liability for
labour charges or consequential loss or damage incurred as a result of the failure of a
Drivetech part.
COPYRIGHT NOTICE
Motospecs, a division of GPC Asia Pacific abn 97 97 993 283 is the owner of copyright
of this publication, including layout, drawings, photographs, text and part number
systems. No part of this catalogue may be reproduced or copied in any form or by any
means without the prior written permission of Motospecs. This catalogue has been
prepared for the Australian market. Due to vehicle production changes and
supersessions, you should ensure that the part you are selecting is suitable for your
application.
© Motospecs 2016
Core Designs
1. The mounting of cooler cores should be as secure as possible to minimise any form of strain or load
being placed on the core itself.
2. The core should be positioned to take maximum advantage of the air flow available.
3. Where the core is placed ahead of the engine or air conditioning radiators, the gap between the cooler
core and the radiator should be kept to a minimum ie :1/4" (6mm), or the air flow will tend to go around the
core instead of through it.
4. Hoses should be routed to obtain the largest possible radius in any bend to avoid kinking or possible
flow restrictions. Hose movement should be minimised via the use of plastic ties. Contact with sharp
edges or corners must be avoided,and where necessary, suitable protection installed. ie: padding /
protective sleeve.
5. Where applicable, spanner support of the hexagonal sections when tightening screw fittings MUST be
used to ensure leak free operation. Avoid over tightening tapered thread fittings, as this may split the threaded
cooler ports.
6. A non-hardening sealer is recommended for use on the threads of screw in fittings, avoid using thread
tape as it is possible for of sections of the tape to enter the oil flow path.
7. Where applicable, all necessary precautions should be taken during the fitting operation regarding air
bag deployment switches. Refer to the vehicle manufacturers Service Manual.
8. Cooler core efficiency can be increased by approximately 25%, at speed by the fabrication and installation
of a forward facing cowling to capture and force feed air through the core.
9. Where the cutting of pipes is deemed necessary for the installation of a cooler,a pipe cutter MUST be
used to avoid sharp edges which will damage the hose internally, and create swarf which may enter the
oil flow path.
Due to the positioning of the Intercooler, these kits are not suitable for use in Ford Turbocharged vehicles
Height x Width x
Application Fitment Mount Part No
Thickness
Ford Falcon EA-ED 6 Cyl/V8 - 4 Speed 184 x 280 x 19mm Series Soft Mount 0555-334460
Ford Falcon AU-BA 6 Cyl/V8 - 4 Speed 184 x 280 x 19mm Series/Bypass Solid Mount 0555-340461
Ford Falcon AU-BA 6 Cyl/V8 - 4 Speed 184 x 280 x 19mm Series Button/Tie 0555-334882
Ford Falcon BF 6 Cyl/V8 - 4 Speed 184 x 280 x 19mm Bypass Solid Mount 13837606
Ford Falcon BF 6 Cyl/V8 - 6 Speed 184 x 280 x 19mm Bypass Solid Mount 13837607
Ford Falcon FG 6 Cyl - 4 Speed 184 x 280 x 19mm Bypass Solid Mount 13837604
Ford Falcon FG, Territory SX/SY 6 Cyl 4/6 Speed - Steel pipe kit - Refer Accessory page (14) for details 13837600-CP
Ford Falcon FG 6 Cyl - 6 Speed to 6/2011 184 x 280 x 19mm Bypass Solid Mount 13837600
Ford Falcon FG 6 Cyl - 6 Speed from 7/2011 Additional Bracket Kit required to install 13837600 Kit 13837601
Ford Falcon FG 6 Cyl - 5 Speed 184 x 280 x 19mm Bypass Solid Mount 13837650
Ford Territory SY 6 Cyl - 6 Speed 184 x 280 x 19mm Bypass Solid Mount 13837700
Ford Territory SX/SY 6 Cyl - 4 Speed 184 x 280 x 19mm Bypass Solid Mount 13837704
Ford Territory SZ 6 Cyl - 6 Speed 184 x 280 x 19mm Bypass Solid Mount 13837710
Holden Colorado RG 2.8 Diesel - 6 Speed 184 x 280 x 19mm Series Solid Mount 13829720
Holden Commodore VT-VY Series I 184 x 280 x 19mm Series/Bypass Solid Mount 0555-340459
Holden Commodore VY Series II-VZ 184 x 280 x 19mm Series/Bypass Solid Mount 0555-340460
Holden Commodore VE/VF - 4/5/6 Speed 184 x 280 x 19mm Series/Bypass Solid Mount 13833800
Toyota Prado KDJ150 Diesel 3Ltr 09- 184 x 280 x 19mm Bypass Solid Mount 13865850
Toyota Prado GDJ150, 6 Speed 2015 184 x 280 x 19mm Bypass Solid Mount 13865850
Toyota Hilux KUN26 Diesel 2/05 - 10/13 184 x 280 x 19mm Series/Bypass Solid Mount 13865325
Height x Width x
Application Fitment Mount Part No
Thickness
Ford Falcon AU-BA 260 x 422 x 19mm Series/Bypass Solid Mount 13837500
Ford Falcon AU-BA Retail Pack 260 x 422 x 19mm Series/Bypass Solid Mount 13837505
Holden Commodore VT / VX Series 1 & 2 261 x 422 x 19mm Series/Bypass Solid Mount 13833600
Holden Commodore VY2-VZ 262 x 422 x 19mm Series/Bypass Solid Mount 13833610
Height x Width x
Type Core Type Barb Size Mount Part No
Thickness
Low Pressure Drop 101 x 280 x 19mm SP/LPD 8.7mm Button/Tie 0555-334233
Small 152 x 100 x 19mm SP 9.5mm Button/Tie 0555-334726
Medium 146 x 280 x 19mm SP 8.7mm Button/Tie 0555-334373
Large 184 x 280 x 19mm SP 9.5mm Button/Tie 0555-334517
Heavy Duty 304 x 280 x 19mm SP 8.7mm Button/Tie 0555-340371
Height x Width x
Type Core Type Barb Size Mount Part No
Thickness
Medium 240 x 280x 19mm Plate & Fin 9.5mm Button/Tie OC-1678
Large 280 x 280x 19mm Plate & Fin 9.5mm Button/Tie OC-1679
Kits include the following parts as required, OEM spec high temperature oil hose, nylon
mounting rods, insta-dapt 2-way radiator adapter, stainless steel hose clamps and installation
instructions.
Height x Width x
Type * BTU / HR CoreType / Barb Part No.
Thickness
Low Pressure Drop 101 x 280 x 19mm 7,500 SP/LPD - 8.7mm 0555-360154
Small 152 x 100 x 19mm 4,300 SP - 9.5mm 0555-331266
Medium 146 x 280 x 19mm 10,300 SP - 9.5mm 703-4452
Large 184 x 280 x 19mm 13,500 SP - 9.5mm 0555-331918
H/Duty 304 x 280 x 19mm 21,500 SP - 8.7mm 0555-331019
* British Thermal Units per Hour = Heat Rejection Typical Application
* Core Type; SP = Stacked Plate, PF = Plate & Finn, TF= Tube & Fin, LPD = Low Pressure Drop
Application
Ford Falcon FG 6 Cyl 4 & 5 Speed
Application
Ford Falcon FG 6 Cyl 6 Speed
Application Part No
Ford Falcon BA/BF 6 Cyl 13837660
Ford Territory
Ford Falcon BA/BF 6 Cyl Turbo 13837665
Kits include high quality oil hose, mounting screws, nuts and hose clamps.
The Electra-cool Remote Cooler combines a copper/aluminum core with a high flow Tornado
electric fan for maximum cooling in any environment. Cooler cores have 10mm -6 AN, hose
barb adapters are included if not using AN hose. Cooler kits include fan, cooler core and
aluminum brackets.
139156 - The In-Line fan thermostat is a clean and simple way to control the electric fan on remote coolers.
Designed to thread onto the AN inlets of Derale Cooler cores, the kit also includes hose barb adapters that allow
you to mount it on any cooling line with any brand cooler.
139151 - Temperature Probe inserts into Engine Radiator core. Includes Relay, Wiring Harness, electrical
connectiors, wire joiners and securing ties
• Preset turn-on 82.2C (180°F) - turn-off 73.9C (165°F)
• Aluminum housing -6 AN
• Brass hose barb fittings included
• Maximun Switch Capacity 15 amps
139156 138151
© Motospecs 2016 Page 8
Power Steering Oil Coolers
High under bonnet temperatures and tough Australian conditions can be tough on power
steering systems. Extreme oil temperatures degrade power steering fluid, decreases the life of
seals and increases wear on parts.
Steering Oil Cooler Kits come equipped with all items needed to install the cooler in virtually any
vehicle. All items including hose are of the highest quality to ensure safe operation.
Drivetech
Height x Width x Thickness Barb Size * Core Type Core Part Number Kit Part No.
103 x 102 x 19mm 9.5mm SP 0555-335224 0555-334520
Derale
Engine Coolers
Anti-clog design maintains maximum air flow through the cooler core at all times.
Lightweight durable aluminum construction.
Kits include high quality oil hose, mounting bolts & nuts, Universal Mounting Plates, Hose
Clamps and Hose Barb fittings for the Cooler Core and Sandwich Plate.
Height x Width x Thickness Plates BTU / HR* Core No. Kit No.
70 x 280 x 38mm 24 7,500 0555-331015 0555-331015K
146 x 280 x 38mm 48 15,000 0555-331016 0555-331016K
203 x 280 x 38mm 72 20,500 0555-331017 0555-331017K
* British Thermal Units per Hour = Heat Rejection Typical Application
Fitting 1/2" NPT x 1/2" Barb Tail - To use with Engine Oil Coolers Part No 0555-331761
Sandwich Plate
Sandwich Adapters provide external oil lines for oil coolers and retain the factory oil filter location.
Part No
0555-331810
Fitting 3/8" NPT x 1/2" Barb Tail - To use with Sandwich Plates Part No 0555-331760
© Motospecs 2016 Page 10
Drivetech Sandwich Plate
Quick Reference Application Listing
To identify the required Sandwich Plate - select the vehicle make then select vehicle model oil filter number
FILTER
VEHICLE PART NO.
THREAD
Alfa Romeo
Filter Types - Z89A, Z421 3/4" X 16UNF 0555-334380
Audi
Filter Types - Z63, Z89A, Z553 3/4" X 16UNF 0555-334380
BMW
Filter Types - Z63, Z418 3/4" X 16UNF 0555-334380
Chrysler
Filter Types - Z89A, Z418, Z9 3/4" X 16UNF 0555-334380
Filter Types - Z56B M20 X 1.5MM 0555-334382
Citroen
Filter Types - Z305 M20 X 1.5MM 0555-334382
Daewoo
Filter Types - Z443 3/4" X 16UNF 0555-334380
Daihatsu
Filter Types - Z125, Z386, Z443, Z68, Z89A, Z9 3/4" X 16UNF 0555-334380
Datsun (Nissan)
Filter Types - Z115, Z145A, Z37 3/4" X 16UNF 0555-334380
Ford
Filter Types - Z10, Z115, Z145A, Z170, Z418, Z62, Z63, Z89A, Z9 3/4" X 16UNF 0555-334380
Filter Types - Z142A, Z150, Z155X, Z330, Z411, Z429, Z436, Z499, Z516, Z56B, Z79A M20 X 1.5 0555-334382
Holden
Filter Types - Z386, Z418, Z145A, Z125, Z158 3/4" X 16UNF 0555-334380
Filter Types - Z30, Z24, Z160, Z40 13/16" X 16UNS 0555-334381
Filter Types - Z56B, Z178A, ZZ142A M20 X 1.5MM 0555-334382
Isuzu
Filter Types - Z155X M20 X 1.5 0555-334382
Jeep
Filter Types - Z418, Z89A 3/4" X 16UNF 0555-334380
Kia
Filter Types - Z150, Z411, Z429, Z436 M20 X 1.5 0555-334382
Land Rover
Filter Types - Z9, Z89A 3/4" X 16UNF 0555-334380
Filter Types - Z585, Z587 13/16" X 16UNF 0555-334381
Lexus
Filter Types - Z418 3/4" X 16UNF 0555-334380
Mazda
Filter Types - Z9 3/4" X 16UNF 0555-334380
Filter Types - Z142, Z155X, Z411, Z429, Z436, Z56B, Z330 M20 X 1.5 0555-334382
Filter Types - Z516 M22 X 1.5 0555-361680
To identify the required Sandwich Plate - select the vehicle make then select vehicle model oil filter number
FILTER
VEHICLE PART NO.
THREAD
Mercedes Benz
Filter Types - Z423 3/4" X 16UNF 0555-334380
MGB
Filter Types - Z38 3/4" X 16UNF 0555-334380
Filter Types - Z585 13/16" X 16UNF 0555-334381
Mitsubishi
Filter Types - Z142A, Z411, Z436, Z56B M20 X 1.5 0555-334382
Morris
Filter Types - Z418 3/4" X 16UNF 0555-334380
Nissan
Filter Types - Z115, Z134, Z145A, Z170, Z37, Z442, Z503, Z89A, Z9 3/4" X 16UNF 0555-334380
Peugeot
Filter Types - Z142A, Z305 M20 X 1.5 0555-334382
Proton
Filter Types - Z411, Z142A M20 X 1.5 0555-334382
Range Rover
Filter Types - Z38, Z89A, Z9 3/4" X 16UNF 0555-334380
Filter Types - Z30, Z97A 13/16" X 16UNS 0555-334381
Saab
Filter Types - Z418 3/4" X 16UNF 0555-334380
Seat
Filter Types - Z553 3/4" X 16UNF 0555-334380
Subaru
Filter Types - Z436 M20 X 1.5 0555-334382
Suzuki
Filter Types - Z125, Z386, Z418 3/4" X 16UNF 0555-334380
Toyota
Filter Types - Z10, Z131A, Z158, Z37, Z386, Z418, Z68, Z89A, Z9 3/4" X 16UNF 0555-334380
Volkswagen
Filter Types - Z63, Z553, Z89A 3/4" X 16UNF 0555-334380
Filter Mounts
A Filter Mount allows the engine oil filter to be mounted anywhere. It is available in single or
dual filtration configuration.
• 1/2" NPT ports left & right
• Designed to a use Z9 Filter
• Dual Mount, Doubles Filtration Capacity
• Universal fit with 3 bolt heavy duty mounting plate
Part No.
Part No
Single Filter Mount 0555-331809
0555-331809
Dual Filter Mount 0555-331811
Fitting - 1/2" NPT x 1/2" Barb Tail - to use with Filter Mountings0555-331761
Spin-on Adaptors
A Spin-on Adapter is used to provide external oil lines for remote filter mounts and oil coolers.
Fitting - 1/2" NPT x 1/2" Barb Tail - use with Spin-on Adaptors 0555-331761
Fitting - 3/8" NPT x 1/2" Barb Tail - to use with Oil Thermostat installation 0555-331760
© Motospecs 2016 Page 13
Accessories
Check Valves
Locates in Cooler Line. Stops Converter Drain Back. 5/16" 139199
Double
Fittings & Barbs Ended
Hose
3/8" Double Ended Barb Hose Joiner 0555-331909
Joiner
Male
Inverted 16 x 1.5mm M Inverted Flare to 10mm Hose Barb 139295
Flare 16 x 1.5mm F Inverted Flare to 10mm Hose Barb 139296
16 x 1.5mm F Inverted Flare to 8mm Hose Barb 0555-331930 Female
5/8"-18 M Inverted Flare to 10mm Hose Barb 139395 Inverted
Flare
5/8"-18 F Inverted Flare to 10mm Hose Barb 139396
Piping Cooler Pipe Steel (5/16 X 60 in) Double Flare Ends 139205
Cooler Pipe Steel (3/8 X 60 in) Double Flare Ends 139206
Cooler Pipe Kit (FG Falcon & Territory) 13837600-CP
Mountings
Solid Mount Kit Universal, Solid Mounting 0555-334237
Easy Mount Kit Universal Soft Mount, 4 Button & Tie Sets, Clamps, Pads, Fitting 0555-334232
Isomount Rubber, studded both sides 1/4" Whitworth 0555-331730
Soft Mount Button & Tie Set 0555-331822
Hose Clamps Hose Clamp 6-16mm MH004 Worm Drive Pack of 10 900616
Hose Clamp 11-22mm MH006 Worm Drive 0555-334032
Hose Clamp 11-22mm MH006 Worm Drive Pack of 10 900822
Hose Clamp 14-16mm EFI Hose, rolled edges Nut & Bolt 901416
Temperature Pick Up
Infrared
UXT-10200