Professional Documents
Culture Documents
Job Information
Job number BG200014 - 001 Job date 06-08-2020 Client Ecopetrol Well LLanito 177
Rig Independece 204 Country Colombia District Not Listed Assembly date 6/3/2020
Stator serial # 50651 Rotor serial # 50079 Motor serial # 675-3230 Created by Yeisson Reyes
Remarks
Power Section Size 6 3/4 in Power Section Model HyperLineTM 6 3/4 3:4 4.3 ULTRA HF (250)
Vector Tool TM Offset 0.010 in Last Stator Reline Date March 3, 2020 Accumulated Stator Hours 0 Hrs
Shop Temperature 75 degF Elastomer Type WW250 Rotor Coating Type Tungsten Carbide
Manufacturers Specifications
2US 1.5-US US 0.5-US STD 0.5-OS OS 1.5-OS 2OS 3OS
Stator Minor Diameter [in] * - - - - 3.067 - 3.143 - - -
Rotor Mean Diameter [in] - - - - 3.112 - 3.112 - - -
Fit on Surface [in] ** - - - - 0.045 - -0.031 - - -
TM
* Vector Tool Minor Diameter corrected at shop temperature ** Positive fit indicates interference. Negative fit indicates clearance.
Measured Dimensions
2US 1.5-US US 0.5-US STD 0.5-OS OS 1.5-OS 2OS 3OS
Stator Minor Diameter [in] * - - - - 3.080 - - - - -
Rotor Mean Diameter [in] - - - - 3.115 - - - - -
Fit on Surface [in] ** - - - - 0.035 - - - - -
TM
* Vector Tool Minor Diameter ** Positive fit indicates interference. Negative fit indicates clearance.
Avg. Bit Pressure Loss 979.30 psi Downhole Circulating Temperature 116 degF 130 degF
Expected Standpipe Pressure 1600.00 psi True Vertical Depth (TVD) 1195 ft 7509 ft
Expected Run Time 50.00 Hrs Mud Weight 8.9 ppg 9.1 ppg
Max. Expected Diff. Pressure 600.00 psi Min. Expected Diff. Pressure 400.00 psi Avg. Expected Diff. Pressure 500.00 psi
www.weatherford.com
© 2020 Weatherford. All rights reserved
Fit Predictor
Version 1.10. HyperLineTM Smart Toolbox
Results
1.5US - - - -
US - - - -
0.5US - - - -
STD 4.630 % 0.103 in 2.615 mm l Lifetime + Performance 4.570 % 0.101 in 2.578 mm l Lifetime + Performance
0.5OS - - - -
OS 1.960 % 0.036 in 0.924 mm Loose Fit 1.970 % 0.037 in 0.931 mm Loose Fit
1.5OS - - - -
2OS - - - -
3OS - - - -
<< Loose -0.019 0.000 0.019 0.039 0.057 0.075 0.094 0.112 0.130 0.149 0.173 Tight >>
-1.000 -0.019 -0.010 0.000 0.010 0.019 0.029 0.039 0.048 0.057 0.066 0.075 0.083 0.09 0.097 0.105 0.112 0.121 0.130 0.139 0.149 0.161 0.173
On Surface -0.028 -0.019 -0.010 0.000 0.010 0.019 0.029 0.039 0.048 0.065 0.066 0.075 0.083 0.090 0.097 0.105 0.112 0.121 0.130 0.139 0.149 0.161 0.173
t
0.035
Start Depth
Relative Fit t
4.630 % 0.103
0.1
End Depth
Relative Fit t
4.570 % 0.101
0.1
Results are shown in: inches [in] * Based on Vector Tool TM Minor Diameter ** Positive fit indicates interference. Negative fit indicates clearance.
Remarks
1. Normalized Stator Minor Diameter is 3.061 in. Normalized Fit on Surface is 0.045 in. Normalized Target Fit on Surface: from -0.018 in to 0.075 in (Actual Dimensions).
2. Normalized Fluid Velocity, Normalized Sliding Velocity and Normalized Flexing Frequency are: 0.77, 0.78, and 0.21, respectively.
3. Use sensitivity analysis module to determine the acceptable ranges of temperature and swelling/shrinkage percentage.
4. The use of Tungsten Carbide coatings is recommended when the mud flow rate exceeds 85% of maximum allowable mud flow rate.
www.weatherford.com
© 2020 Weatherford. All rights reserved
Fit Predictor
Version 1.10. HyperLineTM Smart Toolbox
Sensitivity Analysis
0.100 2.540
◄ 0.103 in [2.611mm] ◄ 0.101 in [2.575mm]
0.090 2.286
110 120 130 140 Long Lifetime Long Lifetime
43 49 54 60 Good Performance Good Performance
Downhole Temperature [degF] [degC] Initial Relative Fit Final Relative Fit
[ 4.62 % ] [ 4.57 % ]
Sensitivity Analysis Actual Data