Professional Documents
Culture Documents
9710
Local Contact:
PFM Engineering Pte Ltd
21 Bukit Batok Crescent #20-79 WCEGA Tower Singapore 658065
Tel: 62789700, Fax: 62789671
Email: sales@pfmeng.com Web: www.pfmeng.com
Co.Reg.No. 197600505C
Dimensions And Weights Data Sheet 700.9710
900 lb
¾” 172 135 210 5.6 ¾” 273 273 170 250 18 15
150 lb
1500 lb
300 lb
½” 165 165 120 180 4.6 2.8 ½” 264 264 160 240 17 11
2500 lb
600 lb
¾” 191 191 140 210 7.2 4.4 ¾” 308 273 170 250 20 15
1” 216 216 165 240 9.4 5.5 1” 308 308 177 260 23 15
1½” 241 241 200 270 16.4 8.8 1½” 387 231 280 380 51 32
CONNECTION: Clamps or special flanges Strainers should be installed as close as possible to the machinery or
SCREEN: Double or triple layers (mesh on perf. Plate, mesh on mesh), valve to be protected. The arrow cast on the strainer body must point
magnetic assemblies to the direction of the flow.
DRAIN: Any combination of nipples, flanges, valves and plugs. For installation on horizontal or inclined pipelines, the screen housing
VENT: Optional connection must be below the pipeline.
DP GAUGE: Optional connections Never install a “Y” type strainer on vertical pipelines with flow
LINING: Epoxy directed upwards. Refer to the figures below (a special Conaco™
OATING: Any painting cycle patented ‘Y’ strainer configuration is available when installation on
vertical upwards lines is unavoidable.
How To Order
Always specify: type – rating – end connections – size – body/screen material – filtering degree – drain type.
Example: No 1 Type 777.2 - #300RF – 1” WCB/304 – 0.8mm perf – ½”NPT Plug
Ask our technical department for the correct sizing with the lowest pressure drop for your application.
Local Contact:
PFM Engineering Pte Ltd
21 Bukit Batok Crescent #20-79 WCEGA Tower Singapore 658065
Tel: 62789700, Fax: 62789671
Email: sales@pfmeng.com Web: www.pfmeng.com
Co.Reg.No. 197600505C