Professional Documents
Culture Documents
8 countersunk bolts with S275 - Blue Book - Steel for Life 21/07/2020, 14)08
EUROCODE 3 (IN ACCORDANCE WITH THE UK NATIONAL ANNEX) BS EN 1993-1-8: 2005, BS EN ISO 4014: 2011, BS EN ISO 4017: 2014
Minimum
Diameter of bolt Bearing resistance (kN)
End distance Edge distance Pitch Gauge
d
e1 e2 p1 p2 Thickness in mm of ply
mm
mm mm mm mm 5 6 7 8 9 10 12 15 20 25 30
12 25 20 35 40 10.6 15.8 21.1 26.4 31.7 37 47.5 63.4 89.8 116 143
16 35 25 50 50 7.4 14.9 22.3 29.8 37.2 44.7 59.6 81.9 119 156 194
20 40 30 60 60 0 8.4 16.8 25.3 33.7 42.1 58.9 84.2 126 168 211
Minimum
Diameter of bolt Bearing resistance (kN)
End distance Edge distance Pitch Gauge
d
e1 e2 p1 p2 Thickness in mm of ply
mm
mm mm mm mm 5 6 7 8 9 10 12 15 20 25 30
12 40 25 50 45 18.5 27.8 37 46.3 55.5 64.8 83.3 111 157 204 250
16 50 30 65 55 12.1 24.3 36.4 48.6 60.7 72.9 97.2 134 194 255 316
20 60 35 80 70 0 14.9 29.8 44.7 59.6 74.5 104 149 224 298 373
30 90 50 115 100 0 0 0 11.2 33.5 55.9 101 168 280 391 503
See clause 3.7(1) of BS EN 1993-1-8: 2005 for calculation of the design resistance of a group of fasteners
Values of bearing resistance in bold are less than the single shear resistance of the bolt
Values of bearing resistance in italic are greater than the double shear resistance of the bolt
Bearing values assume standard clearance holes
If oversize or short slotted holes are used, bearing values should be multiplied by 0.8
If long slotted or kidney shaped holes are used, bearing values should be multiplied by 0.6
In single lap joints with only one bolt row, the design bearing resistance for each bolt should be limited to 1.5fu d t / γM2
https://www.steelforlifebluebook.co.uk/bolts-welds/ec3-ukna/nonpreloaded-countersunk-class88-s275/ Page 1 of 2
Non preloaded bolts - Property Class 8.8 countersunk bolts with S275 - Blue Book - Steel for Life 21/07/2020, 14)08
https://www.steelforlifebluebook.co.uk/bolts-welds/ec3-ukna/nonpreloaded-countersunk-class88-s275/ Page 2 of 2