Professional Documents
Culture Documents
Lote
Tipo Sublote Disciplina Número Nombre del Documento Revisión Fecha
DOC NA ME 500 Piping Class Specifications R1 02/10/2018
DISEÑÓ NO OBJECIÓN
PARTICIPANTES DEL DISEÑO:
ALEGRÍA ADELL JULIÁN, JUAN MANUEL MEDINA DEL RÍO
________________________________
ISRAEL SÁNCHEZ/PALOMO GARCÍA
_______________________________
GLORIA GIRALDO LAVERDE
Pipe Code B31.3 Carbon Steel Underground Pipe Material Group 1.1 ACC1
Diameter Temp ºC -28/37 93 148 204 260 315 343 371 398 426
Carbon steel Sheet 1 of 2
1/2" - 48" Press Barg 18,46 17,93 15,86 13,79 11,72 9,65 8,62 7,58 6,55 5,52
Pipes
Flanges
Note 4: Use A105 FF ASME B16.5 150# flanges for butterfly valves.
Note 5: Class B up to pressure 5.93 bar, class D up to 10.34 bar, class E up to 18.96 bar
Note 6: WN flanges shall be designed with the same schedule as the pipe attached.
Note 7: Flanges connected to the equipments will be the same type as the equipment flanges.
Fittings
Note 8: When so specified in design drawings, ≤ 2" threaded fittings could be used with 3000#.
Note 9: Fittings shall be designed with the same schedule as the pipe attached
Gaskets
Size Material Description
(T≤ 100ºC) C 4430-TYPE ASBESTOS FREE FIBER, ICP 9400 OR SIMILAR ASME B16.21 THK 1,5 mm 150# / 300#
1/2" - 24" (100ºC<T<230ºC) 800 SERIES MULTI-DIRECT EXPANDED PTFE OR SIMILAR ASME B16.21 THK 1,5 mm 150# / 300#
(STEAM, GAS AT T>180ºC, LIQUID AT T>230ºC) 316L SS WITH CS OUTER RING SPIRAL WOUND ASME B16.20 150# / 300#
(T≤ 100ºC) C 4430-TYPE ASBESTOS FREE FIBER, ICP 9400 OR SIMILAR ASME B16.47 THK 3 mm 150#
28" - 64" (100ºC<T<230ºC) 800 SERIES MULTI-DIRECT EXPANDED PTFE OR SIMILAR ASME B16.47 THK 3 mm 150#
(STEAM, GAS AT T>180ºC, LIQUID AT T>230ºC) 316L SS WITH CS OUTER RING SPIRAL WOUND ASME B16.47 150#
Branches
- Cleanless (ISO 8501): Sa 2-1/2, Roughness (ISO 8503) Grade Medium G (50-85 μm, Ry5)
- Inner linning: Two (2) layers Phenolic Epoxy 880 NDFT 220 microns
- Outer priming: high build epoxy NDFT 155 microns
- Outer linning: Top coat shall be applied in Three (3) Polyethylene layers NDFT 3 mm
Revision 0 Document
Pipes
Flanges
Note 4: Use A105 FF ASME B16.5 150# flanges for butterfly valves.
Note 5: Class B up to pressure 5.93 bar, class D up to 10.34 bar, class E up to 18.96 bar
Note 6: WN flanges shall be designed with the same schedule as the pipe attached.
Note 7: Flanges connected to the equipments will be the same type as the equipment flanges.
Fittings
Note 8: When so specified in design drawings, ≤ 2" threaded fittings could be used with 3000#.
Note 9: Fittings shall be designed with the same schedule as the pipe attached
Gaskets
Size Material Description
(T≤ 100ºC) C 4430-TYPE ASBESTOS FREE FIBER, ICP 9400 OR SIMILAR ASME B16.21 THK 1,5 mm 150# / 300#
1/2" - 24" (100ºC<T<230ºC) 800 SERIES MULTI-DIRECT EXPANDED PTFE OR SIMILAR ASME B16.21 THK 1,5 mm 150# / 300#
(STEAM, GAS AT T>180ºC, LIQUID AT T>230ºC) 316L SS WITH CS OUTER RING SPIRAL WOUND ASME B16.20 150# / 300#
(T≤ 100ºC) C 4430-TYPE ASBESTOS FREE FIBER, ICP 9400 OR SIMILAR ASME B16.47 THK 3 mm 150#
28" - 64" (100ºC<T<230ºC) 800 SERIES MULTI-DIRECT EXPANDED PTFE OR SIMILAR ASME B16.47 THK 3 mm 150#
(STEAM, GAS AT T>180ºC, LIQUID AT T>230ºC) 316L SS WITH CS OUTER RING SPIRAL WOUND ASME B16.47 150#
Branches
- Cleanless (ISO 8501): Sa 2-1/2, Roughness (ISO 8503) Grade Medium G (50-85 μm, Ry5)
- Outer linning: 300 microns epoxy poliamide type SIGMASHIELD 880
Revision 0 Document
TABLA DE INJERTOS ACERO CARBONO ACC2
Revision 0 Document
Date 23/07/18 General Piping Class Specifications
Pipe Code B31.3 Stainless Steel AISI 304 L ACX1
Diameter Temp ºC -28/37 93 148 204 260 315 343 371 398
Stainless Steel Sheet 1 of 2
1/2" - 24" Press Barg 18,96 16,2 14,82 13,4 11,7 9,7 8,6 7,6 6,55
Pipes
Size Material Description Schedule Ends
1/2" - 2" A312 - TP304 (SEAMLESS) ASME B36.19 40S SW
2 1/2" - 30" A312 - TP304 ASME B36.19 10S BW
32" - 48" A312 - TP304 ASME B36.10 STD BW
52" - 60" A312 - TP304 ASME B36.10 10,31mm BW
> 60" A312 - TP304 ASME B36.10 10,31mm BW
Flanges
Note 3: Use A182 GR.F316 FF ASME B16.5 150# flanges for butterfly valves.
Note 4: WN flanges shall be designed with the same schedule as the pipe attached.
Note 5: Flanges connected to the equipments will be the same type as the equipment flanges.
Fittings
Note 6: Fittings shall be designed with the same schedule as the pipe attached
Gaskets
Size Material Description
(T≤ 100ºC) C 4430-TYPE ASBESTOS FREE FIBER, ICP 9400 OR SIMILAR ASME B16.21 THK 1,5 mm 150# / 300#
1/2" - 24" (100ºC<T<230ºC) 800 SERIES MULTI-DIRECT EXPANDED PTFE OR SIMILAR ASME B16.21 THK 1,5 mm 150# / 300#
(STEAM, GAS AT T>180ºC, LIQUID AT T>230ºC) 316L SS WITH CS OUTER RING SPIRAL WOUND ASME B16.20 150# / 300#
(T≤ 100ºC) C 4430-TYPE ASBESTOS FREE FIBER, ICP 9400 OR SIMILAR ASME B16.47 THK 3 mm 150#
28" - 64" (100ºC<T<230ºC) 800 SERIES MULTI-DIRECT EXPANDED PTFE OR SIMILAR ASME B16.47 THK 3 mm 150#
(STEAM, GAS AT T>180ºC, LIQUID AT T>230ºC) 316L SS WITH CS OUTER RING SPIRAL WOUND ASME B16.47 150#
Branch
See Branch table
TABLA DE INJERTOS ACERO INOXIDABLE ACX1
Revision 0 Document
Date 23/07/18 General Piping class Specifications
Pipe Code B31.3 Class 150 Material Group 2.3 ACX2
Diameter Temp ºC -28/37 93 148 204 260 315 343 371 398
Stainless Steel Sheet 1 of 2
1/2" - 24" Press Barg 18,96 16,2 14,82 13,4 11,7 9,7 8,6 7,6 6,55
Pipes
Size Material Description Schedule Ends
1/2" - 2" A312 - TP316 (SEAMLESS) ASME B36.19 40S SW
2 1/2" - 30" A312 - TP316 ASME B36.19 10S BW
32" - 48" A312 - TP316 ASME B36.10 STD BW
52" - 60" A312 - TP316 ASME B36.10 10,31mm BW
> 60" A312 - TP316 ASME B36.10 10,31mm BW
Flanges
Note 3: Use A182 GR.F316 FF ASME B16.5 150# flanges for butterfly valves.
Note 4: WN flanges shall be designed with the same schedule as the pipe attached.
Note 5: Flanges connected to the equipments will be the same type as the equipment flanges.
Fittings
Note 6: Fittings shall be designed with the same schedule as the pipe attached
Gaskets
Size Material Description
(T≤ 100ºC) C 4430-TYPE ASBESTOS FREE FIBER, ICP 9400 OR SIMILAR ASME B16.21 THK 1,5 mm 150# / 300#
1/2" - 24" (100ºC<T<230ºC) 800 SERIES MULTI-DIRECT EXPANDED PTFE OR SIMILAR ASME B16.21 THK 1,5 mm 150# / 300#
(STEAM, GAS AT T>180ºC, LIQUID AT T>230ºC) 316L SS WITH CS OUTER RING SPIRAL WOUND ASME B16.20 150# / 300#
(T≤ 100ºC) C 4430-TYPE ASBESTOS FREE FIBER, ICP 9400 OR SIMILAR ASME B16.47 THK 3 mm 150#
28" - 64" (100ºC<T<230ºC) 800 SERIES MULTI-DIRECT EXPANDED PTFE OR SIMILAR ASME B16.47 THK 3 mm 150#
(STEAM, GAS AT T>180ºC, LIQUID AT T>230ºC) 316L SS WITH CS OUTER RING SPIRAL WOUND ASME B16.47 150#
Branch
See Branch table
TABLA DE INJERTOS ACERO CARBONO ACC2
Pipe
Flanges
Note 1: Flanges connected to the equipments will be the same type as the equipment flanges.
Fittings
Gaskets
Joints
Valves
Branch
d 16 d 20 d 25 d 32 d 40 d 50 d 63 d 75 d 110 d 160 d 225 d 280 d 315 d 355 d 400 d 450 d 500 d 630
d 16 TSW TRSW TRSW TRSW TRSW TRSW+r TSW+r TSW+r TSW+r LTRBW+R STRBW+R STRBW+R LTRBW+R T+R T+R T+R T+R T+R
d 20 TSW TRSW TRSW TRSW TRSW TSW+r TSW+r TSW+r LTRBW+R STRBW+R STRBW+R LTRBW+R T+R T+R T+R T+R T+R
d 25 TSW TRSW TRSW TRSW TSW+r TSW+r TSW+r LTRBW+R STRBW+R STRBW+R LTRBW+R T+R T+R T+R T+R T+R
d 32 TSW TRSW TRSW TSW+r TSW+r TSW+r LTRBW+R STRBW+R STRBW+R LTRBW+R T+R T+R T+R T+R T+R
d 40 TSW TRSW TSW+r TSW+r TSW+r LTRBW+R STRBW+R STRBW+R LTRBW+R T+R T+R T+R T+R T+R
d 50 TSW TSW+r TSW+r TSW+r LTRBW STRBW STRBW+R LTRBW+R T+R T+R T+R T+R T+R
d 63 TSW TSW+r TSW+r LTRBW STRBW STRBW+R LTRBW+R T+R T+R T+R T+R T+R
d 75 TSW TSW+r LTRBW STRBW STRBW+R LTRBW+R T+R T+R T+R T+R T+R
d 110 TSW LTRBW STRBW STRBW LTRBW T+R T+R T+R T+R T+R
d 160 T STRBW STRBW LTRBW T+R T+R T+R T+R T+R
d 225 T T+R T+R T+R T+R T+R T+R T+R
d 280 T LTRBW T+R T+R T+R T+R T+R
d 315 T T+R T+R T+R T+R T+R
d 355 T T+R T+R T+R T+R
d 400 T T+R T+R T+R
d 450 T T+R T+R
d 500 T T+R
d 630 T
Pipes
Flanges
Fittings
Gaskets
Size Material Description
d 16 - d 1200 FLAT GASKET EPDM (T<40ºC) DIN 16962
d 16 - d 1200 FLAT GASKET FPM (T>40ºC) DIN 16962
Joints
Valves
See Sheet 3
Branch
See Sheet 2
Diameter Temp ºC 20 40 60 70
Polypropylene H Sheet 2 of 2
DN 16 - DN 1000 Press Barg 7,8 6,4 4,2 3,5
Branch
d 16 d 20 d 25 d 32 d 40 d 50 d 63 d 75 d 90 d 110 d 125 d 140 d 160 d 180 d 200 d 225 d 250 d 280 d 315 d 355 d 400 d 450 d 500 d 560 d 630 d 710 d 800 d 900 d 1000
d 16 TSW TRSW TRSW TRSW+r TRSW+r TRSW+r TRSW+r TRSW+r TRSW+r TRSW+r D D D D D D D D D D D D D D D D D D D
d 20 TSW TRSW TRSW TRSW TRSW TRSW+r TRSW+r TRSW+r TRSW+r D D D D D D D D D D D D D D D D D D D
d 25 TSW TRSW TRSW TRSW TRSW TRSW+r TRSW+r TRSW+r D D D D D D D D D D D D D D D D D D D
d 32 TSW TRSW TRSW TRSW TRSW TRSW TRSW TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R D D D D D D D D D D D D D
d 40 TSW TRSW TRSW TRSW TRSW TRSW TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R D D D D D D D D D D D D D
d 50 TSW TRSW TRSW TRSW TRSW TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R D D D D D D D D D
d 63 TSW TRSW TRSW TRSW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R D D D D D D D D D
d 75 TSW TRSW TRSW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R D D D D D D D
d 90 TSW TRSW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW TRBW TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R D D D D D
d 110 TSW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW+R TRBW+R TRBW+R D D D D D
d 125 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW+R TRBW+R TRBW+R D D D D D
d 140 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW+R D D D D D
d 160 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R D D D D D
d 180 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW D D D D D
d 200 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW+R TRBW+R TRBW+R D
d 225 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R
d 250 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW+R TRBW+R TRBW+R TRBW+R
d 280 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW+R TRBW+R TRBW+R
d 315 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R TRBW+R TRBW+R
d 355 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW+R
d 400 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW TRBW
d 450 T TRBW TRBW TRBW TRBW TRBW TRBW TRBW
d 500 T TRBW TRBW TRBW TRBW TRBW TRBW
d 560 T TRBW TRBW TRBW TRBW TRBW
d 630 T TRBW TRBW TRBW TRBW
d 710 T TRBW TRBW TRBW
d 800 T TRBW TRBW
d 900 T TRBW
d 1000 T
Pipe
Flanges
Note 1: Flanges connected to the equipments will be the same type as the equipment flanges.
Fittings
Gaskets
Joints
Branch