OFFICIAL QUALITY MANAGEMENT
HERMANN GUTMANN WERKE AG
Weigenburg, 20.01.04
Certificated Technical Datasheet
Product: GUTBOND style - facades systems
Produce! HERMANN GUTMANN WERKE AG
Namberger Str. 57 - 81
Germany ~ 91781 Weifenburg/ Bavaria
Production Location: HERMANN GUTMANN WERKE AG
Heinrich — Hertz — Str. 9
Germany - 06796 Brenna
4.0 Product
‘The GUTBOND style - facade systems consists of GUTBOND style panels with
thickness of 3, 4 und 6 mm.
GUTBOND style is a composite panel consisting of two aluminium cover sheets in
EN AW-3005 (AlMn‘Mg0,5) in accordance with EN 573-3 and a plastic (LOPE)
core.2.0 Properties and composition:
2.1 Aluminium sheets
‘The face sheets must have a thickness of 0,5 mm with alloy 3005 H42 based
on DIN 485 ~ 2 and must show the following properties:
2.4.1 Composition basic material
DIN EN 573-3 (in % of mass, rest! AL)
Alloy: EN AW 3005 H 42
( AlMntMgo,5)
Si Fe | Cu | MN | Mg | Gr | Zn Ti ‘comment ‘other elements
single all
06 | o7 | 03 | 10 | O2- | 010 | O25 | on = 0.05 | 0.15
-i5 | 06
2.4.2 Mechanical
E-modul = 270.000 Nim’
Tensile strength Ry 2 140 Nimm*
0,2 % - Yield strength Rooz = 9 Némm?
Elongation Aw =
2.2 Core and glue
Following material is used for the core:
Core Sheet product name ‘density ‘core colour
Polyethylen — GUTBOND style 7B2 0,900 - 0,840 ‘ransparent
low density
The used glue is based as well as the core material on LPDE.
Both products are used in the food industry and they are in accordance with the terms of food safe.
The basic material as well as the material which is used in the production is described and
determined.
According to our standard of knowledge there is no danger if an appropriate and professional
acquaintance with the product is provided.Tull mposite Pans [TOND style)
23.1 mechanical properties
‘Composite panel thickness tolerances weight
Imm] Imm] Ig’
GUTBOND style /B2 ‘3mm #02 45
4mm +02 55
6mm +H-0,2 73
23.2 Peel strength
Test method requirements
Climbing drum peel test based Peel strength
On standard ASTM 1781 252 Nmmimm
3.0 ing / PVDE
GUTBOND style Panels lacquered with PVDF coating and produced in accordance with Standard
DIN EN 1396 - (Coil coated sheet and strip for generall applications). This Norm rules points like
abrasion resistance, coating salt spray test, impact test, weathering and corrosion
HERMANN GUTMANN WE!
BEREICH GUTBOND
Narnberger Str. 87 - 81 /
Wl 21761 Weipenburg
Telefon: +49 9141/
us
GUTMANN Telefax: +49 914
HERMANN GUTMANN WERKE AG.
Director quality managment
Mr. Martin Reitlinger