Professional Documents
Culture Documents
01 1
1.01
uPVC DOORS
uPVC DOORS
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
AVAILABLE COLOURS:
White 9010
Ivory 1015
Grey 7015
Black 9005
Navy 5011
Red 3003
Green 6005
Silver 7001
Oregon pine
Part M doors
Letter boxes
A door unit with a single side light must be at least 1470 mm wide to accommodate a letter box in
the side light.
A door unit with a double side light must be at least 1970 mm wide to accommodate a letterbox in
the side light.
Points to remember
Any Glazed door over 2250 mm in height must have a fan light.
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
Raw material
The door is manufactured from multi chamber profiles, extruded from a high impact strength
modified uPVC compound.
Reinforcement
The door uses aluminium reinforcing extruded from 6063 alloy to BS 1474: 1987 specification for
wrought aluminium alloy for general engineering purpose bars and section.
Doors are hung on three 2D lift off hinges. All doors come fitted with a multi point locking system.
This consists of a reversible latch bolt, a series of adjustable cams and a protector bolt. The locking
system is operated by a lever handle and a five- lever cylinder dead lock. Split Spindle available on
request. Hardware comes in a choice of black, white, brass, chrome, or brushed chrome.
Construction
The door uses heat- welded joints and is double rebated. Both door and frame carry EPDM seals to
ensure weather tightness.
Infill panels
The door may be supplied either with a full or part infill panel or fully or partially glazed. The panel
used is of 24 mm / 36mm thickness comprising 2 no. 1.8 mm uPVC skins separated by foam. The
uPVC sheeting from which the skins are formed, is supplied by Veka. The foam is an extruded
polystyrene foam containing a halogenated flame retarded system from the Dow Chemical
Company.
Glazing
Doors are supplied with double glazed or triple glazed units. These units are Argon filled as
standard for improved thermal performance and can be specified to incorporate low emissivity
softcoat glass. The glazed unit is exclusive to Munster Joinery UK and carries a BSI kite mark to BS
EN 1279: 1979 ref. Kite Mark License no. KM 52169. The unit incorporates toughened safety glass
certified to BS EN12150 class A ref. Kite Mark License no. 52172.
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
Safety
Quality
Installation
The door is installed by trained Munster Joinery UK personnel. Fitting is by means of galvanised
steel fitting straps, fixed to the frame and attached to the masonry by means of proprietary fixings.
10 x 100 mm bolts to fix the door directly to brick work.
5 x 80 mm screws to fix the door to the cavity closer.
Building regulations
Thermal insulation: The door complies with the requirements of part L of the Building
Regulations in regard to conservation of fuel and energy.
Disabled access: When installed as per Munster Joinery part M threshold detail, the door
complies with part M of the Building Regulations.
All Front doors to be fitted with laminated glass, split spindle, Thumb screw barrel NHBC
requirements (this must be confirmed at Pre start site meeting)
Vents
Doors can be fitted with trickle vents, head vents or acoustic vents.
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016
MUNSTER JOINERY UK LTD. - TECHNICAL INFORMATION SHEETS
Title: uPVC Doors
Sheet No.: 1.01 Rev: D Date issued: 01/02/2016