Professional Documents
Culture Documents
EDUCATION----------------------------------------------------------------------------------------------------------------------------------- ---------
Nirma University
M.Tech – Electrical Engineering (EPS) CGPA: 7.8/10.00 Pursuing
Nirma University
B.Tech – Electrical Engineering CGPA: 7.17/10.00 2019
GSHSEB
12th Aggregate:52/100 2014
GSEB
10th Aggregate:76/100 2012
INTERNSHIP--------------------------------------------------------------------------------------------------------------------------------------------
I did industrial training at NBE motors ltd under the Surface Team & Workshop section on the subject of Electrical
Drives and Motors.
i did work in maintenance department and autocad design on solar rooftop section and different parameters.
Load calculation and GEDA registration and routine maintenance
TECHNICAL PROJECTS----------------------------------------------------------------------------------------------------------------------------
Study of Two-Level Inverter with Different PWM Techniques for voltage and frequency control
This project did study on two level inverters and its pwm techniques with PSIM simulation along with its space
phasor structure and problems associated with two level inverters also discussed.
3 Level, 4 Level, 5 Level inverters with SVPWM Technique in Which Induction Motor Is Taken as Load
This project did study on multilevel inverter like diode clamped and flying capacitor with simulation in PSIM and
observed that by introducing zero state in space phasor structure induction motor rotating vector demand can be
fulfilled very accurately because of more sectors accuracy increases, as well as rating of IGBT switches also reduces by
use of multilevel inverters.
SOFTWARE KNOWLEDGE-/SKILLS------------------------------------------------------------------------------------------------------------
EXTRACURRICULAR ACTIVITIES-------------------------------------------------------------------------------------------------------------
o Attended expert lecture on Switchgears and Protection done by Dr.Bhuvanesh Oza.
o Took elective of AI and OPF, UC (unit commitment) where brief research are going on based on
Load flow contingency analysis studied.