Professional Documents
Culture Documents
It consists of – STRINGER
PARTS OF TYPICAL SLAB FORMWORK
· Sole plates
· Wedges SLAB EDGE PROP
INSULATION GIRDER
· Props
· Head tree PANEL END SUPPORT
SUSPENDED SLAB
· Planks
· Batten FIRE RESISTANT
LEDGER
· Ledgers INSULATION SHORE HEAD
WEDGE
Wall formwork used for concreting of shear or RCC wall in
dams, wing walls, basement rcc walls etc. Wall shuttering
made up of vertically arranged upright timbers (bearers) to BRICK VENEER
TIMBER SPACER
which plywood sheeting boards are nailed at the inner side.
The upright timbers are diagonally braced with the help of
BOLT WITH NUT HEAD
boards at both sides.
STRUTS AT EQUAL WOOD FORMS
SPACING REBAR
It is extremely low as compared to the other concrete
because the actual forces are very low against it. BOARDING
WIRE SNAP TIES
The panel on both sides has been put in position, the tie is
used as a spacer.
WEDGE
Wall support systems are usually sloped at satisfactory
intervals. BRACINGS CONCRETE WALL
CONCRETE WALL
It consists of DOWEL INTO WALERS
· Timber sheeting STAKES FOOTING
· Vertical posts
· Horizontal members WOODEN BLOCKS
· Rackers PACKING
SOLE PLATE
· Stakes FOOTING
· Wedges
SECTION THROUGH FOUNDATION WALL
FORMWORK OF RCC WALL