Professional Documents
Culture Documents
Ce134 RP#1
Ce134 RP#1
INSTRUCTIONS: SOLVE THE FOLLOWING PROBLEMS. SHOW COMPLETE SOLUTION. REFER TO NSCP
2010/NSCP 2015. WRITE THE FORMULAS AND PROVISIONS USED IF ANY.
SITUATION 1: In the figure shown using effective length of 3.5 m and Fy = 248 MPa,
SITUATION 2: A steel plate is 360 mm wide and 20 mm thick with four bolt holes 25 mm ϕ
cut into the plate as shown in the figure.
1. Find the nearest value of b so that the net width along the bolts 1-2-3-4 is equal
to the net width of the bolts 1-2-4.
a. 15.55 mm b. 19.71 c. 22.56 d. 28.16
3. Find the value of P so that the allowable tensile stresses will not be exceeded.
a. 724.73 kN b. 776.55 c. 844.56 d. 853.68