You are on page 1of 1

RUBINETTERIE UTENSILERIE BONOMI SRL

VIA PADANA SUPERIORE 27/29 FRAZ. CILIVERGHE 25080 MAZZANO (BS) ITALY
www.rubvalves.com - sales@rubvalves.com | Tel.: +39 030 212441 Fax: +39 030 2629498
Società soggetta ad attività di direzione e coordinamento di HADRON SRL

Page 1 / 1

TEST REPORT 2.2 EN 10204


(MOD.10.004.01 Rev.1)

Nr. 032 / 2018 dated 21/ 05 / 2018

Customer: DINCORSA S.R.L.


Address and contact person: JR. MARISCAL LUZURIAGA 544, JESUS MARIA LIMA,
PE-11
Order nr.: 033-2017 dated: 20/12/2017
Invoice nr.: 201830101 dated: 16/03/2018
Product supplied
Rubinetterie Utensilerie Bonomi Srl Customer’s Quantity
product id description Product id. supplied
S92D41 BALL VALVE S.92 ½” FIP-FIP - 7040
S92E41 BALL VALVE S.92 ¾” FIP-FIP - 1546
S92F41 BALL VALVE S.92 1” FIP-FIP - 389
S92G41 BALL VALVE S.92 1.¼” FIP –FIP - 128
S92H41 BALL VALVE S.92 1.½” FIP-FIP - 359
Tests carried out
We declare that the products supplied have favorably passed the tests listed here below, as applicable:
1. Seal test: complying with the prescriptions. Checked, with favorable results, 100% of the products supplied.
2. Dimensional verification: in-line dimensional inspections on sample batches comply with the prescriptions of the reference
drawing.
3. Visual inspection: the sample batches checked during production do not show any visual defect as burrs, dents, spots, nor
any other surface defect.
Marking comply with the prescriptions and are clearly readable.
4. Raw materials: the chemical analysis and the physical characteristics of raw materials used, comply with the prescriptions of
the reference norms.
5. Life test: upon completion of engineering project, valves have passed a validation test prescribing 25.000 open/close cycles
under pressure
The a.m. products are manufactured in compliance with technical delivery conditions according to our official catalogue and
conform to the prescriptions of RuB Management Quality System.
The Management Quality System of RuB is certified according to ISO 9001:2008 by Lloyd’s Register Certification, approval
certificate nr. 160235.
Document issued by computerized controlled system, valid as signature of approval

This document contains information that may be confidential and which may be subject to privilege. If you have received this message in error,
please notify us immediately by facsimile or telephone confirming the original information in your hands has been destroyed.
If you are not the intended recipient, you must not peruse, use, disseminate, distribute or copy this information.
If you are the intended recipient, you are still bond to confidentiality and secrecy for all information bearing the mark “CONFIDENTIAL”.
Numero REA BS 103805 - MEC. BS 010832 - Registro Imprese di Brescia - COD. FISC. e P.IVA IT00300000171 - CAP.SOC. € 1.500.000 I.V.
REV.4

You might also like