Professional Documents
Culture Documents
specifications
Overall dimensions
Tails jig 44 x 30 x 19 cm 17" x 12" x 8"
Pins jig 40 x 30 x 20 cm 16" x 12" x 8"
Tail spacing
At 7 degrees, 19 mm stock 20 mm and up 25/32" and up
At 15 degrees, 19 mm stock 40 mm and up 1 18/32" and up
The spacers in the plans are 30 mm wide, but spacers of different width can
be used.
Table saw
Table saw must have a guide bar that is no more than 15 cm (6") from the
blade. If it is more than that, you will need to make the bases wider.
Regular saw blades (with alternating set) or blades with a straight set can be
used.