You are on page 1of 2

Senior Electrical Engineer Phone: (123) 456 78 99

Email: info@qwikresume.com
Website: www.qwikresume.com
ROBERT SMITH LinkedIn:
linkedin.com/qwikresume
Address: 1737 Marshville Road,
Alabama.

Objective
Broad experience in Healthcare, Detention, Security, Data Centers and Air & Sea Ports in electrical
engineering, construction, estimating, management, design-build, and business development
gained in leadership and management positions. Effective leadership, problem solving and
analytical skills proved in fast paced environments which require initiative, independent decision
making, and team building.

Skills

Estimating, Designing, Training.

Work Experience
Senior Electrical Engineer
ABC Corporation ­ 2003 – 2008
 Assist in the design of 8 story high-rise resort with guestrooms, restaurants, shops, parking,
and golf cart facilities.
 Designed a new mission-critical port-security facility with control room, training room,
networked intercom, CCTV, and card access system.
 Designed several DOT roads modification projects such as road widening with utility
relocations and street lighting.
 Designed new mission-critical replacement UPS for the IT department at Palmetto Hospital.
 Designed a new port security system utilizing thermal and low-light cameras, virtual trip line
detection software and wireless network 802.11a LAN for video backhaul and video streaming
to roving vehicles for port perimeter security.
 Used many software programs including AutoCAD, SKM Power Tools for Windows, Visual
photometric, Easy power, ETAP.
 Developed own spreadsheet applications for fault current, CCTV field of view applications, and
wireless Fresnel zone modeling for antenna selection.

Senior Electrical Engineer


ABC Corporation ­ 2001 – 2003
 Designed and tested electronics for launch vehicle applications.
 Designed inverter stage of high voltage (150V) brushless motor driver.
 Product was modular design with small footprint using an IGBT bridge Analyzed LVDT
characteristics for thruster position control loop.
 Designed PCB layout for avionics system components.
 Performed detailed part stress analysis and failure modes and effects analysis.
 Assisted in avionics system level testing and integration.
 Maintained electrical ground support equipment..

Education

© This Free Resume Template is the copyright of Qwikresume.com. Usage


Guidelines
BSEE in Electrical Engineering - (University of North Florida)

© This Free Resume Template is the copyright of Qwikresume.com. Usage


Guidelines

You might also like