Professional Documents
Culture Documents
Working temp. + 5 °C to + 30 °C
TESTED
TESTED
THE NUMBER 1 FOR PROFESSIONAL USERS
Minimum Time with Maximum Performance
If you compare the properties of the ° The preliminary examinations that ° Along with simple hand-held guns,
injection procedures found today for were necessary for selecting the there are two professional ma-
subsequent production of cross-sec- procedure when using liquid injec- chines that can also be used to in-
tion waterproofing or the product tion materials are no longer neces- ject Kiesol C: the EP 60 Piston
systems that are available, Kiesol C sary since Kiesol C can be used for Pump made by Desoi and the
has considerable advantages com- any degree of moisture saturation. Injection Pump DCE-R made by
pared to liquid product systems and Dittmann.
also compared to other products in ° Because the boreholes are hori-
cream form that are on the market. zontal and slim, the time needed The use of Kiesol C is therefore the
for drilling and the quantity of ma- most effecient procedure for most
° Kiesol C is WTA tested and certified terial required to fill the boreholes subsequently placed horizontal barri-
for injection under gravity up to a is greatly minimised. ers.
degree of moisture saturation of
95 %. The Test Report is available ° And since the boreholes are so
on request. slim, it is no longer necessary to
subsequently fill them with
Injection Mortar.
869 / 12.14 GB