Professional Documents
Culture Documents
HIN - Door Hardware Shower Cubicle Fitting Glass Hardware PDF
HIN - Door Hardware Shower Cubicle Fitting Glass Hardware PDF
The single component in different executions and finishes offer you system
technology for the glass door also in high-end quality: locks, hinges and levers
made of aluminium, zinc-diecasting or stainless steel for the use on glass doors
based on DIN 18251 and EN 1906. With their form, construction and surface
they comply with the holistic solutions of door hardware. The complete
programme of glass door handles has been well thought through. It is
completed by hinges, handle sets & lock combinations as well as door closers
and floor springs.
Glass Door Hardware
} Patch Fittings
Bottom patch
Top patch
Overpanel patch
163
Note: For Floor Spring refer Floor Spring Catalogue & Euro profile cylinder (60 mm) refer Locking Solution Catalogue and Order Separately
Glass Connectors
Wall to glass one panel
} Weight carrying capacity
20 kg/pair
} 3 Point Fixing
} Diameter: 35 mm, Material Thickness: 1.35 mm
} Centre to centre bottom (C1): 925 mm, Centre to centre upper (C2): 725 mm
} End to end: 1800 mm
} Same version DIN left and DIN right
} Material: Stainless steel
} 3 Point Fixing
} Diameter: 35 mm, Material Thickness: 1.35 mm
} Centre to centre bottom (C1): 925 mm, Centre to centre upper (C2): 925 mm
} End to end: 2000 mm
} Same version DIN left and DIN right
} Material: Stainless steel
} 3 Point Fixing
} Diameter: 35 mm, Material Thickness: 1.35 mm
} Centre to centre bottom (C1): 1125 mm, Centre to centre upper (C2): 1125 mm
} End to end: 2400 mm
} Same version DIN left and DIN right
} Material: Stainless steel
Note: Back to back fixing is for glass & wooden shutter for both side installation
Note: Bolt through fixing is for Wooden shutter when handle on one side
Glass Door Hardware
} Pull Handles
} Installation height: 85 mm
} Opening diameter: 12 mm
} Fastening screws included.
} Material: Stainless steel
} Finish: Satin & Polished
Note: Back to back fixing is for glass & wooden shutter for both side installation
Note: Bolt through fixing is for Wooden shutter when handle on one side
Glass Door Hardware
} Pull Handles
Note: Back to back fixing is for glass & wooden shutter for both side installation
Note: Bolt through fixing is for Wooden shutter when handle on one side
Shower Hardware
} Shower Hinges
Connectors (Material: Brass with Chrome plating; For 8-12 mm Glass thickness)
51
∅14
Glass cut-out
2-Ø14
Glass cut-out
2-Ø14
Glass cut-out
2-Ø14
Glass cut-out
Pro-Series Hinges (Material: Brass with Chrome plating; For 8-12 mm Glass thickness)
39
HSH-OWNO: 90° Glass to wall Hinge 2-R8 37.5
Glass cut-out
39
HSH-OWWO: 90° Glass to wall Hinge 2-R8 37.5
2.5
} Tested for 100,000 cycles
63
58
2.5
Glass cut-out
2.5
63
58
2.5
Glass cut-out
4
HSH-OGAO: 90° Glass to Glass Hinge 39 39
2-R8 37.5 37.5 2-R8
(Self-closing from 30°)
2.5
} Tested for 100,000 cycles
2.5
63
63
58
58
2.5
Glass cut-out
2.5
Description Unit Article No. PU
HSH-OGAO: 90° Glass to Glass Hinge Pc 9 228 312 01
(Self-closing from 30°)
4
39 39
HSH-OGCO: 135° Glass to Glass Hinge 2-R8 37.5 37.5 2-R8
2.5
(Self-closing from 30°)
2.5
63
58
58
2.5
Glass cut-out
2.5
63
58
58
2.5
Glass cut-out
2.5
Premium-Series Hinges (Material: Brass with Chrome plating; For 8-12 mm Glass thickness)
40 38
HSH-11: 90° Wall to Glass Hinge
(Self-closing from 30°)
2-R8 2-R8
} Tested for 100,000 cycles
63
2-R6
Glass cut-out
63
63
2-R6 2-R6
Glass cut-out
63
63
2-R6 2-R6
Glass cut-out
4
HSH-14: 180° Glass to Glass Hinge
(Self-closing from 30°) 40 38 38 40
63
2-R6 2-R6
Glass cut-out
Shower Knobs (Material: Brass with Chrome plating; For 8-12 mm Glass thickness)
Wall and Bottom seal for Glass Extruded with water run-off plate Unit Article no. PU
HSDS8-009: For 8 mm glass, 2400 mm length, soft whisker Pc 9 228 446 01
HSDS10-009: For 10 mm glass, 2400 mm length, soft whisker
Pc 9 228 447 01
Weather Seal used between Door & Side panel opposite the hinge Unit Article no. PU
HDS8-007: For 8 mm glass, 2400 mm length, soft whisker Pc 9 228 448 01
HDS10-007: For 10 mm glass, 2400 mm length, soft whisker
Pc 9 228 449 01
Central Glass seal for sealing double action Door & wall Unit Article no. PU
HSDS8-001: For 8 mm glass, 2400 mm length, soft whisker Pc 9 228 450 01
HSDS10-001: For 10 mm glass, 2400 mm length, soft whisker
Pc 9 228 451 01
Universal connector for Header bar (With Adjustable Angle) Unit Article no. PU
HSHAC-828: Universal Rail Connector Brass, For Pc 9 228 601 01
Diameter 19 mm Polished Stainless Steel
HSHAC-828: Universal Rail Connector Brass, For Pc 9 228 602 01
Diameter 19 mm Satin Stainless Steel
Shower Header bar and Connecting Fittings
11_2017
Fax: +91 22 2674 3267 Fax: +91 11 4889 4044 Tel: + 91 26 5656 9003
Application Centres:
New Delhi: Mumbai: Chennai:
61, Panchkuian Road, 202, Durolite House, Opp. SAB TV, “Heavitree”, Ground Floor,
New Delhi - 110 001 New Link Road, Andheri ( West), 47, Spur Tank Road,
Ph. No. : +91 11 2358 0713, Mumbai - 400 053 Chetpet, Chennai - 600 031
2358 4603 Ph.No. : +91 22 2639 9707 Ph. No. : +91 44 4263 7227