Professional Documents
Culture Documents
Parameter Specification
Minimum Sample Period—Real-Time Busmaster dependent:
—Recorded PCD Every 9
seconds
HCIM/CIM Calculated by
INSITE before
Hang-Off Collar
Nominal ID 2.815 inches through ID, no through bore when tool is installed
Connections NC-38 (3.5 in. IF) Box x NC-38 (3.5 in. IF) Pin
Make-Up Torque 9,900–10,900 ft-lb
Slim Phase 4
Connections NC-38 (3.5 inches IF) Box x NC-38 (3.5 inches IF) Box
Operating Parameters
Equivalent Bending Stiffness Slim Phase 4 String only (22.5 ft length) = 2.25 in. ID × 4.656 in. OD
Slim Phase 4 String and HOC (39.5 ft length) = 2.25 in. ID × 4.679 in. OD
Maximum Dogleg Severity Rotating = 14 degrees/100 ft
Non-rotating = 30 degrees/100 ft
4、DGR Measurement Capability
Parameter Specification
Recommended minimum sample period 8 seconds